Rabu, 21 Desember 2016

Grouping control system based on application , infra red on sensor , CONCEPT OF CONTROL SYSTEM, CONTROL SYSTEM OPEN and CLOSED AND EXAMPLES OF APPLICATION AMNIMARJESLOW AL DO FOUR DO AL ONE LJBUSAF thankyume



glimpse the meaning of automated are: a technology that connects the mechanical system, electrical, and electronics in conjunction with the information system with a view to controlling production .
Secondly, this automatic also can be interpreted a tool by increasing the quality, productivity, safety, and consistency (provision) of a series of operations are repeated. Third, it can also automatically translate the technology integration of measurement, control and information to manage a process or a complicated system. Overall automatically be defined as a technology in which a process or procedure is executed without human assistance. It all can be implemented by using a program instruction, combined with a control system which executes an instruction. To automate a process, in need of energy, either to move the process itself as well as to operate the program and control system.  


                                                                  Vent2pln                                            
                                                           

                                                                    


                                                                        X  .  I     


                                                                  process control  


Control refers to the process control system that oversees some industrial processes so that a uniform and correct output can be maintained. Process control can do this by monitoring and adjusting the control parameters (such as temperature and flow rate) to ensure product output remains as it should be.
Examples of process control is closed loop system that maintains a predetermined temperature of the electric oven 


 
                               

In this case, the actuator is a heating element, controlled variable is the temperature, and the sensor is a thermo couple (a device that converts temperature into voltage). The controller controls the power to the heating element such that maintaining the temperature (as reported by a thermo couple) at the value set by reference.
Process control are classified as:

     continuous process
     batch process

Continuous processes in the flow of materials or products that continually, while the batch process has a beginning and the end point (which is usually done repeatedly).  



                                                                        X  .  II 

                                                         Sequential control system  


Sequentially controlled system [sequentially controlled system] control process that is defined as a set of functions that must be implemented in other words, a series of operations, one by one. Each operation in the row implemented, either for a given period, in this case called driven-time [time-driven], or until the task is complete (as indicated by, for example, a switch divider [limit switch]), in this case called event-driven [event-driven]. Row
driven-time is an open loop since no feedback, while event-driven tasks that are close loop for feedback signal is required to establish when the task is completed. 


 
                                 

Examples of the system being controlled sequence is fully automatic washing machine.
The first step in the washing cycle is filling the washing tube. It is a task-driven event because the water is allowed to enter up to achieve true high-surface. The next two tasks, rinse [wash] and turn-dry [spin-drain], each carried out over a certain period and the steps that are driven time. 



                                                                    X  .  III  

                                                                motion control  

 Electromechanical motion control system is an open loop and closed loop control in which objects undergo displacement. Such systems typically include motors, mechanical parts are moving, and (in many cases) sensors feedback.

Various motion control:
a. Servo-mechanism [servomechanism]
Servo-mechanism [servomechanism] is the term traditionally used to describe electro mechanical control system closed-loop directing a careful displacement of a physical object such as a radar antenna or a robotic arm. Typically, could-be-controlled output position or velocity output (or both). An example of a servo-mechanism is positioning systems for radar antenna, as shown in Figure 


 
                                        

b. Numerical control [Numerical Control or NC]These machines can automatically cut and form-work objects without a human operator. Each engine has a set of axes [axis] and its own parameters that must be controlled; as an example, consider forging machine shown in Fig. object-work [work piece] that is being formed is attached to the table to move. The table can be moved (using electric motors) in three directions: X, Y, and Z. The rate-cutting tools also automatically controlled. To make a piece, the table moving objects passing through the gear-cutting work [cuttingtool] on the speed and depth of cuts that have been set. In this example, four parameters (X, Y, Z, and rpm) continuously and independently controlled by the controller. As an input controller receives a series of numbers which are more fully described how the part should be made. These numbers include measures of physical and details such as rate cuts and the pace of bribes [feed]. 

 
                                       

c. Robo 

  
                                                       

Robo ( Ringing on Boat ) industry is a classic example of a position control system. In most cases, the robo has a single arm with joints of the shoulder, elbow, and wrist, as well as a kind of hand called the end effector

  
                                              

six-axis industrial robots are controlled independently-known as having six degrees of freedom [degree of freedom] 



                                                                        X  .  IIII  

                                                        Infra Red 

 

Infra red (infra red) light is electromagnetic wavelengths than visible light is between 700 nm and 1 mm. Infrared ray is light that is not visible. When viewed with the spectroscope light then radiation of infrared light will be visible on the electromagnetic spectrum with wavelengths over the wavelength of red light. With these wavelengths, the infrared light will not be visible to the eye but the resulting heat radiation still feels / detected. Infrared can be divided into three regions namely:
* Near Infra Red .................. 0.75 - 1.5 μm* Mid Infra Red .. ............... ... 1:50 - 10 μm* Far Infrared .................. .10 - 100 μm [wikipedia]Direct sunlight contained 93 lumens per watt radiant flux including infrared (47%), visible light (46%), and ultra violet light (6%).Infrared rays contained in the light of the fire, sunlight, radiator reflection vehicle or exposed to heat asphalt road. Nerves in our skin can senses a difference in skin surface temperature, but we can not feel the infrared rays.Even infrared light is used to heat the food. For example in the fast-food restaurant.How can we utilize the principle of infrared to see the object?We utilize infra red detector each object emitted and infra red will reflect or absorb infra-red so the detector captures the different wavelengths emitted by things appropriate temperature."Since the main source of infra-red radiation is thermal radiation or heat, every object has a particular hot temperatures even what we think is not hot enough to radiate visible light can emit energy in the infrared and visibleThe more heat something more can he radiate infrared radiation. "[NASA]This is the basis of human body temperature detection and detection sensors to identify people who fell turquoise bird flu or swine flu at international airports.Many objects absorb infra-red radiation but some are reflecting particularly near infrared rays, near infrared rays is not related to the temperature of the object unless the object is very hot temperature.Infrared films (infrared detector) on the camera can see objects aided by sunlight and other light sources that ouput infra red rays from him then reflected and absorbed by the object. We can get the color of the object with the help of reflected and absorbed infrared object, the color of the object is a combination of red color blue, green (RGB) and infra red.Infra red can be used also as a wave carier that can extend the distance limit wave reception, but the transmitted wave to be line of sight (LOS) or straight-infrared can not turn if the radius of vertical transmit  light barrier by an object even if it is transparent. This theory we apply the digital wave modulation on the remote tv .Mobile is now integrated with infrared and blue tooth devices to communicate with a pc.Examples of its application, namely the delivery of mobile applications pc or vice versa, takes note of the telephone number pc very much that it can not be stored in the phone memory is usually used for broadcasting sms.What is the difference infrared light with blue tooth?First, using infrared light to emit a signal, such as TV remote, while blue tooth uses radio frequency (RF) (2.4 GHz) to broadcasts its signal.second, infra red can not penetrate objects that prevented him from reaching the receiver or need reflection, because of its light .However Bluetooth can penetrate objects such as walls so far do not have a high skin depth.  

 

                                 

 

                                                       X  .   IIIII      

                     Electromagnetic control components and the insight  



In the type of electrical control panel is divided into two categories: conventional circuits and digital circuits, conventional circuits using a relay, digital timer counter while using PLC, micro controller to process.

On the control panel component there are two categories of components, namely components of control and power components. Component control functions move the power components, power components drive the load function.
Examples of control components, namely switches, push button, relay, fuse, timer, etc. while the power components, namely: contactor , MCCB , motorcycles, etc.

Components of Control is often used:
Switch

image   The switch has a contact ON Contact OFF, the switch has a mechanical made always in position and can be changed when in motion
Symbol:   


clip_image002   


Button  


image Button is divided into two: the key normaly Open (NO) and normaly Close button (NC), which distinguishes buttons and switches is the button after the emphasis will return to the starting position as there are per in mechanical
Symbol:  

      NC          NO
                                   clip_image002[9]   clip_image002[5]   


rotary switch
image
Rotary switch (Selector switch) is a sugar that can change position by rotating the position, rotary switch can have 2 to over 8 positions
·
Symbol

clip_image002[11]     image       



Emergency Stop
image
Emergency Stop is a type of switch that, when in the press will be locked and to remove it to be in the play, called the emergency stop to allow users to know the function of this switch is to shut down the system in an emergency
Symbol:

clip_image002[13]    image    




indicator lights
image
Indicator lights normally used for indication of phase R, S, T and alarm, too often for the indication of the running process
Symbol:  

clip_image002[15]  image    



relay
image
Relay is because the magnetic switch for driving the relay contacts must provide a voltage to the coil resulting in an iron rod in coil turns into a magnet attracting the contact lever
Symbol:
     contact                        coil  


      clip_image002[19]                  clip_image002[17]            

image      





timer
image
On Timer electronic circuit there is delay turning on the relay coil, the relay there are two functions: On delay and delay timer Off, On delay time will count when the supply is On while Off delay time will count when the supply timer off
Symbol:
ODT                         coil                          OFT  

                           
clip_image002[25]               clip_image002[21]                  clip_image002[29]  


image    




Electromagnetic control components and the insight
In the type of electrical control panel is divided into two categories:
conventional circuits and digital circuits, conventional circuits
using a relay, digital timer counter while using
P L C , micro controller to process.  

 Some information about the elements of the automatic control system:
 
Process (Process) is the order of the equipment that has a specific function. Input process can vary, which certainly is a quantity that is manipulated by the final control element or control valve so that the variable is equal to the set point.
Input is also described manipulated variables.Manipulated variables is the input of a process that can be manipulated or altered magnitude that process variable or variables that are controlled equal to the set point.
Disruption is the amount other than the manipulated variable, which can cause changes in the controlled variable. This quantity is commonly called load.
The gauge element is the very tip of a measurement system (measuring system). Examples of the measuring element that is widely used for example termocouple or oriface plate. This section also commonly called a sensor or the primary element.
Transmitter is a device used to read the signal sensing element, and convert it into signals that can be understood by the controller.
Transducer is a signal switcher unit. Said transmitter, often confused with the word transducer. Both do have a function similar, although not equally true. Transducer is more general in nature, while the transmitter more specifically on the use in the measurement system.
The variables in question or measured variable is the signal coming out of the transmitter. This measurement is a reflection of the magnitude of the signal measurement system.
Set Point is great desired process variable. A control will always try to equalize the variable that is controlled by the set point.
Error is the difference between the set point dikurangivariabel question. Error can be negative, it could be positive. Conversely, if the set point is smaller than the variable in question, the error becomes negative.
Controllers are the elements that make up to three of the four stages of control measures which compares the set point with a measurement variable, calculates how much correction needs to be done, and issued a correction signal in accordance with the results of our calculations. Controller completely replace the role of the user in control of a process. The controller is a control device.
Control Unit is part of the controller that calculates the amount of correction needed. Input control unit is an error, and the output is a signal coming out of the controller (manipulated variable).
Unit controller has a transfer function that depends on the type of controller. Output control unit is the result of the completion of the transfer function by entering a mathematical error value as input.
Final control element, such as the name suggests, is the final part of the instrumentation control system. This section serves to change the measurement variable by manipulating the amount of manipulated variable, based on the command controller.  


Hasil gambar untuk komponen sistem kendali 


error detector = X = PID = PITa 

 


Hasil gambar untuk komponen sistem kendali 


                                                   X  .  IIIIII  

CONCEPT OF CONTROL SYSTEM, CONTROL SYSTEM OPEN and CLOSED AND EXAMPLES OF APPLICATION  


Definition Control Systems
In everyday life, consciously or unconsciously we continue to meet with a device or equipment that works controlled automatically either controlled in part or completely, such as when driving a car, when using the washing machine, using mobile phones, and many others, in a nutshell the system used to create a device be controlled in accordance with the desire of man is usually referred to as a control system (control system). Control system not only man-made control system, but also a lot of control that occurs naturally from the smallest element of the human body to the complexity of the universe.
How important is the human need ?, control system without control system, is likely to be found cars and airplanes, the flight into space? Satellite communication? Smartphone? And there are many things that are questionable. So it is understandable how important and how significant the presence of science in the development of control systems of human life.
Control system: What they are? What system control of it? 1. The system definition is an arrangement, set, or a set of things that are connected or related in such a way so as to form something as a whole, the definition of 2. The system is the physical arrangement of the components are connected or linked so that an entire unit or to act as a single unit. While the control or the control word is usually interpreted, directing, or command. The second meaning of the word and control system / control, the control system is an arrangement of the physical components that are connected or related in such a way so that it can govern, direct, or regulate itself or another system [[1]. In the world of engineering and science control system tends intended for dynamic control system.
Control system consists of sub-systems and processes (or plants) are arranged to receive the output (output) and the desired performance of a given input [2]. Figure 1 below to strength  block diagram for the simplest control system, the control system makes the system with a given input produces the expected output.


                               1 


For example, suppose the use of an elevator (lift), when the button showing the destination floor number is pressed, the elevator will move up / down to the floor of the goal. Button is pressed numbered destination floor is input that indicates the output that we want. This system is a step function shown in the figure, the performance of the elevators can be seen from the elevator response curve

                                       2
                                                                  Elevator respons 

Two main scalable performance that can be seen is, first, transient response, second, steady-state error. In the example of this elevator, the convenience and the time needed to arrive at the destination users rely on transient response. If the response is too fast, passenger comfort is sacrificed, if it is too slow, the time required is also greater. Steady-state error is also a very important performance indicators for passenger safety and comfort will be sacrificed if the output is not as desired.

    
Classification System Control / Control
In general, the control system can be classified as follows:

    
Manual and Automatic Control System
    
Rim Systems Open (Open Loop) and the Rim Closed (Closed Loop)
    
Continuous and Discrete Control System
    
According to the driving source: Electrical, Mechanical, Pneumatic and Hydraulic
A brief explanation of the types of control systems above will be discussed below.
Manual Control System is a control carried out by humans who acts as the operator, while the Automatic Control System is performed by controlling the equipment that works automatically and operating under the supervision of a human. Manual control systems are found in everyday life such as the setting of the radio, television, television layer of light, water flow through the tap settings, controlling the speed of the vehicle, and others. While the Automatic Control Systems commonly found in industrial processes (both chemical process industry and automotive processes), air control, power generation and others.
Rim Open Control System (Open Loop) is a control system in which the amount of output does not give effect to the amount of input, so that the controlled variable can not be compared to the desired price. While the Control System Closed Rim (Closed Loop) is a control system in which the amount of output an effect on the amount of input, so that the amount of controlled can be compared against the desired price. Furthermore, the price difference that occurs between the amount of which is controlled by the desired price is used as a correction which is the target of control. 



Open Control System (Open Loop) and Control Systems Closed (Close Loop)
     Open control system (Open Loop)

As was mentioned above that the open-loop control system is a system whose output has no effect on the control action. That is, the open control system output can not be used as a feedback in the insert



                                         3 

Open Loop Control System
In an open control system, the output can not be compared with the input reference. Thus, for each input reference relates to a specific operation, as a result of the provision depends on the calibration system. With the disruption, open control system can not perform the appropriate tasks expected. Open control system can be used only if the relationship between inputs and outputs are known and there are no internal or external interference.
Feature - Feature Open Loop Control System:

    
Simple
    
The price is cheap
    
Can be trusted
    
Less accurate because there are no corrections to errors
    
based time
Open Loop System Application Examples:

    
Time-based traffic controller
    
Washing machine
    
electric oven
    
Escalator
    
Rolling detector at airports



    
Closed Control System (Close Loop)
Closed-loop control system is a control system output signal has a direct effect on the control action. closed loop control system is also a control system baited behind. Driving error signal, which represents the difference between the input signal and the feedback signal (which can be a function of the output signal or output signal or its derivatives). Fed to the controller to minimize errors and to make the system output near desired values. In other words, the term "closed-loop" means using feedback action to minimize the system error. 



                                             4
                                                                     Closed loop controler

The image above shows the relationship input and output of the closed loop control system. If in this case the man worked as an operator, then these people will keep the system at the desired state, when there is a change in the human system will perform the initial steps of setting so the system back to work in the desired state.
Here are the components of control systems covered:

    
Input (input), the stimulus given to the control system, a desired price for the controlled variable for controlling. This price does not depend on the system output
    
Output (output, response), is a response to the control system, the price will be maintained for the controlled variable, and the price indicated by the recording device
    
Load / Plant, a physical system to be controlled (eg mechanical, electrical, hydraulic or pneumatic).
    
Control device / controller, the equipment / circuit to control the load (the system). This tool can be combined with the amplifier
    
Feedback element, show / returns the detector to the paint of the results that can be compared against the desired price (in sets)
    
Error Detector (error detection tool), an error detection tool that shows the difference between the input (input) and response through feedback (feedback path)
    
Disturbance signals an unwelcome addition. These disorders tend to result in output prices different from the prices at input , this disorder is usually caused by changes in system load, for example a change in environmental conditions, vibration or otherwise.
Examples of closed control system applications:

    
Servo mechanisme
    
Process control system
    
Refrigerator
    
Automatic Water Heater
    
Thermostatic control
    
air conditioning  



example control system  :


   Gambar terkait 


Hasil gambar untuk sample application control system   

Gambar terkait

Hasil gambar untuk sample application control system

 Gambar terkait

Hasil gambar untuk sample application control system 

Hasil gambar untuk sample application control system

Hasil gambar untuk sample application control system

                  Hasil gambar untuk sample application control system 

                  Gambar terkait

Jumat, 16 Desember 2016

transmission components in various fields in each discipline on earth AMNIMARJESLOW AL DO FOUR DO AL ONE LJBUSAF thankyume



                                 Hasil gambar untuk Transmission on earth
                                                                      X  .  I 
                                        electronic transmission components discipline 


                             Gambar terkaitHasil gambar untuk theory transmission in building

Transmission line loudspeaker  



  Exploded-view diagram showing the IMF Reference Standard Professional Monitor loudspeaker by renowned transmission line speaker pioneer John Wright (of IMF/TDL), from the 1970s. The complex shape of the transmission line allowed a full frequency range of 17 Hz to "beyond audibility" and sensitivity of 80 dB (specified as 96 dB at 1 metre for 40 watts with pink noise). The inset photograph shows the assembled loudspeaker.

