Senin, 27 Maret 2017

Laser - based communications technology and Laser Transmission system so do Space Communication Switch to laser beam


                            
                                                little concept of laser communications

                         HALO SpaceCable OSS
                                                             Photo: Laser Light.

Technological developments have shown a significant increase, especially in the area of ​​communication. This is evidenced by the many communications media be it wireless or wired. In this study used light as a medium of communication systems, in addition to the function of light as illumination. In this study realized prototype laser communications system that utilizes light function from the Laser to become a communications system. Prototype laser communications system consists of a transmitter and receiver. The transmitter consists of a laser, audio transformer and batteries. While the receiver consists of a photo diode, amplifier and power supply. The method used in the measurement is a method Line of Sight (LOS) in open channels and closed conduits. The parameters that can affect the results output communication system is within and outside light, because the farther the distance, the smaller the intensity of laser light received receiver.



           Hasil gambar untuk gambar rangkaian komunikasi laser

                                                                      X  .  I  
                                          Space Communication Switch to laser beam 


  NASA
The laser beam, the light beam converged once considered unsuitable for long-distance communications, the likelihood is the best way to send large amounts of data in space.Scientists at the US National Institute of Standards and Technology and the Jet Propulsion Laboratory - NASA says it has developed a series of small superconducting light sensor is sensitive enough to detect the smallest particles of light - measuring one photon. In fact, the chip can detect the position - left or right, up or down - from every photon that goes into the sensor circuit.Light signals can be coded based on the position of each photon, and also based on the time interval when it is emitted. The researchers say this allows the transfer of volumes of information in a very large number, faster and less costly than using radio - which is currently used for data communication in space.The researchers say the sensors can absorb the data of tens of millions of photons per second, and they expect future versions will be able to process one billion photons per second.In recent trials, scientists use a series of laser sensors to exchange data with NASA spacecraft orbiting the moon six times faster than the best existing radio communications. The researchers said the laser system that weighs half of a radio device and its function is comparable, and use 25 percent less energy. 


                                        


Space laser communication is a use of lasers for telecommunications in space. This is an application of laser communication and visible light communication.
          Hasil gambar untuk gambar rangkaian komunikasi laser 


                           NASA Kembangkan Laser untuk Komunikasi Antarplanet




                                                                       X  .  II 
                                                           bright cloud on LASER  

                                            Theodore Maiman laser inventor

The person who first makes the laser is a physicist called Theodore Maiman in 1960 Maiman using pomegranate-synthetic crystals to create the first laser.Maiman first tinkering with electronic devices in adolescence and even get money to repair the equipment and college radio. He worked at Hughes Research Laboratories air reputable Hughes in Malibu, California, when he built the first working laser.Maiman was nominated twice for the Nobel Prize, but did not win it. He received many other awards before his death in 2007 at the age of 79 years.Lasers are devices which produce coherent light (all lanes in stages) monochromatic (all the same wavelength). Today it is used in eye surgery, dental doctoral, search-range, astronomical measurements, coil (welding) and other refinery use.You will meet them on a scientific instrument, a series of communications, weapons, music system (such as a CD player) and bar code (scanner) supermarket. Lasers are everywhere.  

    

                              


Some guys have all the luck.  September 18 marked the first ever International Observe the Moon Night (which is referred to as InOMN) which is set to become an annual event.  Visitors at the NASA Goddard Visitor Center in Maryland were in for a treat.




The object they were seeking was the Lunar Reconnaissance Orbiter.   The lasers fire twenty eight times a second and travels a quarter of a million miles.  The L R O is itself moving at 3,600 miles per hour as it proceeds on its orbit around the moon and it is only the size of a minivan. This is an artist's impression of what they were after.
                                                                     X  .  III
                                                   LASER Diode - How it Works 

 Laser is very important in optical memories, optical fiber communications, military applications, surgical procedures, a CD player, etc. Various forms of laser printers such as Gallium arsenide laser, Helium Neon laser, carbon dioxide laser, etc. are used in various applications. CD player uses laser technology to read the optical data are recorded in Bits and Pits on CD.

Laser is a narrow beam of photons emitted by the diode laser specially made. Diode lasers are similar to regular LEDs, but produce high intensity light beam. A laser is a device in which the number of atoms vibrate to produce a beam of radiation in which all waves have a single wavelength and are in phase with each other. 


 laser monochromatic  

 sinar laser 

Monochromatic laser beam and pencil beam can be focused as a typical laser beam has a 4 × 0.6mm widening at a distance of 15 meters. Such as LEDs, laser diodes convert electrical energy into light energy. 

                                 senjata laser

Ways of working?
The most common semiconductor laser diode produces laser or injection. In this laser, the population inversion of electrons produced by applying a voltage across the p - n her. The laser beam is then provided on the semiconductor region. The pn junction of the laser diode has polished ends so, the emitted photon reflecting back and forth and create more electron-hole pairs. Photons produced will be in phase with the photons before. It will provide Pencil Beam and all the photons in the beam are coherent and in phase. 