A transmission line loudspeaker is a loudspeaker enclosure design (topology) that uses an acoustic transmission line within the cabinet, compared to the simpler enclosures used by sealed (closed) or ported (bass reflex) designs. Instead of reverberating in a fairly simple damped enclosure, sound from the back of the bass speaker is directed into a long (generally folded) damped pathway within the speaker enclosure, which allows far greater control and use of speaker energy, and the resulting sound.
Inside a transmission line (TL) loudspeaker, is a (usually folded) pathway into which the sound is directed. The pathway is often covered with varying types and depths of absorbent material, and it may vary in size or taper, and may be open or closed at its far end. Used correctly, such a design ensures that undesired resonances and energies, which would otherwise cause undesirable auditory effects, are instead selectively absorbed or reduced ("damped") due to the effects of the duct, or alternatively only emerge from the open end in phase with the sound radiated from the front of the driver, enhancing the output level ("sensitivity") at low frequencies. The transmission line acts as an acoustic waveguide, and the padding both reduces reflection and resonance, and also slows the speed of sound within the cabinet to allow for better tuning.
Transmission line loudspeakers designs are more complex to implement, making mass production difficult, but their advantages have led to acclaim for a number of manufacturers such as IMF, TDL, PMC, KVART & BØLGE  and the like. As a rule, transmission line speakers tend to have exceptionally high fidelity low frequency response far below that of a typical speaker or subwoofer, reaching into the infrasonic range (British company TDL's studio monitor range from the 1990s quoted their frequency responses as starting from as low as 17 Hz depending upon model with a sensitivity of 87 dB for 1 W @ 1 metre), without the need for a separate enclosure or driver.  Acoustically, TL speakers roll off more slowly (less steeply) at low frequencies, and they are thought to provide better driver control than standard reflex cabinet designs, are less sensitive to positioning, and tend to create a very spacious soundstage. Modern TL speakers were described in a 2000 review as "match[ing] reflex cabinet designs in every respect, but with an extra octave of bass, lower LF distortion and a frequency balance which is more independent of listening level".
Although more complex to design and tune, and not as easy to analyze and calculate as other designs, the transmission line design is valued by several smaller manufacturers, as it avoids many of the major disadvantages of other loudspeaker designs. In particular, the basic parameters and equations describing sealed and reflex designs are fairly well understood, the range of options involved in a transmission line design mean that the general design can be somewhat calculated but final transmission line tuning requires considerable attention and is less easy to automate.

Purpose and design overview

Low frequencies, which remain in phase, emerge from the vent which essentially acts as a second driver. The advantage of this approach is that the air pressure loading the main driver is maintained which controls the driver over a wide frequency range and reduces distortion. [The TL design] also produces higher SPL [sensitivity or loudness] and lower bass extension than ported or sealed box of similar size.
- PMC, TL speaker design company
I have an intuitive abhorrence of resonance enhancement to give a loudspeaker more "kick" or apparent bass as they can sound "single-noted". Yes you can pick out the bass rhythm but what about the melody. What a transmission line gives in my experience is a much smoother and more realistic bass quality.
- Steve Davey, former TNT Audio staff member/reviewer
A transmission line is used in loudspeaker design to reduce time, phase, and resonance related distortions, and in many designs to gain exceptional bass extension to the lower end of human hearing, and in some cases the near-infrasonic (below 20 Hz). TDL's 1980s reference speaker range (now discontinued) contained models with frequency ranges of 20 Hz upwards, down to 17 Hz upwards, without needing a separate subwoofer. Irving M. Fried, an advocate of TL design, stated that:
"I believe that speakers should preserve the integrity of the signal waveform and the Audio Perfectionist Journal has presented a great deal of information about the importance of time domain performance in loudspeakers. I’m not the only one who appreciates time- and phase-accurate speakers but I have been virtually the only advocate to speak out in print in recent years. There’s a reason for that.
It is difficult and costly to design and manufacture a time- and phase-accurate speaker system. Few of today’s high-end loudspeakers are time- and phase-accurate designs. The audio magazines need to appeal to a broad spectrum of advertisers including many who make speaker systems which are time incoherent. The magazines, and the reviewers who write for them, have ignored or downplayed the issue of time- and phase-accuracy in order to maximize advertising revenue. I am not alone in recognizing this situation." 
The transmission line (TL) is the theoretical ideal, and one of the most complex constructions, with which to load a moving coil drive unit. The most common and practical implementation is to fit a drive unit to the end of a long duct that is usually open at the far end. In practice, the duct is folded inside a conventional shaped cabinet, so that the open end of the duct appears as a vent on the speaker cabinet. There are many ways in which the duct can be folded and the line is often tapered in crossection to avoid parallel internal surfaces that encourage standing waves. Some speaker designs also use a spiral or elliptic spiral shaped duct, usually with one speaker element in the front or two speaker elements arranged one on each side of the cabinet. Depending upon the drive unit, and quantity and various physical properties of absorbent material, the amount of taper will be adjusted during the design process to tune the duct to remove irregularities in its response. The internal partitioning provides substantial bracing for the entire structure, reducing cabinet flexing and colouration. The inside faces of the duct or line, are treated with an absorbent material to provide the correct termination with frequency to load the drive unit as a TL. The enclosure behaves like an infinite baffle, potentially absorbing most or all of the speaker unit's rear energies. A theoretically perfect TL would absorb all frequencies entering the line from the rear of the drive unit but remains theoretical, as it would have to be infinitely long. The physical constraints of the real world, demand that the length of the line must often be less than 4 meters before the cabinet becomes too large for any practical applications, so not all the rear energy can be absorbed by the line. In a realized TL, only the upper bass is TL loaded in the true sense of the term (i.e. fully absorbed); the low bass is allowed to freely radiate from the vent in the cabinet. The line therefore effectively works as a low pass filter, another crossover point in fact, achieved acoustically by the line and its absorbent filling. Below this “crossover point” the low bass is loaded by the column of air formed by the length of the line. The length is specified to reverse the phase of the rear output of the drive unit as it exits the vent. This energy combines with the output of the bass unit, extending its response and effectively creating a second driver.
Essentially, the goal of the transmission line is to minimize acoustical or mechanical impedance at frequencies corresponding to the driver's fundamental free air resonance. This simultaneously reduces stored energy in the driver's motion, reduces distortion, and critically damps the driver by maximizing acoustic output (maximal acoustical loading or coupling) at the terminus. This also minimizes the negative effects of acoustic energy that would otherwise (as with a sealed enclosure) be reflected back to the driver in a sealed cavity.
Transmission line loudspeakers employ this tube-like resonant cavity, with the length set between 1/6 and 1/2 the wavelength of the fundamental resonant frequency of the loudspeaker driver being used. The cross-sectional area of the tube is typically comparable to the cross-sectional area of the driver's radiating surface area. This cross section is typically tapered down to approximately 1/4 of the starting area at the terminus or open end of the line. While not all lines use a taper, the standard classical transmission line employs a taper from 1/3 to 1/4 area (ratio of terminus area to starting area directly behind driver). This taper serves to dampen the buildup of standing waves within the line, which can create sharp nulls in response at the terminus output at even multiples of the driver's Fs.
In a transmission line speaker, the transmission line itself can be open ("vented") or closed at the far end. Closed designs typically have negligible acoustic output from the enclosure except from the driver, while open ended designs exploit the low-pass filter effect of the line, and the resultant low bass energy emerges to reinforce the output from the driver at low frequencies. Well designed transmission line enclosures have smooth impedance curves, possibly from a lack of frequency-specific resonances, but can also have low efficiency if poorly designed.
One key advantage of transmission lines is their ability to conduct the back wave behind the transducer more effectively away from it – reducing the chance for reflected energy permeating back through the diaphragm out of phase with the primary signal. Not all transmission lines designs do this effectively. Most offset transmission line speakers place a reflective wall fairly close behind the transducer within the enclosure – posing a problem for internal reflections emanating back through the transducer diaphragm. Older descriptions explained the design in terms of "impedance mismatch", or pressure waves "reflected" back into the enclosure; these descriptions are now considered outdated and inaccurate as technically the transmission line works through selective production of standing waves and constructive and destructive interference (see below).
A second benefit is that the resulting music is time coherent (i.e., in phase). Fried quoted in 2002, a listening test performed and reported in December 2000's Hi-Fi News (as he believed) in which a high-quality recording was obtained using reputable but non-time-coherent loudspeakers and this recording was then time phase corrected; an expert listening panel "voted unanimously for the superior realism and accuracy of the time corrected output" for high quality sound reproduction.
A transmission line speaker employs essentially, two distinct forms of bass loading, which historically and confusingly have been amalgamated in the TL description. Separating the upper and lower bass analysis reveals why such designs have so many potential advantages over reflex and infinite baffle designs. The upper bass is completely absorbed by the line allowing a clean and neutral response. The lower bass is extended effortlessly and distortion is lowered by the line’s control over the drive unit’s excursion. One of the exclusive benefits of a TL design is its ability to produce very low frequencies even at low monitoring levels – TL speakers can routinely produce full range sound usually requiring a subwoofer, and do so to very high levels of accuracy. The main disadvantage of the design is that it is more labor-intensive to create and tune a high quality and consistent transmission line, compared to building a simple enclosure. A 2010 Hifi Avenue TL speaker review commented that "One thing I have noticed about transmission line designs is that they create a rather big soundstage and seem to handle crescendoes with ease". 


History of transmission line loudspeakers

Invention and early use

This image is actually an inverted folded horn. You can tell as the throat is larger than near the port opening. A true Transmission Line enclosure is the same width 'vent' throughout. .
The concept was innovated within acoustic enclosure design, and originally termed an "acoustical labyrinth", by acoustic engineer and later Director of Research Benjamin Olney, who developed the concept at the Stromberg-Carlson Telephone Co. in the early 1930s while studying the effect of enclosure shape and size on speaker output, including the effect of "extreme length in a box baffle". A patent was filed in 1934. The design was used in their console radios beginning in 1936. A loudspeaker enclosure based on the concept was proposed in October 1965 by Dr A.R. Bailey and A.H. Radford in Wireless World (p483-486) magazine. The article postulated that energy from the rear of a driver unit could be essentially absorbed, without damping the cone's motion or superimposing internal reflections and resonance, so Bailey and Radford reasoned that the rear wave could be channeled down a long pipe. If the acoustic energy was absorbed, it would not be available to excite resonances. A pipe of sufficient length could be tapered, and stuffed so that the energy loss was almost complete, minimizing output from the open end. No broad consensus on the ideal taper (expanding, uniform cross-section, or contracting) has been established.

"Classic" era transmission line loudspeakers

Source for much of this section: Loudspeakers: for music recording and reproduction (Newell & Holland, 2007) 
The birth of the modern transmission line speaker design came about in 1965 with the publication of A R Bailey’s article in Wireless World, “A Non-resonant Loudspeaker Enclosure Design”, detailing a working Transmission Line. Radford Audio took up this innovative design and briefly manufactured the first commercial Transmission Line loudspeaker. Although acknowledged as the father of the Transmission Line, Bailey’s work drew on the work on labyrinth design, dating back as early as the 1930s. His design, however, differed significantly in the way in which he filled the cabinet with absorbent materials. Bailey hit upon the idea of absorbing all the energy generated by the bass unit inside the cabinet, providing an inert platform for the drive unit to work from; unchecked, this energy produces spurious resonances in the cabinet and its structure, adding distortion to the original signal.
Shortly thereafter the design entered mainstream Hi-Fi, through the works of Irving M. "Bud" Fried in the United States, and a British trio: John Hayes, John Wright, and David Brown. Dave D'Lugos describes the period that followed (approx. 35 years until the start of the 21st Century) as a period when the "classical designs" were created.
Fried was exposed during his time at Harvard University to high fidelity audio reproduction, and later became an importer of audiophile items. Under the trademark "IMF" (his initials), from 1961, he eventually became involved with many advancements in audiophile equipment: cartridges (IMF – London, IMF – Goldring), tone arms (SME, Gould, Audio and Design), amplifiers (Quad, Custom Series), loudspeakers (Lowther, Quad, Celestion, Bowers and Wilkins, Barker, etc.). In 1968 he met John Hayes and John Wright, who had already designed an award winning tone arm in the UK and had brought along a transmission line speaker designed by John Wright - described by Hayes as "fanatical regarding quality" - in order to promote and demonstrate the tone arm at a New York hifi show. Irving unexpectedly received a number of orders for the unnamed speaker, which he dubbed the "IMF". The British pair, along with Hayes' colleague David Brown, agreed to form a UK company to design and manufacture speakers which would be sold by Irving in the United States. John Hayes later wrote that:
Of course, Bud, had called it the IMF, and therefore, perhaps mistakenly we registered IMF and formed an IMF company... At no time did Bud Fried have any input on the designs. We sold him speakers and he was the US Distributor...  [...] Bud Fried was never a Director or shareholder of IMF Electronics. IMF electronics were the only company manufacturing the transmission line speakers. The name IMF was adopted because Bud Fried had demonstrated the first prototype speakers at the New York hi fi show, and because of the publicity and the fact that he had used his name on the then unnamed speakers, we stuck with the name which was a mistake on our part. It was never his company. After our lawsuit he called his speakers Fried.
The relationship broke down acrimoniously when Irving began to make his own, poorer quality speakers, also marketed as "IMF", and refused to cease until a court agreed that the UK business had the right to the trademark IMF for loudspeakers. Following the split, Irving in the USA (under the brandname "Fried") and the three founders of IMF Electronics in the UK (via a joint venture with driver manufacturer Elac under the name TDL), both became well known in audiophile circles for many years as major advocates of transmission line speaker design. TDL closed after John Wright's gradual failing of health and death in 1999 from cancer. He was described in his 1999 obituary as "one of the most important figures on the British hi-fi scene since the mid-1960s... best remembered for his transmission-line loudspeaker designs". The brand was acquired by Audio Partnerships (part of retailer group Richer Sounds). Freid died six years later, in 2005.

21st century

In the early 21st century, mathematical models that seemed to approximate the behavior of real-world TL speakers and cabinets, began to emerge. According to the website t-linespeakers.org, this led to an understanding that what he termed the "classical" speakers, designed largely by "trial and error", were a "good job" and the best that was reasonably possible at those time, but that better designs were now achievable based on modeled responses. 


Design principles

Fig. 1 - Relationship between TL length and wavelength
Fig. 2 - Frequency response (magnitude) measurement of Drive unit & TL outputs
Phase inversion is achieved by selecting a length of line that is equal to the quarter wavelength of the target lowest frequency. The effect is illustrated in Fig. 1, which shows a hard boundary at one end (the speaker) and the open-ended line vent at the other. The phase relationship between the bass driver and vent is in phase in the pass band until the frequency approaches the quarter wavelength, when the relationship reaches 90 degrees as shown. However by this time the vent is producing most of the output (Fig. 2). Because the line is operating over several octaves with the drive unit, cone excursion is reduced, providing higher SPL’s and lower distortion levels, compared with reflex and infinite baffle designs.
The complex loading of the bass drive unit demands specific Thiele-Small driver parameters to realise the full benefits of a TL design. Most drive units in the marketplace are developed for the more common reflex and infinite baffle designs and are usually not suitable for TL loading. High efficiency bass drivers with extended low frequency ability, are usually designed to be extremely light and flexible, having very compliant suspensions. Whilst performing well in a reflex design, these characteristics do not match the demands of a TL design. The drive unit is effectively coupled to a long column of air which has mass. This lowers the resonant frequency of the drive unit, negating the need for a highly compliant device. Furthermore, the column of air provides greater force on the driver itself than a driver opening onto a large volume of air (in simple terms it provides more resistance to the driver's attempt to move it), so to control the movement of air requires an extremely rigid cone, to avoid deformation and consequent distortion.
The introduction of the absorption materials reduces the velocity of sound through the line, as discovered by Bailey in his original work. L Bradbury published his extensive tests to determine this effect in an AES Journal in 1976   his results agreed that heavily damped lines could reduce the velocity of sound by as much as 50%, although 35% is typical in medium damped lines. Bradbury’s tests were carried out using fibrous materials, typically longhaired wool and glass fibre. These kinds of materials however produce highly variable effects that are not consistently repeatable for production purposes. They are also liable to produce inconsistencies due to movement, climatic factors and effects over time. High specification acoustic foams, developed by manufacturers such as PMC, with similar characteristics to longhaired wool, provide repeatable results for consistent production. The density of the polymer, the diameter of the pores and the sculptured profiling are all specified to provide the correct absorption for each speaker model. Quantity and position of the foam is critical to engineer a low pass acoustic filter that provides adequate attenuation of the upper bass frequencies, whilst allowing an unimpeded path for the low bass frequencies.

Mathematical equations, modelling, and design process

The external links section of this article links to a number of resources that detail the mathematical principles, models, and DIY calculations, as well as extended practical design material, related to transmission line speakers.
For most of the 20th century, transmission line design remained more of an art than a science, requiring much trial and error. Jon Risch states in an article on classic transmission line design, that the hard part was finding the best stuffing density along the line's length, because "the line stuffing affects both the total apparent line length AND the total apparent box volume simultaneously". He summarized the state of design at the time as:
"The classic transmission line bass enclosure has never been completely and successfully modeled such that it can be built from a pat set of equations. Some claim to have done this, but it doesn't seem to allow a first time build without adjustments, so the models have enough wrong to require a fudge factor..." 
Dave D'Lugos, founder of fan site t-linespeakers.org, comments that this reflects the "classical" designs from the 1960s until Risch's writing, during which period "TL design was seat of the pants".
However from the 21st century, Martin King and George Augspurger (both separately and referencing each other's works), produced models which show these to be "generally less than optimal" designs which "did a good job of approaching what was possible in their day". Audio engineer Augspurger had modeled TL using an electrical analogy, and found it to agree closely with King's existing work, based on a mechanical analogy. D'Lugos concluded in his overview of TL modeling and design theory: "I think that using modern drivers & tools such as King's software you can build a better TL easier today".



Prominent individuals and companies

Pioneers:
  • Benjamin Olney - originated the idea of a duct in speaker enclosure design, which he termed an "acoustic labyrinth", while working for Stromberg-Carlson as an acoustic engineer and studying the effect of enclosure size on output sound.
  • Bailey and Radford - worked together and developed the concept for loudspeakers (1965). Their design was a significant development from the earlier work. Bailey's name was on the article and Radford built the first commercial TL speaker.
  • John Wright together with business partner John Hayes and (later) David Brown, and their company IMF Electronics Ltd (later: TDL) - Wright, a "fanatical" pursuer of quality, had designed an award winning tone arm and to demonstrate it, brought to New York a non-commercial TL speaker he had also designed. The speaker gained considerable attention and Wright, Hayes and colleage Brown formed a company that specialized in TL speakers, and won numerous awards (1968). TDL disbanded following Wright's death in 1999 and the brand - as a shell - was bought by Richer Sounds.
  • Irving M. "Bud" Fried - American audiophile and TL advocate, who encountered Wright and Hayes in 1968, recognized the potential of Wright's unnamed speaker, and began marketing their TL speakers in the United States. Later set up a TL company of his own to design speakers.
  • Martin King and George Augspurger - researchers and designers who succeeded in modeling realistic TL speaker designs in the early 21st century.


Hasil gambar untuk transmission electronics ltd speakers      
 Hasil gambar untuk transmission electronics ltd speakers 



                                                                      X  .  II
                                                        Otomotif  Transmission 

                         Hasil gambar untuk Transmission on earth


automatic transmission ismeaning automatic transmission is, the notion of automatic transmission

Here is a brief definition of the word automatic transmission in automotive or motor engine.Automatic Transmission: Automatic transmission Meaning. Transmission or gearbox or automatic gear shift. If the car or the usual conventional transmission, the clutch works by shifting gears and then back on the gas. This automatic transmission then do not use the clutch. The driver only needs to step on the gas (such as when riding a boom-boom car). In a certain speed gear will switch itself off and the vehicle will keep going faster in accordance with the driver's gas pedal.This transmission system is suitable for Urban Vehicle or car in a city full of traffic jams. Because the driver will obviously not be exhausted because of holding the clutch. Some cars use this type of transmission, for example, Hyundai Atoz or Mercedes Benz A-Class. But many drivers prefer a manual transmission because of the 'pull' strength is more pronounced. 



Automatic Transmission
This means that the automatic transmission. Transmission or gearbox or automatic gear shift. If the car or the usual conventional transmission, the clutch works by shifting gears and then back on the gas. This automatic transmission then do not use the clutch. The driver only needs to step on the gas (such as when riding a boom-boom car). In a certain speed gear will switch itself off and the vehicle will keep going faster conformed to the gas pedal of the driver. This transmission system is suitable for Urban Vehicle or car in a city full of traffic jams. Because the driver will obviously not be exhausted because of holding the clutch. Some cars use this type of transmission, for example, Hyundai Atoz or Mercedes Benz A-Class. But many drivers prefer a manual transmission because of the 'pull' strength is more pronounced
Automatic 4WDThis system moves with 2WD, until the system detects the need to use 4WD. Automatically power is divided into front and rear wheels in accordance with the ratio of field conditions. In general, the automatic system works when one of the tires slip. More modern, using software that can turn into a 4WD before wheel slip, by analyzing road conditions. 



 

Anti-lock Braking System is useful to prevent locking effect on the brake pedal when the car suddenly so avoid the possibility of slippage due to the effects of pushing force vehicles away from the center point (centrifuges). The trick is to sensors that provide input or control, when to stop and when the wheels must spin the wheel. So when vehicle brakes, the wheels are not locked and the driver remains in control of the vehicle. This technology was first introduced by Daimler when it was still just a duet with Benz in 1970. ABS originally given the name of anti-block system created by Hans Scherenberg diStuttgart, Germany


transmission
The transmission system 




Speed ​​shift lever (5 speed) at the Mazda Protege.Transmission system, in automotive, is a system that works for the conversion of torque and speed (revolutions) of the engine torque and speed be different to be forwarded to the final drives. This conversion changed the high rotational speed becomes lower but more powerful, or vice versa.Example 5-speed transmission at 4,400 engine rpmGir gir RPM ratio numbers onexit     shaft      transmission1        3,769      1,1672        2.049        2.1473        1.457      3.0204        1,000      4,4005        0.838       5.251The highest torque of an engine generally occurs around the middle of the permitted engine speed limit, while vehicles requiring the highest torque at the time began to move. In addition, vehicles running on roads that climb requires higher torque than a car that runs on a flat road. Vehicles that run at low speed requires higher torque than high speed. With the operating conditions vary, so it needed power transmission system so that needs can be met by the machine.


The manual transmission

Top and side view of a manual transmission that is placed on the floor of Ford with 4 speeds

The manual transmission is the type of transmission used in motor vehicles. This system uses a clutch operated by the driver to arrange the transfer of torque from the engine to the transmission, as well as the gear shift operated by hand (in the car) or legs (the motor). Gear acceleration assembled in the gear box / Reducer for some speed, typically ranging from 3 to 6 forward gear acceleration combined with one reverse gear (R). Gear acceleration is used depends on the speed of the vehicle at low speeds or uphill used gear acceleration 1 and so that the higher the speed, and vice versa if decelerate unloaded gear acceleration, braking can be assisted with a reduction gear acceleration.



        

Top and side view of a manual transmission that is placed on the floor of Ford with 4 speeds
synchromesh

Is a synchromesh transmission equipment which serves to equalize the rotation between the teeth to be connected so that the acceleration gear shifting can be done seamlessly. How it works when the transmission lever in neutral position, the synchromesh is in the middle does not affect or be affected by both the gear by his side.
Composition of gear acceleration
5-speed transmission lever in the Mazda Protege.

The arrangement / layout gear manual gearbox depending on the characteristics of commonly used sector in the region, Asia is somewhat different car output with Europe, especially in the placement of reverse gear (R). Placements are widely used transmission lever is on the floor but some modern cars use the transmission lever on the dashboard or old cars placed on the handlebars steering wheel


  5-speed transmission lever in the Mazda Protege.     



Transmission lever floor
pattern explanation
manual Layout.svg
It is a 5-speed gear arrangement commonly used in modern cars plus one reverse gear marked with R. Placement reverse gear (R) is crucial because it can enter an interference with the vehicle, because if the teeth 5 wrong move could prove fatal to retreat ,
Manual Layout.svg
manual Dogleg.svg
This arrangement is an arrangement of five-speed gear commonly used in lightweight bus plus one reverse gear marked with R. Dental 1 is rarely used, is used when climbing on steep climbs


Manual Dogleg.svg   

the gear lever on the steering wheel
The gear lever on the steering Saab96
pattern explanation
Manual Layout Layout 3.svg car with three forward gears which is an arrangement of gear acceleration output American cars of the 1930s until the 1950s that at the time dubbed "three on the three"
Column4MT.svg is a layout that was developed after that, which was also developed by the output of cars of Europe and Japan. Until it is still used in some commercial cars such as the Mitsubishi L 300.



Motorcycle gear lever
Suzuki SV650S acceleration gear lever.

Corak exchange motorcycle gear acceleration that are commonly used:

             6
          5
       4
     3
   2
N
1

Acceleration gear lever with his left foot stepped on to get into first gear and prying upwards to get into gear 2, 3, and so on. If you want to lower the speed, the acceleration gear lever stepped down from 5 to 4 to 3 and so on.

 

Advantages and BenefitsFuel consumption
The manual transmission (M / T) connecting the engine to the transmission with clutch-rigid compared with a torque converter in the automatic transmission (A / T) or v-belt in the continuously variable transmission (CVT). The manual transmission also does not waste energy because there is no hydraulic pump as the transmission of A / T. Therefore, the car with the transmission M / T is generally more efficient than the A / T or CVT; even so the difference in fuel consumption has been somewhat reduced due to the emergence of locking torque converter on the transmission of A / T.  The difference in fuel consumption between the M / T and A / T approximation  5-15% depending on the way of driving and road conditions. Next, the transmission M / T also does not require active cooling and for mechanical simpler than A / T, then the weight is lighter than the car with the transmission of A / T. Durability and maintenance feeendurance
Transmission M / T has a simpler mechanical system with parts less than A / T. Therefore, the treatment was generally easier and cheaper. In addition, the transmission M / T does not have any electrical components, pumps, and cooling mechanisms such as the transmission of A / T.The cost of care
The cost of vehicle maintenance manual are generally cheaper than the automatic. The new price of the vehicle manual also cheaper than the automatic.lubrication
Most transmission M / T depending on the splash lubrication despite some gearbox Rover also has an oil pump.Performance and Control
Transmission M / T is generally a greater number of gear ratios (gear ratio). Most vehicles have 5 to 6 speed manual gear, while transmitting A / T is usually only four teeth. Number of teeth which will further streamline the more fuel consumption.Braking engine (Engine Brake)Transmission A / T does not have an effective engine braking. This means that the machine is not effectively slows the car when the driver took off control speed. This causes the driver will use a lot of brakes, so the brake on the car A / T will wear faster.



 Gambar terkait  

Gambar terkait  
 Hasil gambar untuk transmisiones electronicas 

Hasil gambar untuk transmisiones electronicas    
automatic transmission

Pieces automatic transmission
Dental automatic planetary transmission.

The automatic transmission is the transmission to shift gears automatically accelerated. To change the rate of speed in the automatic transmission system is used the mechanism of friction and automatic transmission oil pressure. In the automatic transmission planetary gear serves to change the rate of speed and torque as well as on the gear manual transmission.

The tendency of people to use the automatic transmission has increased in recent years, particularly for luxury cars, and even certain types are already fully automatic transmission. the trend same was true on a motorcycle like Yamaha Mio, Honda Vario



  Pieces automatic transmission  


  Dental automatic planetary transmission


  Transmission DCT (Dual Clutch Transmission) Honda 

Gambar terkait 

Mode automatic transmissionTransmission DCT (Dual Clutch Transmission) Honda
The automatic transmission is controlled by simply moving the lever acceleration to a particular position. The position of the automatic transmission lever are sorted by the format of the P-R-N-D-3-2-L, as there are from left to right or from top to bottom. Machines can only be switched on in the position P or N only.
Generally, the automatic transmission mode is as follows:

    
P (Park) is a position for parking the vehicle, Transmission locked in this position so that the vehicle can not be driven.
    
R (Reverse) is a position to reverse the vehicle.
    
N (Neutral) is a neutral gear position, engine relationship with the wheels in the free state.
    
D (Drive) is a position to go forward under normal conditions.
    
2 / S (Second) is a position to move forward on mountainous terrain.
    
1 / L (Low) is an advanced position on the gear shift to one, only used when driving on extremely steep terrain.
While optional is:

    
3 is a position to go forward and the transmission will not switch on the top gear position.
    
O / D (Over Drive) is the position of the transmission gear so that the displacement occurs at higher engine speed.


Varian AT

    
4A / T is the transmission variant A / T that is often encountered in many mobil.Teknologi 4A / T is long enough to be present at Indonesia.Digunakan car era 70's until now. Cars that use this system include: Toyota Kijang LGX Krista 4AT and 4AT, Honda CR-V, Honda Fit / Honda Jazz, Toyota Crown, Toyota Camry, Toyota Corolla Altis, Toyota Corona, Honda Civic, dsb.4A / T using the format PRNDS / 2-L / 1 (without transmission D3 / 3 and without O / D).

    
5A / T. Not much different from the transmission 4A / T, only format that different.If format 4A / T is PRNDS / 2-L / 1, the 5A / T has PRND-format D3 (or) O / D-2-1.5A / T is used the car of the year 1990'an until now (rare car using 5A / T before the era of 90s they still wear 4A / T), among others: Suzuki Grand Vitara, Honda Brio, Honda Freed, Honda Fit / Honda Jazz, etc.
CVT automatic transmission on a motorcycle matic
CVT is the power transmission system from the engine to the rear tire using a belt connecting the drive pulley to the driven pulley. Automatic transmission is generally used in a scooter-type motorcycle (scooter), although it is starting to be applied also to the cub-type motorcycle. Automatic transmission is an automatic transmission used "V" Belt, known as the CVT (Continuous Variable Transmission). CVT no longer use the gears to set a transmission ratio, but uses a belt (V-Belt) and Vully to obtain variable gear ratio that varies. 


construction CVT 


The basic construction CVT pulleys based variable that the mechanical work consists of three main components:

    
Belts (V Belt) of rubber material
    
Primary pulley (drive pulley)
    
Secondary pulley (driven pulley)
Construction CVT pulley consists of fruit two variable positioned at a certain distance and both are connected by a belt (V Belt). Each pulley consists of two parts cone-shaped rear section attached to each other. Pulleys used in so-called CVT pulleys variable , where one of the pulleys can be moved closer or away from the other parts of the pulleys. This is due to both components of the pulleys are centrifugal with a spring mechanism that regulates the shift inverting each piece pulley continuously by the high and low spin machine. A V-shaped belt made of rubber material installed in the center pulleys to connect the two pulleys. Belt inner side is made of jagged, with the aim to improve the ability of the contact (grip) on the belt pulleys.
Primary pulley (drive pulley) to direct connected with a motorcycle engine and driven pulley (secondary pulley) is connected to the rear wheel via the intermediary drive mechanism in the form of centrifugal clutch and a reduction gear. Belts are used to connect the power play from the drive pulley to the driven pulley.How CVT works
When Round Stationary Engines
In the stationary rotation, centrifugal force that occurs in a string of shoe centrifugal clutch unit has not been able to beat the centrifugal spring tension. Shoes are not able to play the home friction clutch, so that the centrifugal clutch is not working. Engine torque which has been forwarded by stopping transmission on centrifugal clutch unit so as to wheel and motorcycles are not running.
When Round Raised Engineering / Motorcycles On the Road
When the engine rotation increases of approximately 3000 rpm, centrifugal force that occurs in the friction shoe is already quite large. Friction shoe will be thrown out and the house scraped clutch. In these vehicles centrifugal clutch begin forwarding to wheel rear engine torque so that the motorcycle starts. while the centrifugal force received a ballast roller on the drive pulley is not sufficient to overcome the spring tension on the driven pulley. This causes the driven pulley tightens (the output is a large diameter). Because the length of the belt fixed, then the drive pulley will adjust to be in a position to widen, (small diameter). Large transmission ratio so as to produce a comparison round lightweight and large torque.
When High Speed ​​Machine
At the time of the engine rev up to medium speed, centrifugal force received a ballast roller on the drive pulley is large enough, so that the roller was thrown out, pressing pulley sliding on the drive pulley to move towards narrowing and drive belt drive pulley diameter gets larger. The length of the belt so that the belt stays on the driven pulley to a position that is wider (smaller diameter). This situation makes the transmission ratio decreases so that the rate increases the speed of the motorcycle.
When Round-Speed ​​Machine
If the machine reaches high speed, the centrifugal force received a ballast roller on the drive pulley semangkin powerful that the outer roller thrown kesisi, strong semangkin pressing pulley sliding on the drive pulley to move towards narrowing and drive belt to the drive pulley diameter greatest. Pull the belt on the driven pulley will be even greater, pressing the driven pulley spring to shift the drive pulley to the widest position (smallest diameter). This situation makes the transmission ratio is getting smaller so that the rate is the higher the speed of the motorcycle.
When Motorcycles Carrying Heavy Load, accelerating or Streets Uphill
At the time of a motorcycle carrying a heavy load, or accelerate quickly when walking uphill, it takes a large torque so that the motorcycle can keep going. Conditions often encountered in this situation is the motorcycle was driving at low speeds, but this time it takes a large torque. Usually the driver will try to increase the torque produced by the engine by opening the valve wide open so that the engine turns up and produces great torque. In the CVT that works automatically by setting the engine rotation, this will be an obstacle. Normally, when the engine rotation is increased, then the transmission ratio will decline so this would be troublesome because the torque produced would be reduced. Therefore, to overcome this difficulty, the CVT is equipped with a device called a kick down mechanisme. Construction of the kick down mechanism located on the driven pulley, consisting of grooves made on a sliding pulli and nok / cam torque invested in fixed pulleys. At the time of the rear wheel gain custody street . 



Semi-automatic transmission
Ferrari F430 steering wheel incorporates acceleration gear shifting
Semi-automatic transmission is a transmission that acceleration without touching the gearshift / depress the clutch, the system uses electronic sensors, processors and actuators to move the gear acceleration on the orders of the driver. This system was developed to anticipate traffic congestion in urban areas. Semi-automatic transmission is also used in luxury sports cars such as used Porsche, Maserati, Ferrari is sometimes placed on the steering wheel to ease the switch gear acceleration.other applications
Motorcycle circulating in Indonesia in the early 1970s up to now generally use semi-automatic transmission that is simple, moped very popular at that time have only recently started to be produced and marketed motorcycle automatic transmission as used on Yamaha Mio, Honda Vario.Trade name semi automatic transmission



  Ferrari F430 steering wheel incorporates acceleration gear shifting 


Quickshift - Renault
     2-tronic - Peugeot
     Allshift, Twin Clutch SST - Mitsubishi
     C-Matic - Citroën (Citroën CX and Citroën GS)
     Easytronic - Opel
     Durashift EST - Ford
     Dualogic - Fiat
     MultiMode, SMT (Semi Manual Transmission) - Toyota
     I-SHIFT - Honda
     Senso Drive or EGS or BMP - Citroën
     Speed Gear - Fiat
     Selespeed - Alfa Romeo, Fiat
     Softouch - Smart
     Sportronic - Mitsubishi
     Duo Select - Maserati
     Automatic Stickshift - Volkswagen
     Sequentronic - Mercedes-Benz
     SMG / SSG - BMW
     S-Tronic - Audi
     DSG (Direct Shift Gearbox) - Seat, Škoda, Volkswagen
     DCT - Volkswagen, Bugatti, Koenigsegg
     PDK (Porsche Doppelkupplungen) - Porsche
     AMT (Automated Manual Transmission) - Proton   



Main component

     Clutch (clutch) or torque converter. Clutch is used for manual and semi-automatic transmissions and automatic transmission, the torque converter is used in the automatic transmission.
     Transmission, also known as the gears


 

Clutch / Torque converter


The clutch is a device used to connect two shafts at both ends for the purpose of transmitting mechanical power. Clutch normally does not allow the separation between the two shaft when operating, but at this time there is a clutch torque that is limited so that it can slip or disconnect when the torque limit is passed.
Coupling two rotating shafts

The main purpose of the clutch is to unite the two parts which can rotate. With the selection, installation, and maintenance is meticulous, clutch performance to the maximum, minimum power loss can be, and maintenance costs can be reduced




   Coupling two rotating shafts 


benefit
Clutch used in machinery for various purposes:

    
To connect two units shaft made separately, such as the motor shaft with a wheel or shaft generator to the engine. The clutch is able to separate and connect the two shafts to the needs of repair and replacement of components.
    