                                emisi laser   

Laser applications
Laser diodes can be switched on and off at a frequency as high as 1GHz, making them ideal in telecommunication applications. Because the laser which produces heat in the tissues of the body hit, it is the ideal solution to cure sensitive parts such as eyes and brain Retina. Lasers can be used to determine the lesion so that the surrounding tissue is not affected as in the case of the operation.
 

Diode Laser  

                                                 dioda laser 

A bright cloud Attention
Laser is a high-intensity beam penetrates and is very dangerous when focused on the eye. Laser pointer low cost is now available in the market and some people handle them careless and even can give to children to play with. A laser pointer with a higher output power of 5 m W dangerous. Take caution when handling laser diodes. Always take precautionary measures while trouble shooting CD players, laser printers, etc.  


                                       Hasil gambar untuk gambar rangkaian komunikasi laser

                                                                    X  .  IIII
                                                    Smallest Semiconductor Laser  

 
Researchers at the University of California, Berkeley, has gained a milestone in laser physics by creating the world's smallest semiconductor laser and capable of generating visible light in space instead of a single protein molecule. this makes new ground in the field of optics. The UC Berkeley team not only successfully suppress light in a narrow rung, but also find new ways to maintain the light energy from its burst while moving, thereby obtaining the laser action. "This work solves the traditional allegations of laser limits, and makes a large share of applications in the biomedical, communications and computers, Achieving this would help develop an innovation such as nano lasers that can probe, manipulate and characteristic schematic molecule - DNA molecule; optics-based communications several times faster than current technology; and an optical computer in which light replaces electronic circuitry adjusts to the speed leaps and processing power.While it is traditionally acceptable as like as an electromagnetic wave - including laser light - can not be focused beyond the size of half a wavelength, a team of researchers around the world have found a way to compress light under dozens of nano meters to incorporate them in the electrons - electrons which collectively move to and fro on the metal surface. The interaction between light and electrons - electrons move known as surface plasmons.Scientists have been racing - race to construct surface plasmon lasers that can survive and use the optical excitation is very small. However, the nature of resistance However, the metal causes the surface plasmons are scattered almost immediately after the result and have a critical challenge in obtaining enhancer of the electromagnetic field necessary for to be LASER . the researchers took a novel approach to stem the loss of light energy with a pair of cadmium sulfide nano wire - 1,000 times smaller than a human hair - with a silver surface separated by a delimiter gap of only 5 nano meters, the size of a single protein molecule. In this structure, the gap region stores light within an area 20 times smaller than the wavelength. Because light energy is largely stored in non-metallic gap is small, her loss can significantly be reduced. By the end of the loss under supervision until this uniqueness, the design of "hybrid", the researchers can then work on to be amplification of  light. "When you work on a small scale, you do not have much space to play - play". "In our design, the nano wire acts as both capping mechanism and an amplifier. This requires double work. "Trapping and support of light in a small space creates an extreme situation in which the interaction of light and the material is very strong change, the author's description of the study. An increase in the spontaneous emission rate of light is a sign pointer from changing this interaction; in this study, the researchers estimate a sixfold increase in the spontaneous emission rate of light in a gap size of 5 nano meters. 


New - Recently, researchers from Norfolk State University reported that the actions LASER gold field in a dye-filled, kind of framework of glass embedded on a solution. Double-dyed gold fields could generate surface plasmons when exposed to light.

The UC Berkeley researchers used semiconductor materials and fabrication technologies that are commonly employed in modern electronics manufacturing. By engineering hybrid surface plasmons in the gap between the semiconductor and the metal, they are able to withstand quite a strong light is limited in that its oscillations stabilized into the coherent state that is key on the characteristics of a laser.

"What is particularly exciting about the plasmonic lasers we demonstrated here is that they are solid and highly compatible with semiconductor manufacturing, and then they can be electrically pumped and fully integrated at chip-scale,"  



"Plasmon lasers represent a class of activists from the source - the source of coherent light that is capable of the very small restriction in the extreme," said Zhang. "This work can bridge the worlds of electronics and optics on the length scale of the real molecular

Scientists eventually hope to shrink the size of the wavelength of light on the electron, which is about a nano meter, or a billionth of a meter, so that both can work together - together on equal footing.

"The advantage optic - optic in the field of electronics is very much," 



"An example, the equipment will be more powerful and efficient at the same time they give rise speed or bandwidth."  