To obtain mechanical flexibility, especially on the two shafts that are not on one axis.
    
To reduce shock loads (shock load) from one shaft to another shaft.
    
To avoid excessive workload.
    
To reduce the vibration characteristics of the two rotating shafts.
Clutch typeRigid couplings
Rigid coupling is a coupling unit that brings together two types of shafts which does not allow a change in position of the second shaft or released, intentionally or unintentionally, when in operation. Rigid coupling is the right choice when second shaft want to be associated with the setting position is stable and precision. This clutch is a clutch with the highest service life for limitation of torque, RPM, and the weight of the shaft and the clutch is not exceeded .flexible couplingBeam couplings with threaded part helix Rzeppa joint and ...... Double Cardan Joint which is an example of a clutch CV


Coupling beam with its helical threaded part
Clutch gearOldham couplingsuniversal joint
Flexible coupling is used when there is little change in the second shaft axially position, radial, and angular when the engine is operating. Some types of flexible couplings, namely:

    
Beam
    
Clutch CV (constant-velocity)
    
diaphragm
    
disc coupling
    
Fluid coupling
    
Clutch gear (gear coupling)
    
Hirth joint
    
Oldham
    
Rag joint
    
universal joint  



Coupling beam, or it could be called a helical coupling, is delivering power coupling between the two shafts to allow the change of position of the shaft in angular, axial and parallel to a limited extent, when the shaft work. The design of the coupling beam is a clutch that has an empty section along the body of helical or spiral-shaped coupling, thus making it flexible. Coupling beam is usually made of aluminum alloy, stainless steel, and titanium.
Gear coupling is a clutch that transmits power between two shafts which are not in one line. The second shaft is connected to the third shaft in the clutch so-called spindle.
CV clutch is a clutch that allows for transmitting power at varying angles and at a constant rotational speed. Clutches of this type commonly used in automobile front wheel drive and all-wheel drive.
Universal joint is the type of coupling in the form of two rigid bars that allow the deflection of the direction of power transmission from the power source. Uniersal hinge joint consists of a pair of adjacent and connected to the cross shaft. Universal joint, though it transmits power which is not in line, but has a drawback, which can provide output RPM is not constant despite constant RPM input. It can cause vibration and wear on engine components.  




  Rzeppa joint and ... 

  , Double Cardan Joint which is an example of a clutch CV 


  Clutch gear 

   Oldham couplings 


  Universal joint




 Gearboxes / transmision

Bristol 171 Sycamore helicopter gears

Gear is the gear and hydraulic system that delivers mechanical power from the drive to the wheels with lower speed but higher turning force. This system also allows the change of speed-power ratio or the direction of rotation.

In the car, known as manual and automatic transmission. Manual means the rider to change gears with the help of the stalk. This system is cheaper, lighter, typically have better performance, and consume less fuel. Automatic transmission easier to use and are usually found in the car of US products. There was also a semi-automatic gearbox system, ie when replacement gear shaft is driven by a computer



  Bristol 171 Sycamore helicopter gears  
   


                                                                     X  .  III

                                                               building transmission 


                                                      Hasil gambar untuk building transmission
                                                      Hasil gambar untuk building transmission 


                                      Hasil gambar untuk corrugated iron buildings to withstand earthquakes 

                             Gambar terkait 
                         Hasil gambar untuk corrugated iron buildings to withstand earthquakes 

                           Hasil gambar untuk corrugated iron buildings to withstand earthquakes



                                                                 X  .  IIII 
                                                       transmission on a bike  / bicycles

                                         SystemGraphic550x335-blue   

Hasil gambar untuk automatic transmission on a bicycle Gambar terkait Gambar terkait   


                               



                        Automatic Bicycle  


       automatic bicycle  

Many of us think about motorized or electric powered bicycles when we hear the words automatic bicycle, but that is not what these bicycles are at all: An automatic bicycle is a bicycle with automatic transmission, that shifts gears automatically for the rider. With an automatic transmission, all of the gear guess-work and thinking is done for you, according to your speed and terrain.

The “Nuts and Bolts” of Automatic Bicycles

Automatic bikes are complex machines. The front hub of the bicycle is fitted with a gauge to determine wheel revolution. This information is sent to a computer chip housed near the pedals.
The computer chip controls the gears located on the rear tire hub and determines whether to shift up or down, depending on how many times the wheel revolves.
Throughout each bicycle ride, the sensors constantly search for the desired gear, or the gear which will allow the rider to maintain his or her preferred cadence.
Some bicycles with automatic transmission allow the rider to choose a preferred cadence by pressing up and down buttons. When a desired cadence has been chosen, the computer chip will constantly and automatically shift the bike’s gears to stay in that cadence, taking out all of the guesswork on the rider’s part.

Why Make an Automatic Bicycle?

Industry leaders who worked to develop the automatic transmission felt the biking industry fell into a slump after the 1980’s and 90’s when mountain biking and road racing became very popular.

Did you know...?

automatic bicycle
Did you know that bicycles with smartphone-controlled automatic transmissions have been developed?
Shimano, a leading bicycle manufacturer, unveiled a bicycle that could be controlled using an iPhone app. The app detects the rider's cadence using sophisticated wheel sensors and adjusts the gears accordingly by streaming data from the iPhone to the transmission system using Bluetooth technology.

Sales began to fall flat, so bicycle manufacturers began tapping new technologies, which could be applied to biking.
Surveys conducted by Shimano, one of the leading experts in the automatic bicycle industry, showed Americans felt bicycling was becoming too elitist.
Many non-expert bikers felt the sport was too difficult and complex to even attempt, and many riders didn't want to ride for fitness or competition, they just wanted to ride for fun.
This desire led to the bicycle with automatic transmission, so all of the complication and guesswork was taken out of biking, allowing the rider to take up biking again in a carefree, fun way.

Is the Automatic Bicycle For You?

Bicycle automatic shifting is not intended for everyone, nor is intended for all biking situations. They are not high-performance vehicles for road racing and for mountain biking. They shouldn't even be used in inclement weather.
An automatic bicycle transmission is best for people who want casual use out of his or her bicycle for social riding around town and riding just for fun.
If you loved biking as a kid, and you are interested in taking up biking again just for fun, bicycle with automatic transmission may be just the thing for you. This is also the case if you want to bike simply for the joy of cycling, and you're not interested in racing, competition or any type of extreme biking.
A bicycle with automatic transmission is a simple, fun way, to reenter the world of cycling if you have been away, or a great bike for leisure rides with the family or friends when you want a break from more competitive, hard-core cycling.

When I first learned to drive, I learned on a car with a manual transmission. It never seemed especially difficult because that was what I got used to. In fact, the first time I had to drive an automatic, I remember being very confused. What was I supposed to do with my left foot? Do I not have to shift at all? And if it’s automatic, then what’s with all these different choices on the gearshift lever? I quickly got the idea, of course, but still preferred the increased control and responsiveness I got from making my own decisions about when to shift. It would therefore seem that I should have the same attitude about bicycles, which not only require manual shifting but typically have many more than four or five gears. But manual bicycle transmissions have always given me trouble, and I’ve frequently wished I could have the convenience of an automatic transmission on a multi-speed bike.
Gearing Up for a Change
Sure enough, automatic bicycle transmissions have been in development for almost 30 years, though only recently have they become commercially available. Mechanically, the main thing needed for an automatic bike transmission is a motor or piston that moves the chain between gears in place of the standard lever-operated cable. This is a relatively straightforward engineering problem, but the difficult thing is working out how and when to tell the gears to shift. That computation currently requires the use of a tiny, battery-operated computer along with sensors that determine the current gear and the speeds at which wheels, pedals, and sprockets are moving. The computer constantly recalculates the optimal combination of front and rear gears to keep the rider at a consistent pedaling cadence, automatically signaling the gears to shift lower when going uphill or higher when going downhill. Using a controller on the handlebars, riders can, if they wish, adjust the gearing to provide a more intense workout or a gentler ride; they can also override the automatic shifting entirely and use it as a power-assisted manual transmission.
The first automatic bicycle transmission was designed by the Browning family, whose main claim to fame had been gun design. Now an independent company based near Seattle, Browning Components, Inc. focuses solely on bicycles and bike transmissions. Their most interesting innovation is a special gear with a hinged section (somewhat like a pizza slice) that swings in and out to guide the chain from one gear to the next. What’s great about the Browning mechanism is that the chain remains engaged in sprockets at all times, rather than simply dropping onto the next gear. This virtually eliminates the possibility of the chain slipping, and also makes it possible to shift smoothly and almost silently regardless of speed or load. Browning manufactures their own bikes (whose frames must be custom designed to accept the special transmission) and also supplies the transmission mechanism to other bike manufacturers.
Shifting More Than Gears
Shimano, the largest manufacturer of bicycle components such as brakes and shifters, has also begun selling automatic transmissions. One design uses a seven-speed, internally geared hub; another, which is not yet available in North America, uses a power-assisted derailleur system, but adds an automatic, powered suspension to adjust the comfort of the ride to fit current conditions. Bikes with the Shimano mechanism are significantly heavier and more expensive than their manual counterparts and are designed more for leisure riding than racing or mountain biking. The Browning mechanism, on the other hand, was first employed on bikes used for BMX racing, and adds somewhat less to the cost and weight of a bike.
Adding an automatic transmission to a bicycle seems—in the abstract at least—like a wonderful step forward in user interface. It replaces something awkward with something invisible, which is the way good technology should be. Whether or not the reality lives up to the hype (or will in the future), I don’t know. And something tells me it ought to be possible to create a purely mechanical automatic bike transmission. I’m not sure what happens to an electronic one when the batteries inevitably die; presumably it just stays in whatever gear it was last set to.
At this point, automatic bike transmissions are not taken very seriously among cycling enthusiasts. Some are put off by the extra weight; some feel it’s not worth the money just to avoid having to move a lever; and some just think automatic transmissions are for wimps.



FLASH BACK KNOW HOW THE BICYCLE ? 


 

Bike. Transport equipment and exercise is still being conserved until now. The technology continues to evolve. From that time are still modest, has now become more complicated, and into many types, according to the needs of the wearer. Even so, the system remains essentially the same. Anyway, the bike is moving stick with stroke. How does the system work bike, consider the following.
Simply put, the power stroke of the foot moves forward gear. Front gear connected to the rear gear with the chain. Because interconnected, front gear when rotated the rear gear will also rotate and rotate the rear wheels.
If you notice, there is a bike that feels heavy or light when pedaled. Bike and rider weight affect this. But not only that. Another factor affecting among other things the number of gear ratio between front and rear gear, wheel size, the width of the tire tread, and the friction between moving parts.
Simply put, if the friction and weight of the bike is equated, it will get the following conclusions:- The weight of the bike pedaling the higher speed can be achieved. (Front gear ratios - the back is big enough)- The mild stroke bike, the lower the speed that can be achieved. (Front gear ratios - the back is quite small)
This conclusion is not absolute, because it depends on the strength of the stroke and the habits of each cyclist.
Factors heavy strokes:

    
The weight of the heavy bike
    
Fairly large front gear (number of teeth a lot)
    
The rear gear is quite small (number of teeth a little)
    
Large diameter rear wheels
    
Tire tread width
    
Friction large components
    
The sitting position is too low

Factors stroke feels light:

    
The weight of the bike light
    
Front gear small enough
    
The rear gear large enough
    
Small diameter rear wheel
    
Narrow tire tread
    
Minimal friction components
    
Optimal sitting position

The weight of the bike depends on the type of bike. Bicycles for competition is made possible se-light with enough force, in order to go fast. The bikes that we used to wear, made to be strong and durable at an affordable price, so it is relatively heavier.  


Gear ratio has been no problem for the modern bicycle. Because it is equipped with a multi-speed gear shift, which we can use as needed. For bikes with a single gear, the gear can be removed and replaced with a size deemed more fitting.
The wheel also depends on the type of bike. Bike racing has a large diameter in order to go fast. MTB wheel size is slightly smaller. Type folding bike small diameter so quick. Usually the wheel size can not be replaced with different sizes, because it is limited to the size of the bike frame.
No tire tread width and there were narrow. Tires with good tread width for use in off-road terrain, because the force is large enough friction . However, when used on the road might be a bit heavy. Tires with good tread narrower use on the highway and the terrain is flat, but it is risky when used in off-road terrain.
Keeping the bike always smooth motion components, can be done by giving a little lubricant. This can reduce the friction between the components slightly aggravate stroke. However, if excessive, the lubricant will catch a lot of dust from the air so that the components will be quickly soiled.
The sitting position should be regulated so optimal, not too low or too high. The position is too low to make the stroke feels heavy and may cause injury. The position is too high to make the legs can not stand properly, and can also cause injury.



      

fixed Gear
Fixed Gear itself is a name quite literally, this is not a nickname, cool name, or acronym. Fixed = glued / immovable / patents and Gear = gear / gear. So logically Fixed Gear is a gear that does not move, less so understanding.
In simple, which drives a bike (or other vehicle) is a section called "Drive train."
Drive train itself is actually a combination of various components that are interconnected and constitute the basis of a bicycle drive system, consisting of pedals, crank arms (crank arm), the front gear (chain ring), the rear gear (cog), and of course, the chain (chain).
Combined parts in the pedal known as the "Crank" or "crank set", ie pedal, crank arm and chain ring. Then the chain would circle cog chain ring and tied connected to the rear wheels.
When the pedal is stepped on, crank arm will follow, rotate chain ring attached, which then pulls the chain that also automatically invite cog to rotate, and because he was attached to the rear wheel, the wheel turn around and glide us. Simple mechanism, which more or less has never changed since the creation of this system.
The simplicity of this system brings an obstacle. Entanglement all drive train components are that make the logic of "turning the pedals, the rear wheel was spinning" can walk. By the same logic, meaning that as long as the rear wheels spin, the pedals will rotate.
Because all components of the drive train is bound to die one another, with no free movement. The rear gear which only rotates to follow rotation of the chain or wheel known as "Fixed Gear." Pedal is turned forward, the rear wheels spinning forward. Pedal rotated to the rear, the wheels spin backwards. And vice versa.
Because of the relation between the legs, crank, chain and rear wheel are to be "one", then to set the rate of speed of rotation of the wheel can be controlled by our own leg muscles. Even to stop the bike in total can be done with a fixed gear bikes without brakes aid in general. So the use of brakes on a fixed gear bike into an optional choice, whether riders want more secure by installing a brake or fairly confident in his ability to stop the bicycle with leg power alone. This mechanism is different from the brake "Torpedo", which will be described hereinafter.
About 20 years after the system was created "chain drive" fixed gear this, comes a new technology known as "Freewheel", or literally, "Roda Free."freewheelfreewheel mechanism
Freewheel itself is a rear gear system that gives the freedom of the rear wheels spin independen of the pedal. So when the pedal is rotated, the chain and the rear wheels will follow as usual, but when the legs stop turning the pedals, chains joined stopped moving, the rear gear stopped rotating, but the rear wheels can still rotates with momentum. Freewheel drive train arguably just locked unidirectional only.
Because the rear wheels is now not locked die with the rotation pedal, the bike can be more comfortable cycling, using the technique of "coasting." (Drove without constantly turning the pedals) Freewheel is more frequently encountered in the bicycles are modern and all its forms, from children's bicycles to the Tour de France.
The brake system "Torpedo", a bicycle that stepped on the brakes method. Torpedo brake itself is mounted on a bicycle-based freewheel, and become an internal part of the rear wheel hub. Bicycles torpedo can be identified from a small lever that comes out of the rear hub and "tied" to the bicycle frame seat stay. At first glance looks like a bicycle could torpedo a fixed gear bike break less / without brakes, but because drive train based freewheel, he will not be categorized into fixed gear bikes.
Bicycles Fixed Gear / Fixie / Doort rap is a bike that drive train not use the freewheel. All forms of bikes, all colors, regardless of function, size and number of wheels, the brand, can be categorized into a fixie when drive train system using fixed / without freewheel.Types of bicycles
Now the bike has a variety of names and models. Grouping is usually based on the function and size.

    
Mountain bike, used for off-road with a strong frame, suspension, and a combination of speed up to 27.
    
Road bike, used for road racing, the overall light weight, smooth tires to reduce friction with the road, the combination of speed up to 27
    
Bicycles BMX, which stands for bicycle moto-cross, widely used for attractions
    
City bike (City bike) is a bicycle commonly used in urban areas with good road conditions. Bicycles types of highly stressed fungsional aspect. Usually has a luggage rack and basket.
Bicycles kind City bike with lift and basket 


Mountain bike, used for off-road with a strong frame, suspension, and a combination of speed up to 27.
    
Road bike, used for road racing, the overall light weight, smooth tires to reduce friction with the road, the combination of speed up to 27
    
Bicycles BMX, which stands for bicycle moto-cross, widely used for attractions
    
City bike (City bike) is a bicycle commonly used in urban areas with good road conditions. Bicycles types of highly stressed funsional aspect. Usually has a luggage rack and basket.
Bicycles kind City bike with lift and basket

    
Mini bikes, included in this group are children's bicycles, both two-wheeled and three-wheeled
    
Bicycle transportation or bike classic design (old), included in this group are moped, bicycles and bicycle posts that have strong iron and large wheel diameter capable for both tandem and carry items.
    
Folding bike, a type bike that can be folded in seconds so that it can be taken anywhere with ease
    
Racing bikes, bike models semicircle and their handlers are used for the race.
    
Motorcycles, powered by a fuel manifold using gasoline as the primary power source. With the growing technology on a two-wheeler industry.  



                                                                    X  .  IIIII 
                                             TELECOMUNICATION TRANSMISSION  

Characteristics of Telecommunications Transmission System ;
             Hasil gambar untuk transmisi telekomunikasi    
                                                       eLEMENT OF TRANSMISSION

Transmission is a process of transporting information from a point that acts as a transmitter (sender information) to another point that acts as a receiver (receiver of information) where the distance between points can be very far away. The points that there could be many in number and form a telecommunications network. To connect between the network element requires an interface system called the transmission system.


Transmitter: On the transmitter occurs processing the input signal (which includes encoding and modulation) into an output signal corresponding to the transmission channel.
     Transmission Channel: Channel is a media transmission link between the transmitter with the receiver. In the process of transmission, the signal will suffer attenuation caused by the transmission channel itself. The farther the distance transmission of data, then the greater the damping will occur.
     Receiver: At the receiver, the received signal will be reprocessed. This processing includes filtering is filtering out noise contained in the signal, namely the strengthening of reinforcing the signal amplitude attenuation that has been exposed, equalization, and demodulating and decoding the signal format that is to return to its original shape . 



Gambar terkait 

                                   Gambar terkait  

                                               TRANSMISSION CHANNELL 

GENERALSubmission of information from an information source to the receiver of information can be accomplished when there is a media delivery system or in between. If the distance between the source of information to the receiver near the information, the transmission system that is used simply through the air. However, if the distance of both remote and very remote, it takes a more complex transmission system. The transmission system can consist of one or more transmission media. The medium used in this system can be either physical media (cable) and non-physical (wireless).Physical transmission medium is a transmission medium that has a physical form. Physical media is generally using cables, wave guide or optical fiber, while the non-physical media such as air or free space (free space). The transmission line is a very important component in the transmission system both wired and wireless systems. In the wireless transmission system, the transmission line is used to connect the transmitter with a transmitter and receiver antenna and receiver.
II. MEDIA TYPES OF TRANSMISSION LINES
Although it is common media used on the transmission channel high frequency or microwaves (microwaves) can be either a conductor or a hollow conductor, but the application can we distinguish in four categories, namely:a. Two parallel wire transmission line (two-wire transmission line)b. Coaxial transmission line (coaxial transmission line)c. Micro strip and strip lined. A wave guide (wave guides)
Two-wire transmission line is only suitable for use in areas lowest frequency of the radio frequency spectrum because the higher frequency transmission line of this type have a very large attenuation. To fix the limitations of two-wire line is then at higher frequencies, use parallel conductor pair is replaced by a pair of conductors are arranged in the same axis, called a "coaxial". With this channel attenuation experienced by electromagnetic fields can be reduced. In the area of ​​higher frequencies (microwaves), coaxial channel is not suitable for electromagnetic wave propagating in the form of radiation penetrating the dielectric material channel so that the damping increases.For that, use a channel in the form of a hollow conductor, called a wave guide. As for linking short distances, at these frequencies typically used so-called strip line transmission lines and
microwave. Based on the physical construction of the transmission line can be distinguished, namely:
2 Two-wire (Twin Lead)Is a two-wire line that consists of a pair of parallel conductors separated by a dielectric material types polythylene. These channels usually have a characteristic impedance 300sampai 600dan widely used to connect a television receiver and the receiver in the area of ​​Very High Frequency (VHF). Physical structure can be seen in Figure 2.1. The dotted lines in the figure indicate the magnetic field arises around the inductor, while the line is not dashed showed electric field. 





                                                      figure two wire line 


3 Coaxial Line
An unbalanced line (unbalanced line), where one of its wires are used as a protector for the other wires in the same axis. Her second wires are separated by a dielectric material Polyethelyne or teflon.

The transmission line is most widely used to transmit radio frequency energy (RF), both the transmitter and receiver system. Impedance characteristics vary, ranging from 50 Ω to 75 Ω. The physical structure and the pattern of the terrain can be seen in Figure 2.2 where the dotted lines indicate the magnetic field, while the line is not dashed showed electric field.  



         

                                                            Figure coaxial cable 

4 Balanced Shielded LineIs a fusion of two channels of wire line and coaxsial, where his two wires parallel to each other, but to reduce the losses of radiation used protective (shielded) of braided metal fibers such as the coaxial line. This cable has better characteristics than the two-wire cable.
5 Microstrip and striplineIs a form of physical transmission channel in the form of wires that are stiff. The transmission line of this type typically used to work at microwave frequencies region (order GHz) and is used to connect electronic devices within close. Microstrip channel usually made in the form of primed Cabling Board (PCB) with a special material that has low losses at microwave frequencies.
6 pointer wave (waveguides)A waveguide (waveguides) is a single channel that serves to deliver the electromagnetic wave (microwave) with a frequency of 300 MHz - 300 GHz. In fact, the waveguide is a transmission medium that serves to guide the waves in a particular direction. At very high frequencies, above 1 GHz, the transmission line is no longer effective as a medium for the transmission of electromagnetic waves, such as the frequency of the radiation effects of channel attenuation is already too big.The characteristic impedance and wave propagation mode in this type of channel different from previous types. One application of this waveguide is an optical fiber. Although the condition is shaped wires, but the fiber optics transmission line type "waveguide", in this case, a circular waveguide (circular waveguide). Other applications that are as feeder (feeder) on a dish antenna. The waveguide as in the picture 



Hasil gambar untuk waveguide pictures  Hasil gambar untuk waveguide pictures 

CHARACTERISTICS OF TRANSMISSION LINES
When the relationship between the signal source to the load is in progress, then the signal will propagate in pair wires to the transmission line to the other with a certain speed. The longer the transmission line, the travel time of the signal propagation will be longer. The current flowing along the channel will generate a magnetic field that surrounds the wires and sometimes each other coincides with the magnetic field emanating from the wires around them. The magnetic field generated by an electric current carrying wires, a pile of stored energy in the wires so that it can be considered that the wires are inductive or inductance.Tension that exists between the two wires will generate an electric field. The electric field is also a heap of energy may also benefit coincides with the electric field around them, so that there will be capacitance between two wires. For long channel,
inductance and capacitance will be spread evenly on all the channels and the amount depends on the frequency of signals or waves that propagate therein.Each type of two-wire transmission line also has a conductance value that is a value that represents the possibility of the number of electrons that flow (current) passing through or penetrate dielectrics channels. If the channel is considered to be uniform (uniform), where all values ​​are the same magnitudes along the channel, then small pieces of the channel can be considered to represent the overall length.
IV. IMPEDANCE CHARACTERISTICS
Waves that propagate on the transmission line length is infinite, it will not affect what is at the threshold of the channel. Comparison between threshold voltage and current input channel can actually be considered equal to the ratio between the voltage and current after reaching the other end. It has been suggested that the current and voltage between the two wires looked channels as a transmission line impedance. Impedance is called "Characteristic Impedance (ZO)".
ZO = forward current / voltage forward. ................................... (2.1)
So it can be said that the characteristic impedance is the impedance measured at the threshold of the transmission line of infinite length. When power is propagated on the transmission line infinitely long, then power it
will be absorbed entirely along the channel as a result of the leak current in the capacitance between the conductor and the loss of voltage on the line inductance.  



 

Characteristic Impedance Measurement  

In the Figure, it is shown that the impedance seen at the point of 1'-2 'to 1-2 finite) to the right is of ZO well. But with the voltage and current levels are smaller than the voltage at the point 1-2. So if the impedance at the point of 1'-2 'is replaced with a load impedance of ZO, then the impedance of ZO at point 1-2 going well.The characteristic impedance channel lossless (losses-line) can be written as follows:ZO = (root L / C) [W / m] ..... ................................ ................ (2.2)Where :L = total inductance two wires along the line l (Henry)C = capacitance between the two wires length l (Farad)
Large characteristic impedance of a transmission line or waveguide is different and its value is determined by the physical size and the cross section of the dielectric material used as an insulator.
V. LOSS-OF INCOME (LOSSES) ON TRANSMISSION LINES
The voltage and current of a signal that propagates along the transmission line will decrease with distance is longer, this means that the transmission line has a loss.There are generally three kinds of losses contained in the transmission line that is being passed signals, namely:
a. Loss-Loss CopperLoss-loss, among others in the form of power dissipation (I2R) in the form of heat resistive and losses due to the skin effect (skin effect). The higher the frequency, the greater the resistance caused by the skin effect, so this result in losses greater channel. So in addition to the resistance caused by  alone, losses of copper is also due to the skin effect, which causes the resistance of the conductor at high frequency also increases.
b. Dielectric Loss LossThis loss incurred due to the warming that has occurred on the wires when the current passed back and forth. Power is transmitted source signal is partially converted into heat which occursthe dielectric material. When the current passed back and forth, then the atomic structure of the dielectric material will undergo a change and the change requires energy. It is this energy that gives rise to power losses. The more difficult the atomic structure of a dielectric material change, the greater its energy needs, which means the greater the power loss caused by it.
c. Loss-Loss Radiation and inductionThis loss occurs due to electromagnetic fields that exist around wires. Induction losses occur when the electromagnetic field around the conductor of a direct hit by a conductor that, consequently lost power at the conductor. Radiation losses are losses that caused the loss of most of the lines of magnetic force due to gushing out of the transmission line.Attenuation arising from losses in transmission line expressed in decibels per unit or neper per unit length. 



E1 On Telecommunications Transmission  


Is the E1?

E1 is a digital transmission medium used in the telecommunications world. If you enter the working world of telecommunications, you will often encounter such thing as E1. E1 is the standard digital transmission medium used in Indonesia and other countries like the United States. 1 E1 has 30 Time Slot with a speed of 2 Mbps.

So each time slot to send and receive an 8-bit samples, usually encoded according to the law-algorithm A, 8000 times per second (8 x 8000 x 32 = 2.048 million).
It is ideal for voice phone calls where the voice samples into 8 bit numbers at that data rate and reconstructed on the other end. The time slots are numbered from 0 to 31.
One time slot (TS0) is reserved for framing purposes, and alternately transmit a fixed pattern. This allows the receiver to lock on to the beginning of each frame and match each channel in turn.

cables E1  



 

E1 cable has the following characteristics:

     The outer skin is the same as wired LAN / UTP is colored gray black ato
     2nd layer contained aluminum foil wrappers
     a layer of plastic wrap to -3
     Color: Blue / White - Green / White, Orange / White - Brown / White, Blue / Red - Green / Red, Orange / Red - brown / red,
     There is a grounding wire 


 

E1 cable is usually installed in the terminal DDF. DDF connect between devices that use wired E1 Telecommunication for Transmission media such as connecting to TRC MSC, MSC to BSC, BSC to Transmission.

Well, so first of this topic, in the next post I will discuss how to install the E1 cable on DDF



Hasil gambar untuk transmisi telekomunikasi adalah  


                                                                      X  .  IIIIII 
                                                             Transmission on the lights  


           Hasil gambar untuk Transmission on the lights      Gambar terkait 


Do lenses affect light transmission?

Photographic lenses are made of several elements of very pure glass, each element being carefully coated to limit reflection. However, a portion of the light is lost in the optical system due to residual reflection and absorption.
The transmission factor (the proportion of light that actually makes its way to the sensor) depends on the optical formula (the number of lenses, the glass and coating formulas) and to a lesser degree on the shooting parameters.
As a measure of transmission, DxOMark reports the T-stop, defined as the f-number of a lens with 100% perfect transmission, and resulting in the same illumination of the sensor at the image center as the lens to be measured.

  

 

Light Absorption, Reflection, and Transmission 

We have previously learned that visible light waves consist of a continuous range of wavelengths or frequencies. When a light wave with a single frequency strikes an object, a number of things could happen. The light wave could be absorbed by the object, in which case its energy is converted to heat. The light wave could be reflected by the object. And the light wave could be transmitted by the object. Rarely however does just a single frequency of light strike an object. While it does happen, it is more usual that visible light of many frequencies or even all frequencies is incident towards the surface of objects. When this occurs, objects have a tendency to selectively absorb, reflect or transmit light certain frequencies. That is, one object might reflect green light while absorbing all other frequencies of visible light. Another object might selectively transmit blue light while absorbing all other frequencies of visible light. The manner in which visible light interacts with an object is dependent upon the frequency of the light and the nature of the atoms of the object. In this section of Lesson 2 we will discuss how and why light of certain frequencies can be selectively absorbed, reflected or transmitted.


Visible Light Absorption

Atoms and molecules contain electrons. It is often useful to think of these electrons as being attached to the atoms by springs. The electrons and their attached springs have a tendency to vibrate at specific frequencies. Similar to a tuning fork or even a musical instrument, the electrons of atoms have a natural frequency at which they tend to vibrate. When a light wave with that same natural frequency impinges upon an atom, then the electrons of that atom will be set into vibrational motion. (This is merely another example of the resonance principle introduced in Unit 11 of The Physics Classroom Tutorial.) If a light wave of a given frequency strikes a material with electrons having the same vibrational frequencies, then those electrons will absorb the energy of the light wave and transform it into vibrational motion. During its vibration, the electrons interact with neighboring atoms in such a manner as to convert its vibrational energy into thermal energy. Subsequently, the light wave with that given frequency is absorbed by the object, never again to be released in the form of light. So the selective absorption of light by a particular material occurs because the selected frequency of the light wave matches the frequency at which electrons in the atoms of that material vibrate. Since different atoms and molecules have different natural frequencies of vibration, they will selectively absorb different frequencies of visible light.


Visible Light Reflection and Transmission

Reflection and transmission of light waves occur because the frequencies of the light waves do not match the natural frequencies of vibration of the objects. When light waves of these frequencies strike an object, the electrons in the atoms of the object begin vibrating. But instead of vibrating in resonance at a large amplitude, the electrons vibrate for brief periods of time with small amplitudes of vibration; then the energy is reemitted as a light wave. If the object is transparent, then the vibrations of the electrons are passed on to neighboring atoms through the bulk of the material and reemitted on the opposite side of the object. Such frequencies of light waves are said to be transmitted. If the object is opaque, then the vibrations of the electrons are not passed from atom to atom through the bulk of the material. Rather the electrons of atoms on the material's surface vibrate for short periods of time and then reemit the energy as a reflected light wave. Such frequencies of light are said to be reflected.


Where Does Color Come From?

The color of the objects that we see is largely due to the way those objects interact with light and ultimately reflect or transmit it to our eyes. The color of an object is not actually within the object itself. Rather, the color is in the light that shines upon it and is ultimately reflected or transmitted to our eyes. We know that the visible light spectrum consists of a range of frequencies, each of which corresponds to a specific color. When visible light strikes an object and a specific frequency becomes absorbed, that frequency of light will never make it to our eyes. Any visible light that strikes the object and becomes reflected or transmitted to our eyes will contribute to the color appearance of that object. So the color is not in the object itself, but in the light that strikes the object and ultimately reaches our eye. The only role that the object plays is that it might contain atoms capable of selectively absorbing one or more frequencies of the visible light that shine upon it. So if an object absorbs all of the frequencies of visible light except for the frequency associated with green light, then the object will appear green in the presence of ROYGBIV. And if an object absorbs all of the frequencies of visible light except for the frequency associated with blue light, then the object will appear blue in the presence of ROYGBIV.
Consider the two diagrams below. The diagrams depict a sheet of paper being illuminated with white light (ROYGBIV). The papers are impregnated with a chemical capable of absorbing one or more of the colors of white light. Such chemicals that are capable of selectively absorbing one or more frequency of white light are known as pigments. In Example A, the pigment in the sheet of paper is capable of absorbing red, orange, yellow, blue, indigo and violet. In Example B, the pigment in the sheet of paper is capable of absorbing orange, yellow, green, blue, indigo and violet. In each case, whatever color is not absorbed is reflected.

Check your understanding of these principles by determining which color(s) of light are reflected by the paper and what color the paper will appear to an observer.


Transparent materials are materials that allow one or more of the frequencies of visible light to be transmitted through them; whatever color(s) is/are not transmitted by such objects, are typically absorbed by them. The appearance of a transparent object is dependent upon what color(s) of light is/are incident upon the object and what color(s) of light is/are transmitted through the object.

Express your understanding of this principle by filling in the blanks in the following diagrams.
 


Transmission of Light Defined

Visible light is the reason we are able to see anything at all. Light moves as a wave, bouncing off objects so we can see them. Without it, we'd be in complete darkness. But, in physics, light can refer to any kind of electromagnetic wave: radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, or gamma rays.
When you shine light on an object, a number of things can happen. Reflection is when light bounces off of a surface. Specular reflection is when light reflects off of a shiny surface like a mirror. Diffuse reflection, however, is when light illuminates a dull object.
Another thing it can do is move through the material, and depending on exactly how it does this, we might call it transmission, refraction, or absorption. We will discuss each in more detail in this lesson, but transmission of light is when light waves move all the way through a material without being absorbed.

Transmittance

When light moves through a transparent (or semi-transparent) material, it can be transmitted, absorbed, or reflected. The transmittance of a material is the proportion of the incident (approaching) light that moves all the way through to the other side.
For example, let's say you're shining a flashlight on a semi-transparent glass block. You start off with 100% of your incident light. The first thing that happens is that 30% of that light is reflected off the outer surface of the glass. This leaves you with 70% to continue through the glass block. Another 50% of the light is absorbed by the molecules inside the glass block itself. That leaves you with 20% that emerges from the opposite side. So you could say that the glass block has a transmittance of 20%.
The transmittance of a material depends on its thickness, but it also depends on the type of light (or electromagnetic waves) you are using. A material might have a different transmittance for visible light than it does for infrared, or X-rays. This is why hospital X-rays go through your skin until they reach the bones,even though visible light does not .

Hasil gambar untuk Transmission on the lights   Hasil gambar untuk Transmission on the lights  concept0.jpg

     Hasil gambar untuk Transmission on the lights      


                                                                   X  .  IIIIIII  

                                                           Transmission on biology  

 

 Synaptic Transmission Hasil gambar untuk Transmission on biology  

Gambar terkait 

nerve cell gif nerve cell transmission 


How Antidepressants Work ? 

Causes of Depression
So, what causes MDD? The exact cause is unknown, but research has focused on the balance of certain chemicals called neurotransmitters, specifically serotonin, norepinephrine (also called noradrenaline) and dopamine. These neurotransmitters, especially serotonin, are prevalent in the areas of the brain -- like the limbic system and upper brainstem -- that control mood and emotions.

limbic system 

Research indicates that patients with MDD either do not have enough serotonin or norepinephrine in these areas of the brain or have an imbalance between the two types of neurotransmitters. Antidepressants are designed to increase the levels of these neurotransmitters in the limbic system. So, to understand how antidepressants work, we must look at the process of neurotransmission.
Note
Many addictive drugs (like cocaine, methamphetamines, LSD, heroin and marijuana) affect the same pathways and neurotransmitters as MDD does.
Your brain and nervous system are made of nerve cells, or neurons. Like wires in your home's electrical system, nerve cells make connections with one another in circuits called neural pathways. Unlike wires in your home, nerve cells do not touch, but they come close together at synapses. At the synapse, the two nerve cells are separated by a tiny gap, or synaptic cleft. The sending neuron is called the presynaptic cell, while the receiving one is called the postsynaptic cell. Nerve cells send chemical messages called neurotransmitters in a one-way direction across the synapse from presynaptic cell to postsynaptic cell.


nerve cell transmission  

Nerve Communication
Let's see how the nerve communication process works.
­­Nerve communication
­
  1. The presynaptic cell (sending cell) makes serotonin (5-hydroxytryptamine, 5HT) from the amino acid tryptophan and packages it in vesicles in its end terminals.
  2. An electrochemical nerve signal passes down the presynaptic cell into its end terminals.
  3. The nerve signal stimulates the vesicles containing serotonin to fuse with the cell membrane and dump serotonin into the synaptic cleft.
  4. Serotonin passes across the synaptic cleft, binds with special proteins called receptors on the membrane of the postsynaptic cell (receiving cell) and sets up a new electrochemical signal in that cell (the signal can stimulate or inhibit the postsynaptic cell). Serotonin fits with its receptor like a lock and key.
  5. The remaining serotonin molecules in the cleft and those released by the receptors after use get destroyed by enzymes in the cleft (monoamine oxidase (MAO) and catechol-o-methyl transferase (COMT)). Some get taken up by specific transporters on the presynaptic cell (reuptake). In the presynaptic cell, the absorbed serotonin molecules get destroyed by MAO and COMT. This enables the nerve signal to be turned "off."
A similar process occurs for norepinephrine, which is also implicated in mood, emotions and MDD. Serotonin, norepinephrine and dopamine are chemically similar and belong to a class of neurotransmitters called monoamine neurotransmitters. Because these chemicals are structurally similar, they are all recognized by the enzymes MAO and COMT.

SSRI and Tricyclic Antidepressants
prozac
Stephen Chernin/Getty Images
Prozac is one of the most
prescribed antidepressants.
Antidepressants are designed to block various aspects of the synaptic transmission process in serotonin, norepinephrine and dopamine-containing neurons in the brain. This increases the levels of these neurotransmitters. By increasing the levels of these neurotransmitters, mood and emotions should stabilize and perhaps return to normal. However, because some of these neurotransmitters (like norepinephrine) are contained in neural pathways in other parts of the brain and nervous system, some antidepressants can have side effects (like changes in blood pressure and saliva production). Also, because the pathways involved in MDD are in the lower brain and brainstem, antidepressants may interfere with other functions, like appetite, sleep and sexual function.
Antidepressants are classified according to which neurotransmitters they affect and how they affect them. Let's look at the different types of antidepressants.
Selective Serotonin Reuptake Inhibitors (SSRI)
SSRIs, the most frequently prescribed antidepressants, were introduced in the mid-1980s. SSRIs block the transport of serotonin back into the presynaptic cell. This action increases the concentration of serotonin in the synaptic cleft, increasing stimulation of the postsynaptic cells. SSRIs include the following drugs:
  • fluoxetine (ProzacTM)
  • paroxetine (PaxilTM)
  • sertraline (ZoloftTM)
  • fluvoxamine (LuvoxTM)
  • citalopram (CelexaTM)
  • escitalopram (LexaproTM)
The various SSRIs are equally effective and equally tolerated by patients. Not everyone reacts in the same way, however, so some patients may experience more side effects with one type of SSRI than with another. Most of the time, patients have to take antidepressants more than once per day. However, fluoxetine has a longer half-life -- it remains in the body longer, so patients can usually take it once a day. This lowers the chance of missing a dose. At high doses, paroxetine and sertraline will interfere with dopamine and serotonin neurotransmission.
To minimize side effects that might cause a patient to stop using the drug, primary health-care providers usually start SSRIs at low doses and slowly increase to the target dose over four to six weeks. Such side effects include nausea, dizziness, vertigo, vomiting, insomnia, anorexia, anxiety and sexual dysfunction.
Tricyclic Antidepressants and Selective Norepinephrine Reuptake Inhibitors
Tricyclic antidepressants were introduced in the late 1950s and early 1960s. Like SSRIs, these compounds block the reuptake of norepinephrine by the presynaptic cell, thereby increasing its concentration in the synaptic cleft. Tricyclic antidepressants include:
  • nortryptiline (PamelorTM)
  • maprotiline (LudiomilTM)
  • desipramine (NorpramineTM)
  • amitryptiline (ElavilTM)
  • clomipramine (AnafranilTM)
  • imipramine (TrofranilTM)
Tricyclic antidepressants affect heart rate and blood pressure because norepinephrine is also used in the autonomic nerves that control these functions. Their side effects include postural hypotension (drop in blood pressure upon standing), tachycardia (rapid heart rate), dry mouth, urinary retention and blurry vision. Tricyclic antidepressants are not used often because they are toxic and easily overdosed. However, for patients who do not tolerate SSRIs or other antidepressants, tricyclics are effective. Physicians must monitor the patient closely for toxic side effects.
Tric­yclic antidepressants are nonselective inhibitors of norepinephrine reuptake because their chemical structures look like norepinephrine. Reboxetine (EdronaxTM­) is a more specific reuptake inhibitor because it binds better to the reuptake transporter, but it isn't available in the United States.

SNRI, MAOI and NaSSA Antidepressants
Serotonin-Norepinephrine Reuptake Inhibitors (SNRI)
These drugs were introduced in the mid-1990s and block the reuptake of both serotonin and norepinephrine by binding to the transporters of these neurotransmitters on the presynaptic cell. SNRIs include:
  • bupropion (WellbutrinTM) -- blocks dopamine and norepinephrine reuptake as well
  • duloxetine (CymbaltaTM)
  • venlafaxine (EffexorTM)
The side effects of these drugs are similar to, but less than, those of SSRIs. Bupropion and duloxetine, in particular, have minimal side effects in the areas of sexual dysfunction and weight gain.
MAO Inhibitors

Monoamine Oxidase Inhibitors (MAOI)
An enzyme called monoamine oxidase can degrade serotonin and norepinephrine in the synaptic cleft and presynaptic cell. MAOIs block this degradation, increasing the concentration of the neurotransmitters. MAOIs include:
  • phenelzine (NardilTM)
  • tranylcypromine (ParnateTM)
  • selegiline (EldeprylTM)
  • isocarboxazid (MarplanTM)
  • moclebemice (ManerixTM)
Because these drugs can interfere with norepinephrine, they can have cardiovascular side effects. Most commonly, patients must limit their consumption of foods containing tyramine because the drugs interact with tyramine to cause hypertension (high blood pressure). Tyramine can be found in foods like soy sauce, sauerkraut, chicken and beef livers, aged cheese, sausage, cured meat and fish, yogurt, raisins, figs and sour cream. Patients also have to refrain from consuming alcohol when on these antidepressants. Because of these interactions, doctors do not prescribe this class of antidepressants as frequently as others.
Noradrenergic and Specific Serotonin Antidepressants (NaSSA)
Some of these compounds were introduced in the mid-1980s and others even more recently. NaSSAs block negative feedback effects on norepinephrine and serotonin secretion by the presynaptic cell. This action increases the concentrations of these neurotransmitters in the synaptic cleft. They also block some serotonin receptors on the postsynaptic cell, which enhances serotonin neurotransmission. These compounds include
  • Mirtazipine (RemeronTM)
  • Trazodone (DesyrelTM)
  • Nefazodone (SerzoneTM)
  • Mianserin (BolvidionTM)
The most common side effects are drowsiness, dry mouth, increased appetite and weight gain.

Remember that the available antidepressants are about equally effective in treating MDD. So, choices are based on patient's age, family history, drug tolerance, side effects and past response to antidepressants.

Acute phase
Here, the goal is to get the patient into remission (a state with minimal symptoms). This usually involves beginning antidepressant therapy. Usually, SSRIs are the drug of choice, especially for children and older patients, because they can be used in lower dosages with the fewest side effects. It takes about four to six weeks for any antidepressant to show effects.
Augmenting Antidepressants
Sometimes MDD patients show other symptoms (changes in mood, delusions, hallucinations, changes in energy metabolism) partially due to antidepressant side effects or to other types of depression (like bipolar disorder -- periods of happiness interspersed by periods of severe depression). So, primary care providers may add other medications to antidepressant therapy.
  • Mood stabilizers: lithium, latmotriguine (LamictalTM), valproic acid (DepakeneTM, DepakoteTM)
  • Antipsychotic agents: chlorpromazine (ThorazineTM) or haloperidol (HaldolTM)
  • Thyroxine: thyroid hormone to increase metabolism
The physician and patient start by rating the severity of the untreated symptoms to establish a baseline. During the first four to six weeks on antidepressants, patients may undergo psychotherapy and side-effect monitoring. The physician reassesses the severity of the symptoms and compares them to the baseline. If, after eight weeks, the reduction in severity is less than 25 percent, that antidepressant is considered to offer no improvement. The primary care provider may choose to change the dosage or class of medication, augment the medication or combine classes of antidepressants. If successful, the acute phase of treatment may six to 10 weeks.­­
Continuation phase
After remission begins, doctors try to eliminate remaining symptoms, restore the patient to his or her level of function before the MDD episode and prevent recurrence of further MDD episodes. During this time, the levels of antidepressant therapy and psychotherapy used to achieve remission are maintained. If, after six months, there is no relapse, medication might be discontinued gradually over several weeks. The continuation phase of treatment could last six to 12 months.
Maintenance phase
This phase is most important for patients with annual episodes of depression. During this time, patients should be monitored regularly. Antidepressant therapies sometimes have to be reinitiated. Psychotherapy and patient education are especially important. The maintenance phase can last one to three years.
Special populations and depression therapy
When deciding on therapy, some clinically depressed patients require special considerations:
  • Bipolar disorder -- these patients have extreme mood swings (periods of excessive high spirits followed by severe depressive episodes). Typically, the antidepressants are augmented with mood stabilizers.
  • Children/adolescents -- The SSRI fluoxetine is the only effective (and approved) antidepressant for this age group. There have been reports that children on antidepressants are more likely to commit suicide than those who are not on antidepressants; while some data suggest that this may be true, it has not been proven conclusively. Primary care providers need to weigh the risks of antidepressant therapy versus untreated depression. Most often, treatment carries fewer risks of suicide than non-treatment.
  • Pregnant/postpartum women -- Depression can be a common symptom during pregnancy and postpartum -- it usually corrects itself, but sometimes severe depression must be treated (in about 10 percent of pregnant/postpartum women). Antidepressants can pass to the fetus and through breast milk. The effects of antidepressants on the developing fetus and newborn are not well known. Therefore, doctors should carefully consider the risks and benefits of treatment.
Treatment for depression is not a short-term process but a long-term project with specific goals of remission and maintenance. Multiple approaches of medication, psychotherapy and patient education are most effective in the treatment of MDD. Close consultation with a physician and/or psychiatrist can provide the best treatment options.

another example transmission biology :

Hasil gambar untuk Transmission on biology   Hasil gambar untuk Transmission on biology   Hasil gambar untuk Transmission on biology 


Hasil gambar untuk Transmission on biology

                                      Gambar terkait   


                                    Hasil gambar untuk Transmission on biology
 Prion-like transmission of protein aggregates in neurodegenerative diseases


 Protein folding proceeds through intermediates, which expose hydrophobic amino acid side chains on their surfaces that are normally buried in the interior of the native state, and are therefore prone to self-associate into non-native oligomers (see the figure, part a). Molecular chaperones of the heat shock protein 70 (HSP70) family interact transiently with these aggregation-prone surfaces (see the figure, part b). They either compete with self-association or favour the formation of native contacts and help maintain intermediates in a monomeric, folding-competent state. Mutations or polymorphisms can destabilize the native state or decrease the efficiency of folding. Insufficient amounts of molecular chaperones also affect folding efficiency. Incompletely folded proteins are tagged with polyubiquitin chains, which direct them to the 26S proteasome for degradation (see the figure, part c). Molecular chaperones contribute to this process by maintaining the proteins in a state that can be unfolded by the 26S proteasome. Proteins that escape degradation by the 26S proteasome can be degraded by lysosomes through macroautophagy (see the figure, part d). Autophagic degradation begins with the capture of the substrate proteins (or aggregates) into phagophores that mature into autophagosomes — a vesicular structure enclosed by two concentric lipid bilayer membranes. Autophagosomes fuse with organelles of the endosomal and lysosomal pathways to form autolysosomes that, endowed with acidic pH and lysosomal hydrolases, are able to degrade proteins without the need to unfold them. Finally, the interaction of protein aggregates with the minus end-directed microtubule motor cytoplasmic dynein results in their accumulation around the centrosome or microtubule organizing centre (see the figure, part e). This process may facilitate the capture of aggregates by macroautophagy or may serve to concentrate potentially toxic aggregation nuclei in a defined region of the cell.
Native (sphere) prion molecules undergo conformational changes that lead to an abnormal (cube) form (see the figure; part a, step 1). This event is unfavourable because the abnormal form is either unstable (part a, step 2) or sensitive to clearance. According to the 'template assistance' model, prions in their abnormal form interact with native prions (part a, step 3) and convert them into the abnormal form (part a, step 4). The alternative 'seeded polymerization' model proposes that abnormal prions have the ability to interact with molecules in a similar state (part a, step 5). The oligomeric species formed are unstable because the intermolecular interactions do not outweigh the entropic cost of binding. They grow by the incorporation of abnormal prion molecules (part a, step 6) and dissociate (part a, step 7) until a stable nucleus is formed. Such a stable prion aggregate can then grow indefinitely from one or both ends and can also break into smaller fragments (part a, step 8) that act as nuclei (part a, step 6).
Prion aggregates bind to native prion molecules or receptor proteins attached to the cell membrane, and are internalized by endocytosis (part b, step 1). They reach the cytoplasm, by an unknown process, where they grow by the incorporation of cytosolic prions. They can move along the axon in one direction or another (part b, step 2) and can reach neighbour cells through axon–dendrite connections (part b, step 3) and nanotubes (part b, step 4).
Prions and polypeptides involved in Parkinson's, Alzheimer's and Huntington's diseases form aggregates that resist protein denaturation treatments (see the figure, part c). This process can be monitored experimentally. Stable oligomer formation is thermodynamically unfavourable and this is reflected by a nucleation phase. The stable oligomers elongate in an exponential manner until the soluble protein concentration reaches the critical concentration, above which assembly occurs. These events give a sigmoidal shape to the assembly kinetic (see the figure, part c; green curve). The nucleation phase is abolished (see the figure, part c; orange curve) when preformed aggregates that act as seeds are added to the protein solution.
Prion-like transmission of protein aggregates in neurodegenerative diseases    

Protein folding proceeds through intermediates, which expose hydrophobic amino acid side chains on their surfaces that are normally buried in the interior of the native state, and are therefore prone to self-associate into non-native oligomers (see the figure, part a). Molecular chaperones of the heat shock protein 70 (HSP70) family interact transiently with these aggregation-prone surfaces (see the figure, part b). They either compete with self-association or favour the formation of native contacts and help maintain intermediates in a monomeric, folding-competent state. Mutations or polymorphisms can destabilize the native state or decrease the efficiency of folding. Insufficient amounts of molecular chaperones also affect folding efficiency. Incompletely folded proteins are tagged with polyubiquitin chains, which direct them to the 26S proteasome for degradation (see the figure, part c). Molecular chaperones contribute to this process by maintaining the proteins in a state that can be unfolded by the 26S proteasome. Proteins that escape degradation by the 26S proteasome can be degraded by lysosomes through macroautophagy (see the figure, part d). Autophagic degradation begins with the capture of the substrate proteins (or aggregates) into phagophores that mature into autophagosomes — a vesicular structure enclosed by two concentric lipid bilayer membranes. Autophagosomes fuse with organelles of the endosomal and lysosomal pathways to form autolysosomes that, endowed with acidic pH and lysosomal hydrolases, are able to degrade proteins without the need to unfold them. Finally, the interaction of protein aggregates with the minus end-directed microtubule motor cytoplasmic dynein results in their accumulation around the centrosome or microtubule organizing centre (see the figure, part e). This process may facilitate the capture of aggregates by macroautophagy or may serve to concentrate potentially toxic aggregation nuclei in a defined region of the cell.
Prion-like transmission of protein aggregates in neurodegenerative diseases  



                                                                   X  .  IIIIIIII  

                                               TRANSMISSION ON ASTRONOMY  

Hasil gambar untuk Transmission on astronomy 
 
 Gambar terkait 

Atmospheric Transmission--Good News and Bad News


It is not coincidence that our eyes are sensitive to optical light waves. Optical light can travel nearly unimpeded through our atmosphere, and so our eyes have adapted themselves to be sensitive at these wavelengths. For thousands of years, optical light was our only "window" on the Universe, and even then the primary "instrument" was the naked eye. When Galileo first turned his telescope skyward, he opened this window a little farther and saw many marvelous things for the first time. Yet, as is discussed elsewhere in these pages, optical light is a small portion of the entire range of electromagnetic radiation. How much more could we learn about the Universe if we could use the entire EM spectrum?

Most of the rest of the EM spectrum gets absorbed or blocked by the atmosphere, and it's a good thing, too! Just a tiny portion of ultraviolet light leaking through the atmosphere is enough to give us a painful sunburn if we aren't careful. Can you imagine what earth would be like if ultraviolet or X-ray light could get through the atmosphere? Suffice it to say that we wouldn't be around to "see" it--we would have long since been fried by our own sun! The atmosphere is "good news" from the perspective of life on earth. But the atmosphere is "bad news" if we want to see the Universe at these wavelengths.


This graphic shows schematically how the atmosphere lets some light through while blocking most kinds of light like X-ray, ultraviolet, and parts of the infrared. 

Radio light was the first window after the optical one to be used for astronomy. This is because certain portions of the radio spectral region can pass through the atmosphere and be detected from cosmic sources. As a matter of fact, radio astronomy grew out of the development of radar techniques during World War II. As the first sensitive radio receivers were built, users noticed a persistent faint radio noise that they could not identify. It turns out this "noise" was due to cosmic sources of radio radiation being picked up by accident. Radio astronomy was born!

Certain portions of the infrared spectral region can get through the atmosphere, at least partially. Observatories at high altitude (above most of the water vapor in the atmosphere) can do quite well in certain small wavelength ranges. And special infrared telescopes have been flown on high-flying aircraft to open this window even further. However, many portions of the infrared spectrum get completely absorbed in the atmosphere.

While much can be learned from optical observations, there is also much unique information to be gained from observations in other wavelength ranges that are hidden by the curtain of our atmosphere. For astronomers to observe in most of the EM spectrum, we need to get telescopes in space. It has only been over the last 35 years that this has been possible, with rockets that can lift special telescopes above the atmospheric curtain. Telescopes have now been flown to observe across the entire spectrum! For astronomers, that's good news!  

Astronomical filter


Ultraviolet filters used in astronomy for blocking the ultraviolet radiation, which causes the camera to heat up when photographing (without affecting the image).
 
 
An astronomical filter is a telescope accessory used by amateur astronomers to simply enhance the details of celestial objects (much as with amateur photography). By contrast professional astronomers rigorously use filters on telescopes in order to understand the astrophysics (such as stellar classification and placement of a celestial body on its Wien Curve), occurring for the object in a given bandpass via photometry.
Most astronomical filters work by blocking a specific part of the color spectrum above and below a bandpass, significantly increasing the signal to noise of the interesting wavelengths, and so making the object more visible, 'contrasty', or defined. While the color filters transmit certain colors from the spectrum and are usually used for observation of the planets and the Moon, the polarizing filters work by adjusting the brightness, and are usually used for the Moon. The broadband and narrowband filters transmit the wavelengths that are emitted by the nebulae (by the Hydrogen and Oxygen atoms), and are frequently used for reducing light pollution.


Solar filters

Solar filters block most of the sunlight to avoid any damage to the eyes. They are usually made from a durable glass or a plastic film which transmits 1/100,000th of the light. Film filters are used over the aperture of the telescope and do not heat up significantly, whereas glass filters are used near the objective end causing them to heat up greatly and it is not unknown for them to shatter from thermal shock. Glass solar filters are therefore not recommended by most experts and some stockists refuse to sell them or remove them from telescope packages. "Solar filters designed to thread into eyepieces that are often provided with inexpensive telescopes are also unsafe. These glass filters can crack unexpectedly from overheating when the telescope is pointed at the Sun, and retinal damage can occur faster than the observer can move the eye from the eyepiece."
They are used for observation, photography, and for viewing the sun as a yellow-orange disk. With a telescope, these filters can view the details of the sun directly and safely, especially the sunspots and granulation of the surface.The Herschel Wedge is a prism based device used in conjunction with a neutral density filter that directs most of the heat and ultra violet light out of the telescope, generally giving better results than most filters. Another filter used for solar observing is the hydrogen-alpha filter, which transmits the H-alpha spectral line. These filters can view the solar flares and prominences that are not visible in the normal solar filters.

Color filters

A blue color filter
Color filters work by absorption/transmission, and can tell which part of the spectrum they are reflecting and transmitting. Filters can be used to increase contrast and enhance the details of the Moon and planets. All of the visible spectrum colors each have a filter, and every color filter is used to bring a certain lunar and planetary feature; for example, the #8 yellow filter is used to show Mars's maria and Jupiter's belts. The Wratten system is the standard number system used to refer to the color filter types. It was first manufactured by Kodak in 1909.
Professional filters are also colored, but their bandpass centers are placed around other midpoints (such as in the UBVRI and Cousins systems).
Some of common color filters and their uses are:
  • Chromatic aberration filters: Used for reduction of the purplish halo, caused by chromatic aberration of refracting telescopes. Such halo can obscure features of bright objects, especially Moon and planets. These filters have no effect on observing faint objects.
  • Red: Reduces sky brightness, particularly during daylight and twilight observations. Improves definition of maria, ice, and polar areas of Mars. Improves contrast of blue clouds against background of Jupiter and Saturn.
  • Deep yellow: Improves resolution of atmospheric features of Venus, Jupiter (especially in polar regions), and Saturn. Increases contrast of polar caps, clouds, ice and dust storms on Mars. Enhances comet tails.
  • Dark green: Improves cloud patterns on Venus. Reduces sky brightness during daylight observation of Venus. Increases contrast of ice and polar caps on Mars. Improves visibility of the Great Red Spot on Jupiter and other features in Jupiter atmosphere. Enhances white clouds and polar regions on Saturn.
  • Medium blue: Enhances contrast of Moon. Increases contrast of faint shading of Venus clouds. Enhances surface features, clouds, ice and dust storms on Mars. Enhances definition of boundaries between features in atmospheres of Jupiter and Saturn. Improves definition of comet gas tails

Moon filters

Neutral density filters, also known in astronomy as Moon filters, are another approach for contrast enhancement and glare reduction. They work simply by blocking some of the object's light to enhance the contrast. Neutral density filters are mainly used in traditional photography, but are used in astronomy to enhance lunar and planetary observations.

Polarizing filters

Polarizing filters adjust the brightness of images to a better level for observing, but much less so than solar filters. With these types of filter, the range of transmission varies from 3% to 40%. They are usually used for the observation of the Moon, but may also be used for planetary observation. They consist of two polarizing layers in a rotating aluminum cell, which changes the amount of transmission of the filter by rotating them. This reduction in brightness and improvement in contrast can reveal the lunar surface features and details, especially when it is near full. Polarizing filters should not be used in place of solar filters designed specially for observing the sun.

Nebular filters

Narrowband

The three main spectral lines that Narrowband filters transmit
Narrowband filters are astronomical filters which transmit only a narrow band of spectral lines from the spectrum (usually 22 nm or less). It is mainly used for nebulae observation. Emission nebulae mainly radiate the doubly ionized oxygen in the visible spectrum, which emits near 500 nm wavelength. These nebulae also radiate weakly at 486 nm, the Hydrogen-beta line. There are three main types of Narrowband filters: Ultra-high contrast (UHC), Oxygen-III & Hydrogen-beta, and Hydrogen-alpha, the narrowest of the three filters with 8 nm range. The UHC filters range from 484 to 506 nm. It transmits both the O-III and H-beta spectral lines, blocks a large fraction of light pollution, and brings the details of planetary nebulae and most of emission nebulae under a dark sky.

Broadband

The broadband, or light pollution reduction (LPR), filters are nebular filters that block the light pollution in the sky and transmit the H-alpha, H-beta, and O III spectral lines, which makes observing nebulae from the city and light polluted skies possible. These filters block the Sodium and Mercury vapor light, and also block the natural skyglow such as the auroral light The broadband filters differ from the narrowband with the range of wavelengths transmission. LED lighting is more broadband so this is not blocked although white LEDs have from themselves a considerably lower output around 480 nm which is close to O III and H-beta wavelength. The broadband filters have a wider range because the narrower transmission range causes a fainter image of sky objects, and since the work of these filters is revealing the details of nebulae from light polluted skies, it has a wider transmission for more brightness.These filters are particularly designed for nebulae observing, are not useful with other deep sky objects. However, it can improve the contrast between the DSOs and the background sky, which may clarify the image. 

Transmission and time Efficiency 

Photon collecting efficiency

  1. Efficiency
  2. Transmission efficiency
  3. QE, Filterloss, Time efficiency
  4. Conclusion

1: Efficiency


Have you ever thought about how efficient you collect/detect photons?
Every lens surface transmit about 99%, every mirror surface reflect about 92%, it could be worse or it could be better.

But there is a system of optical parts and together they make up significant losses.
Transmission optical system 
  And then there is also limitations in the sensor efficiency, the QE.
And you also loose time between every sub image you take. I have collected this losses in a table so you can see the scary result.


2: Transmission efficiency

Comparing two kind of telescopes and assuming the same opening and focal length, they are setup with a high quality corrector to make a astrograph of it. Optimized for wide field deep sky. Just a relative comparing.
Also assume a monochrome camera with filter wheel to make rgb color images.
Note. Each lens or filter have two surfaces.
Each line is the contribution of efficiency.
Refractor triplet Transmission Reflector Newton Transmission comments
         
Photons input 100%   100%  
         
Lens 98% Primary mirror 92%  
triplet 98%      
  98% Secondary mirror 92%  
    40% obstruction diameter 84%  
         
Field flattener 98% Coma corrector 98%  
4 lenses 98% 4 lenses 98%  
  98%   98%  
  98%   98%  
         
Filter 98% Filter 98% from filter wheel
         
Camera 98%   98% Camera house
two protection 98%   98% Camera sensor
windows        
         
Total transmission 82% Total transmission 62%  
It doesn't look too bad, we have a throughput of about 82% of the photons in the refractor and 62% in the reflector. Bit it's a bit worse, this was at the center of sensor, vignetting problems maybe will reduce it by half at the corners. But is this the whole true story?
Hasil gambar untuk transmission in universe
 Gambar terkait 

Hasil gambar untuk transmission in universe 

Hasil gambar untuk transmission in universe
   
 














Hasil gambar untuk transmission in universe  


                                                             X  .  IIIIIIIII
                                                    Transmission on weapons  


                          Hasil gambar untuk Transmission on weapons 

                                 Hasil gambar untuk Transmission on weapons      

                          Hasil gambar untuk Transmission on weapons 

                                        Hasil gambar untuk Transmission on weapons    

       Hasil gambar untuk Transmission on weaponsGambar terkaitGambar terkait Gambar terkait

 Hasil gambar untuk Transmission on weaponsGambar terkait

  It has been said that outer space is the ultimate high ground for military engagements, and if we examine orbital space-based weapon platforms seen in sci-fi, it seems that our future will include orbital space as a future battleground. Currently, orbital space is used by military organizations and intelligence services for all manner of satellites that watch and listen. But, could orbital space be militarized? Could we have orbital artillery as predicted by science fiction and the cancelled SDI program? In this blogpost of FWS, we will be discussing orbital artillery and orbital bombardment.
The idea of the militarization of outer space was a real fear in the heady days of the Space Race between the USA and USSR. The Soviets had put up military space stations and a few of them were armed with an 23mm cannon. There was also worry that the arms race would continue into the void of outer space with orbital nuclear missile platforms. In 1967, the United Nations passed the Outer Space Treaty that established legal frameworks on the ownership of celestial bodies, like Luna and Mars. One of the elements of the treaty was preventing orbital weapon platforms that bore nuclear weapons and othe r WMDs. This treaty shaped the research on orbital weapon systems.
The Types of Orbital Artillery

Directed Energy
One of the most common type of orbital bombardment/artillery is directed energy beams that can be used more like knife than an club or even a shower of directed energy death-laser-beams that tear through the planetary surface. Shooting freaking laser beams on the surface of Luna is much easier than shooting them down to Earth or Mars, due to the atmosphere. Any military-grade lethal DE beam would have to be powerful enough to punch through the atmosphere and hit the target with enough energy to be lethal. It is unlikely that lasers will be the orbital DEW system of choice, instead, it is likely that particle beam DEWs would fulfill that role. The use of DE is common in science fiction "kill satellites" as seen in works like Akira.


Kinetic Projectiles or "Rods from God"

Unlike orbiting nuclear weapons, kinetic projectiles are legal under the 1967 Outer Space Treaty (as well as space-based lasers) and instead of those dirty nuclear weapons, these rods from god are able to delivery some serious punch without the nasty after effects of nukes. If we examine the USAF's proposed  kinetic bombardment system, these six meter long tungsten rods impacted the surface of the Earth with the road going at MACH 10 (7,700 MPH). The impact of the rob was equal to between 10 and 120 tons of TNT, less than the 2,000 tons of TNT that the Fat Man and Little Boy Atomic bombs produced when dropped on Japan. Unlike long-range bombers like the B-52 and B-1, the tungsten rods at able to reach their Earth-based target at between 10-15 minutes, and are extremely difficult to intercept like ICBMs or bombers. While this form of orbital artillery is not as effective as nuclear weapons, they can be used in more of combat supporting role and even pre-invasion artillery softening up operations, along with being a effective "bunker buster" system. The data for this section, comes from the Game Theory video: https://www.youtube.com/watch?v=rx5XyspHldk  

Reentry Vehicle

On current ICBMs, re-entry vehicles are used to delivery the nuclear payload safety through the atmosphere and blow the holy jesus out of your enemy. This could be another way to delivery orbital artillery rather than kinetic rods, especially at longer ranges than just orbital space. Reentry vehicles could also pack more countermeasures than just speed to defend themselves. While the RV would be good method of delivering nuclear weapons and other WMDs, they would make for a poor orbital artillery method.
Controlled Meteors
From the Centauri mass driver bombardment of Narn to the Fithp "foot" being shot into the Indian Ocean by rocket motors, meteors have been an excellent form of orbital bombardment, and the oldest...after all, humans are only around due to an meteor strike. Some science fiction works, like Babylon 5 and Starblazers space fleets use controlled meteors and asteroids as a form of orbital bombardment. However, this comes with certain risks...any space rock too big, and you could completely wipe out all life on the planet along with the ecosystem...unless that is your goal, then have at it, and bombing into extinction!

The Dangers of Orbital Artillery/Bombardment
There is nothing more devastating to soldiers than when supporting artillery from field guns to CAS goes wrong. Despite the advancement in battlefield technology, artillery fire can go horribly wrong, and your own forces pay the price. That is the danger today, and that will be a danger tomorrow. Even in video games, nothing is worse than calling down a strike and it wiping out friendly forces. If and when orbital based weaponry becomes a reality, the risk of troops calling down artillery could go horribly wrong, and given the power of rods-from-god, a miscalculation by the director, and an entire city or taskforce could be wiped out. Then there is another risk: overuse. Some orbital bombardment systems have been projected in science fiction as pinpoint laser DE beams able to slice-and-dice enemy tanks and infantry formations. However, the reality is that kinetic bombardment systems would be very powerful, and their overuse or misuse could bring about massive destruction and even nuclear winter conditions. This applies more so to the use of asteroids and meteors as a form of kinetic bombardment, too much and you ruin the planetary ecosystem, and affect global climate change.

Defense Against Orbital Weapon Platforms
Oddly, most military organizations and weapons manufacturers have already put weapon systems into place to counter satellites and the possibility of orbital based weapon platforms. The anti-satellite missile that can be deployed from strike fighters like the American F-15 Eagle, or land based launcher systems, or even submarines/naval vessels. These kinetic-kill warheads are fitted to small multi-stage rockets have proven effective against satellites, and could be effective against orbital weapons platforms as well. While an orbital weapon system could be camouflaged as something else, the moment it began firing, the game would be up, and ASAT weapon systems would be utilized. Of course, one way around this could be the assumed role of the X-37B USAF drone-shuttle: an mobile launcher system based around an space plane design. In the end, one of the best defenses against orbital based weapon platforms is wiping out their command & control system back here on Earth. Whether by direct action, like we saw in Call of Duty: GHOSTS or an EMP blast, any would be effective in taking out one method of controlling orbital weapon platforms.

Real-World Examples of Orbital Weapon System

The THOR Project (USA 1950's-today)
Boeing in the 1950's became working on a kinetic bombardment system called THOR. The idea was to have an orbital artillery system that could not provoke a nuclear exchange, and THOR later would conform to the 1967 Outer Space Treaty. The heart of THOR was long tungsten rods that were the size of telephone poles and could delivery a punch without the risks of nuclear or conventional explosives. Even today, the US Air Force has been continuing the work on THOR as late as 2003. While Project THOR is technical possible, there are challenges with controlling the rod through atmospheric reentry, the cost of putting the system in space, the political heat for having orbital weapons system, and lastly, maintenance. A massive military orbital weapons system would need maintenance, and with the Space Shuttle fleet gone, it would require something like what was seen in COD: GHOSTS to keep the system running. 

Fractional Orbital Bombardment System (USSR 1968-1983)
Leaving it to the Soviets...their space-based weapon system was known as the Fractional Orbital Bombardment System, and basically was putting nukes into space that would be waiting for the order to hit America. Lovely. Th heart of the plan was to put ICBMs into low-orbit, and if the call ever came, the missiles could avoid NORAD and could cut down on flight times, hitting the USA before they could launch their nukes. Of course, the plan is banned under the Outer Space Treaty and the SALT II treaty. While the plan was never carried out, it did lead to Soviet rocket developments, and the entire program was scrapped in 1983.

The Rumored X-37B Space Drone Orbital Weapon Delivery System
For years, there have been rumors of a "secret" space program with their own Space Shuttles and even a space station. In 1999, NASA began the X-37 robotic mini-shuttle program, and in 2004 the USAF took over the project, and began flying the X-37B mini-shuttles on long-term missions for reasons unknown. Recently, X-37B OTV-2 spent 469 days in space, also for reasons unknown. There are some that believe that the X-37B robotic space shuttle is an delivery system for orbital weaponry or an orbital anti-satellite weapons platform that could be using kinetic-based weaponry or even a laser to knock out or fry hostile satellites.  


The 3rd Reich "Sun-Gun"
After the defeat of the 3rd Reich in 1945, the allies began to understand the depth of the scientific knowledge of the Nazis and how much they were pushing the envelope of technology. One of those projects was an orbital weapon system called "Soonengewehr". The Sun-Gun called for a massive 100 meter wide mirror that could focus the sun's light into a directed energy beam that could target any portion of the Earth. This would have orbited at 8,200 kilometers above the Earth, and would have been constructed into portions by the stillborn Nazi space program. The sun-gun would have been manned and possible used Nazi space stations to help construction and maintenance. The Sun-Gun was seen as a tool for 3rd Reich domination of the Earth and a way to keep themselves in power for a 1,000 years. Of course, the allies began winning the war, and after Operation: PAPERCLIP, the Americans felt that the Sun-Gun would have never worked.

The Role of Orbital Artillery/Bombardment in Future Warfare
If humanity is able to escape to the stars and construct off-world colonies and fleets of combat spaceships to protect them, orbital bombardment will be a factor. If there is a armed contest over a settled world, the invading force will need to support the planetary invasion force going dirt-side. While it is likely that any invasion force would carry means of heavy weapons support, the invaders would need time to get the cannons from star-side to dirt-side, and time to setup the field artillery along with any aerocraft.
This is were the orbiting warship comes into play. Any planetary invasion would be first conducted via control of orbital space, much like air superiority. Once that condition has been met, the warships could soften up the planetary defenses via some form of orbital artillery. That could be kinetic rods-from-god or DE weaponry, but either way, the weaponry of the warship would be used in a similar manner to the US Navy using their battleships in World War II to shore bombard prior to an ambitious invasion force landing. After the planetary LZ is secure, and field artillery and CAS are being established, the orbiting warship could be setting up so-called "kill-satellites" to further support the ground forces. This Kill-Sats could be dual-role as well, supporting ground planetary operations with support fire and protecting the planet from any counter-strike.  

From the Fox Mulder Corner...
One of the most infamous video footage of UFOs (or something) in Earth orbit being engaged by some type of weapon systems came from Space Shuttle Orbiter Discovery during STS-48 in September of 1991. Some believe that the amazing footage shows an Earth anti-UFO defense system being use, and missing the alien craft. Of course, NASA and others claim it is ice particles. Even before this, there were claims that the US maintains an orbital weapons system that was piggybacked on the old SDI program. Why does the US military maintain an secret orbital weaponry program. Aliens. Some believe that the US and other nations are fighting a secret war with an alien intelligence.

Orbital Bombardment and Science Fiction
As with many elements in Sci-Fi, EE "Doc" Smith did it first, and this includes orbital bombardment, but it would take the Cold War and the Space Race for science fiction to develop orbital bombardment that was more hard science based. Of course, human beings have been always seen and experienced the power of meteors, and this common human fear is linked to orbital bombardment. During the Cold War, the idea of orbital weapon systems and asteroids-as-weapons took shape with Robert Heinlein's The Moon is a Harsh Mistress from 1966. Given the popularity of that work, the idea of orbital bombardment entered more of the minds of sci-fi creators. It also helped that during the Arms Race and the Space Race, that Boeing was working on the rod-from-god Project: THOR.
During the 1980's, with the rise in science fiction and war gaming, and SDI; orbital bombardment became a hot topic. This fueled a number of examples in sci-fi, and one of the greatest lines fucking ever in a sci-fi film: I say we take-off and nuke the site from orbit. It's the only way to be sure. In 1986's magnum opus, ALIENS, the idea of orbital bombardment was wrapped into one of the best lines of the one of the best sci-fi movies of all time, and that triggered a number of other sci-fi creators to include orbital weapon systems, including nuclear, into their stories and creations.
This was especially true of anime and manga, as seen in Gundam and Space Cruiser Yamato, and later, Bubblegum Crisis. Today, orbital bombardment is common in science fiction works, especially in the realm of video games. When video game technology improved in the 1990's, creators could place more complex elements graphically into the game, and one of those items was orbital bombardment. Today, you can see examples in games like HALO, Mass Effect, and of course, Call of Duty: GHOSTS.


Examples: 

The Attack on the Founder Homeworld from Star Trek: DS9

There are times when I respect the storylines and plots in Star Trek, and one that left an impression on me was the 3rd season 21st episode called "The Die is Cast". In the 1995 episode, the Cardassian and Romulan intelligence services unite for a clandestine mission to orbital bombard the homeworld of the Founders, and attempt to end the threat of the Dominion to the Alpha Quadrant once and for all. A small taskforce of top-of-the-line warships from both powers arrived in the Omarian Nebula, the location of the Founders' homeworld, and the seat of power of the Domination. Also, their intelligence indicates that the Founder homeworld is the main production site of the Jem'Hadar's life-giving Ketracel White.
It was hoped that this assault on the heart of the Dominion would produce its collapse, however, the Battle of the Omerian Nebula was the result. At first, the combined fleet was able to pound the homeworld with torpedoes and directed energy fire, it seemed too easy, and that was because the Founders learned of the plan, allowed to be carried forward, and setup a trap for the combined fleet. The Founders left their world, and allowed the fleet to destroy 30% of the planet's crust, and during this moment, 150 Jem'Hadar warships descended on small attack force. It was a slaughter, and wiped out the majority of these intelligence services power and influence, allowing the Founders to have an easier time subjugating the Cardassian Union and the Romulan Star Empire.

The Fithp Invasion of Earth from Footfall
One of my favorite sci-fi novels of all time is Footfall by the dream-team of Niven and Pournelle. The elephant-like alien race, the Fithp. The Fithp are a young race from Alpha Centarui that used technology and knowledge left by another species that shared their world. The aliens construct a interstellar vessel and spend nearly a hundred years traveling to Earth in cryo. The goal is conquest and subjugation. Throughout the book, the Fithp use in-orbit lasers and kinetic bombardment to soften up Earth for the invasion or just surrender. When humanity uses nuclear weapons at the site of the Fithp invasion in Kansas, the aliens responses with dropping a massive asteroid into the Indian Ocean, nearly wiping out India, and allowing for the aliens to control the bulk of Africa. Given the popularity of the novel and that Pournelle worked on Project THOR, Footfall would influence a new generation of sci-fi creators to include some of the concepts in the novel. If you have not read it, please do so...now.
    
     

The Covenant "Glassing" from the HALO Universe
It just has to be said...the Covenant are just dicks. It is not enough for them to destroy human colonies and kill everyone there, but then they have to go and burn the world black with ship-mounted plasma artillery. The massive plasma cannons on Covenant warships are altered to allow them to project plasma in linear beams that hit the surface of a planet with vastly intense heat, alter top soil to lechatelierite, a form of silica glass. It takes the aliens days to glass an UNSC colonial world. The world suffers global environmental damage that forever alters the planetary environment and leaves the atmosphere in a state of nuclear winter. Covenant glassing operations can be conducted from orbit or even endo-atmospherically. It is believed from some footage from the end of Reach, that the future UNSC has a slow method of reversing the effects of glassing.

The Zentraedi Holocaust from the ROBOTECH Universe

In the final battle in the First ROBOTECH War, the SDF-1, the UN Spacy Forces, and the rebel Zentraedi forces under Breetai all attempt to stand up against the invasion by the Zentraedi Central Fleet, and force of 4.8 million warships. Supreme Commander Dolza fully intends to wipe out humanity, the Earth, and the inflected rebel Zentaedi for good. During the battle, the central fleet pounds Earth with laser and particle beam fire that renders the surface of the planet a wasteland, killing billions. While the central fleet was destroyed, by the SDF-1, humanity was nearly wiped out. The Zentraedi Holocaust, as it was later called, killed over 5 billion humans, and altered the course of the species for all time. Only a few million survived, along with the off-world human service-members, and the civilians of Macross.

The USAF ODIN and the Federation's LOKI Space Platforms from Call of Duty: GHOSTS
While fans and players of the Call of Duty franchise were very unhappy with the online play of Ghosts, the campaign was rather solid, and had an original "Invasion USA" storyline that involved real-world orbital kinetic bombardment by hijacked USAF "roads from god" satellites by South American forces. The ODIN Space Platforms, or Orbital Defense Initiative were satellite launcher platforms that fired  six meter long tungsten rods from orbital with great accuracy. When the Federation took control of the ODIN space station, they bombarded main cities of the United States as a prelude to their massive invasion. Only through the brave actions of USAF personnel did the full might of ODIN was avoided.
To finally end the US, the Federation takes survives elements of the ODIN space station, and creates their own space-based weapon platform, LOKI. Unlike ODIN, LOKI could be controlled by a ground based operations center, the robds were smaller allowing for them to be used in a close  fire support role, and there were more platforms, allowing the Federation to carryout further offensive operations. During the apex of Ghosts, the USAF space warfare team, LCARUS, mounted an assault on the Federation LOKI space station, and turned the Federation's weapon against them, wiping out the ground-based control center, and the Federation naval force. LOKI was destroyed by the USAF LCARUS team. ODIN and LOKI may be one of the most accurate real-world examples of space-based weapons platforms in popular media.

The Centauri Mass Driver Bombardment of Narn from the B5 Universe

During the Narn-Centauri of 2259, the superior Centauri Republic gained the upper hand, and finally arrived at the homeworld of the Narn. When the Narn refused to surrender, the Centauri did not mount an invasion of the planet, but instead used retrofitted mass drivers on their Primus class battlecrusiers to propel asteroids. This form of planetary bombardment is illegal and ban by the League of Non-aligned Worlds, but te Centauri gave zero fucks, and did it anyway. For four days, the Centauri warships bombarded the surface of Narn, and finally, the Narn government gave in and surrendered to their former masters. Narn was already a world still scarred by the Centauri strip-mining efforts during their occupation, and the pounding from space didn't help. For over a year, Narn was a world under a nuclear winter, and it would take over ten years with the help of Minbari atmospheric processors to clean most of the air.

Here is the dialog from the episode:

Londo Mollari: Refa, any force attempting to invade Narn would be up to its neck in blood—its own!

Lord Refa: We have no intention of invading Narn. Flattening it, yes—but invading it? We will be using mass drivers. By the time we are done their cities will be in ruins, we can move in at our leisure!


Londo Mollari: Mass drivers? They have been outlawed by every civilized planet!

Orbital Bombardment from DUST 514
In the EVE Online military sci-fi shooter, DUST 514, players can call down three types of orbital strikes as fire support and even turning the tide in the online gaming arena. The first type of orbital strike is the Pulse Laser Strike that fires a high damage laser beam, but it only covers a small area. Next is the EM strike that used electro-magnetic energy blast to strike an larger area, but is a non-lethal strike, bring down shields and electronics. Lastly, there is the Hybrid Strike that combines lasers and other times of ammunition that the most devastating. Of course, giving the offensive power of the orbital strike, it is harder to achieve battlefield reward.

The Lunar Catapult from The Moon is a Harsh Mistress
Robert A. Heinlein's famous 1966 book is often praised, cited, and still read today, and does have a kick ass title...but, I've never liked it. I've read it several times to see what the fuss is all about, but much like Starship Troopers, Heinlein seems to suck the excitement and joy out of the basic plot. However, I do respect some of the themes, ideas, and of course, TANSTAAFL. In 2075, Lunar colonies are populated by the unwanted of Terran society, and computer technician Manuel Garcia befriends the Lunar colony computer system, HOLMES-IV. Due to Earth's demands, and the limited resources on the Lunar colonies, the export of wheat from Luna to Terra must be stopped, or less the Lunar colonies will descent into madness and cannibalism. Lovely. The computer, Manuel, and others in the Lunar liberation movement use the catapult launcher system to throw large lunar rocks at unpopulated areas of Earth, resulting in kinetic bombardment terrorism. The effort is successful, and Lunar becomes a free republic. Some falsely believe that The Moon is a Harsh Mistress to be the first real example of orbital bombardment in sci-fi, however E.E. "Doc" Smith takes that cake.   

The Xindi Probe Attack from Star Trek: Enterprise "The Expanse"
In the opening to the 3rd Season of much maligned Star Trek series Enterprise, the Xindi use an sphere-shaped weapons probe to test the design for their "super-weapon" that was designed to destroy the Earth. This one-man probe was a scaled-down prototype of the larger planet-killer particle cannon, and was designed to real-world test the weapon against conditions on Earth. While smaller, this particle beam sliced a canyon from Florida to Venezuela, killing seven million. This fuels the Federation and the Earth Military to rearm the NX-01, and sent on a hunt for the Xindi.


The USSD Particle Satellites from Bubblegun Crisis: 2033
The United Nations Strategic Space Defense Force of USSD is a branch of the United Nations has a network of  200 of these Kill-Sats, the VA-61 that are constructed around a particle beam emitter that has the destructive power to scar 100,000 miles. The role of the USDD is to enforce global peace, but some have been able to hack into the satillites, and use them for their own purposes, namely the evil megacorporation of Genom. Genom helped developed the "killer doll" Boomer project for the USSD, as a ground-to-space link to help target their kill-sats on more of a pinpoint target.

The Slug's Rod Attacks from Orphanage by Robet Buettner
In the excellent first novel by author Robert Buettner, Orphanage, the world had moved away from war, until the kinetic rods began dropping onto the Earth from Joviah moon of Ganymede. These aliens, called Slugs, are an advanced alien race very different from mankind, and their goal is to soften up Earth by using massive kinetic manned rods from Ganyeme. Earth quickly becomes a mess, cities are gone, economies are a wreck, and there are orphans...lots of orphans. Some rods are intercepted by armed space shuttles, but most get through. Earth is near collapse, and a despite plan is put into action, orphan-soldiers using old equipment and a advanced warship travel to Ganymede and assault the Slugs at their homebase. The destruction of the Earth by the alien rod attacks are nice touch and how it effects all levels of society. If you have not read Orphanage by Robert Buettner, than do so. This one great military science fiction book!





The Hammer of the Dawn from the Gears of War Universe
One of the more famous orbital bombardment systems in modern video games is the Hammer of the Dawn. The Dawn is an Imusion-powered laser DEW platform, developed by the COG during the Pendulum Wars, prior to the Locust invasion. During the Locust Wars, the Hammer of the Dawn became key to supporting COG missions and was used to destroy much of the surface of Sera. While the Dawn was extremely effective, it also took forever to boot up, and it was out of range more than it was in range. The games never make mention on how many Hammer of the Dawn satellites there are, but by the 3rd Gears of War game, the Dawn Kill-Sats were breaking down and taxed by overuse.

The AEGIS Orbital Defense Platforms from Babylon 5 "Endgame"
In the final showdown between the forces loyal to dickhead President Clark and B5's liberation force, Clark was losing and decided to turn the planetary defense grid of orbital weapons platforms called AEGIS back onto Earth. AEGIS platforms were equiped with missiles and heavy-duty particle cannons that could level wide areas of the surface. The liberation fleet destroys the AEGIS platforms and saves 40% of Earth's population from certain death. The AEGIS defense grid is rebuilt just in time for the Drakh attack on Earth in 2266.

The SOL Weapon Platforms from Akira
In the landmark manga and anime work Akira, there is an directed-energy orbital weapons platform called SOL or Satellite Orbital Laser. This large orbital weapons platform was developed by the Japanese for World War III. This was seen in the anime, and the American laser satellite called FLOYD was seen in the manga. During the end battle between Tetuso and the whole of Neo-Tokyo, the SOL is used for an attempted assassination of Tetuso, and the SOL first projects a aiming beam that focuses to an DEW beam of some power.  The SOL was destroyed by Tetuso in the Akira anime. Given the number of the SOL platform seen in Akira, 740, there is a possibility of more SOLs.

The Alien Relativistic Missiles from The Killing Star
One of the saddest books about alien contact is 1995's The Killing Star. A swarm of relativistic missiles from an alien intelligence hit Earth hard, killing the bulk of humanity in the first strike that rates as an extinction level event. Only because a few humans were off-world, could complete extinction be avoided, plus the aliens' took one male and one female human for their zoo, and the squid-like aliens tell the humans that once humanity was about to master relativistic travel, than they were a threat to them. The concepts in the novel are hard science fiction and this book rates among my favorites. It is such a sad story though.













Imperial of Man's "Exterminates" from WH40K
There several methods that are used by the Imperial Navy to attack and overwhelmingly assault the surface of a planet. This order is called "Exterminates", and the shipboard weaponry of the Imperial warship can be used, along with virus bombs and cyclonic tropodes. Few sci-fi works have ever shown the level of death assoicated with orbital bombardment than WH40K.  Exterminates is used through the various WH40K media, from books, video games, and the RPG. I became aware of orbital bombardment from the older PS2 WH40K video game Fire Warrior.

The Nerve Gas Orbital Modules from Moonraker
In the outlandish bat-shit crazy 1979 Bond film Moonraker, humanity was nearly wiped out by evildoer Drax and his nerve gas orbital bombardment. In the film, evil genius Drax of Drax Industries plans on wiping out all life on Terra by using nerve gas orbital module deployed from his space habitat station. Once human life is gone, Drax and his handpicked colonies will reseed Earth and Drax will become supreme ruler of the new human race. Of course, James Bond and Holly Goodhead take to an orange and white space shuttle and stop his evil plans. It is believed that Call of Duty: Ghosts used some of Moonraker for their own orbital space combat scenes. This marks on of the few times FWS as ever talked about James Bond, despite me being a huge fan of the Bond films.

HERCULES and PETER the GREAT from Meteor (1979)
In the much panned 1979 disaster film, a massive asteroid is headed to Earth that will produce an extinction level event, and there seems to be little to stop it. But wait! The United States and the USSR both have secret nuclear weapon platforms that completely volatile the Outer Space Treaty. In the film, Sean Connery was the developer of the American HERCULES weapon platform, he is brought on to help with redirecting the asteroid from hitting the Earth and killing everyone. The Soviets have the PETER the GREAT nuclear weapon platform. 
Hasil gambar untuk Transmission on weapons 

Hasil gambar untuk Transmission on weapons 

Hasil gambar untuk Transmission on weapons Gambar terkait

 Hasil gambar untuk Transmission on weapons 

Hasil gambar untuk Transmission on weapons  Hasil gambar untuk Transmission on weapons



   
Hasil gambar untuk Transmission on weapons 
Gambar terkait  Hasil gambar untuk Transmission on weapons


Hasil gambar untuk Transmission on weapons