                                                                           X  .  IIIII  

                                 some examples of how the series of laser communication in daily life 


           Hasil gambar untuk gambar rangkaian komunikasi laser
                                        Gambar terkait



                                 Hasil gambar untuk gambar rangkaian komunikasi laser


                               Hasil gambar untuk gambar rangkaian komunikasi laser


LASER (abbreviation of the English language: Light Amplification by Stimulated Emission of Radiation)Lasers amplify light. Laser beams of light that can take the weak and make it a powerful beam. Some laser beam produces a very strong so it can burn a small hole in a piece of iron in less than one second.The laser beam can reach long distances through space without spreading and becoming weaker. Therefore, the laser beam into an important communication tool in communicating in an era of outer space. Many uses lasers are found in medicine, science, and industry.Scientists regard the light as a wave moving. The distance from the skin to the skin following a wave of so-called wavelength. Light from the sun or from a lamp is a mixture of many wavelengths. Each different wavelengths produce different colors.The laser beam is made of light that are all composed of the same wavelength. Light beam in ordinary light to flow in a different direction. The laser beam moves in exactly the same direction. The laser beam is not spread out and not weakened  


                        

At the beginning of its development, people do not mention the name of the laser. Experts call this time as a maser (Microwave Amplification by the Stimulated Emission of Radiation. And the so-called first revealed masers are Albert Einstein between 1916 - 1917. The famous eccentric scientist who is also the first time found a light or rays not only consists of electromagnetic waves, but also charged particles and energy. and the unknown was what is referred to as radiation. but maser of Einstein is merely a theory. Technology in the second decade of the 20th century has not been able to make it happen. in addition, many scientists who consider Einstein's theory of a controversial theory.In the following years, especially during the second world war, the maser is more widely used for military purposes, namely for the development of radar. Until finally Charles H. Townes, James Gordon and Herbert Zeiger, managed to make maser using ammonia gas. And this is the maser was first created. The success was published in 1954. It is a maser with an energy level. Furthermore, the idea of ​​two levels to maintain emissions at maser inversion has been developed by two Soviet scientists, Nikolai Basov and Alexander Prokhorov. Because this very important contribution in the development of the maser, Charles H. Townes, Nikolai Basov and Alexander Prokhorov shared the Nobel Prize in Physics in 1964.Charles H. Townes indeed anyone who plays an important role in the world maser. Previously he shared Arthur Schawlow have explored the possibility of making an optical maser (which later evolved into the laser) and infrared rays. Details of the study were published in December 1958. But they were still having trouble and manufacture laser (optical maser). Until the end before entering the 1960 Theodore Maiman can realize a laser beam work. Maiman using Ruby stone cylinder to trigger laser until the laser homemade known as Ruby Laser. But Ruby Laser energy is only able to work on the third level. After entering 1960, Peter Sorokin and Mirek Stevenson began developing the first four-level laser. But it was still a theory and purpose to realize it still has not been reached. However, since it was the laser era began.At first glance that Theodore Maiman considered as the first person to successfully make the laser (not maser). But actually there are others that have preceded it, namely Gordon Gould. In 1958, Gordon Gould reportedly has succeeded in making optical maser (laser) and even he is also regarded as the person who first used the term Laser (Light Amplification by the Stimulated Emission of Radiation). But Gordon failed to register its laser patent in 1959. Until 1977, Gordon won the patent. It took eight years to get recognition.At about the same time are also a few other scientists managed to make a laser using different materials. For example Ali Javan, William Bennett and Donald Herriot makes laser with helium and neon gas media in 1960 and recently published his success in 1961. Kumar N. Patel makes laser through carbon dioxide, nitrogen, and helium in 1964. And in the year the same is also (1964), Earl Bell makes laser with the help of helium and mercury. Scientists have considered maker for gas lasers because of the materials they use to make the laser is generally a gaseous substance.Fairly important developments occurred in 1962 when a scientist working on a General Electric company, Robert Hall, find the mini-sized semiconductor laser with a low cost. Usually machines or equipment-producing large-sized laser beam. Laser-made Rober Hall is that up to now used on the VCD and DVD players, laser printers, bar code readers, drives the CPU, communication systems using optical fibers, and so forth.A revolutionary discovery made in 1970 when Charles Kao and George Hockham managed to create what is now called optical fibers (fiberglass). They both did not make a laser, but its discovery is very important in the use of laser applications. And as we know, are widely used in fiber optic communication field. The areas that is regarded as the largest user of laser applications. Laser and fiber optics is two discoveries were very mutually supportive. 


There are various types of lasers. Laser medium can be a solid, gas, liquid or semiconductors. Laser is usually determined by the type of material used by the amplifierSolid-state laser material has been corroborated distributed in a solid matrix (such as ruby ​​or neodymium: yttrium-aluminum garnet laser yag). Neodymium-Yag laser emits infrared light at 1064 nano meters (nm).Gas laser (helium and helium-neon, HeNe, is the most common gas lasers) has a main output of an infrared lamp. CO2 lasers emit infrared energy offing, and is used for cutting hard materials.Excimer lasers (the name is derived from the terms excited and dimers) use reactive gases, such as chlorine and fluorine, mixed with inert gases such as argon, krypton or xenon. When electrically stimulated, a pseudo molecule (dimer). When lased, the dimer produces light in the ultraviolet range.Dye lasers use complex organic dyes, such as rhodamine 6G, in liquid solution or suspension as the amplifier medium.Semiconductor lasers, sometimes called diode lasers, lasers that are not solid-state. Electronic devices that use is generally very small and use low power. They can be built into a larger array, such as the writing source in some laser printers or CD player.  


                 

In everyday life, the laser is used in various fields. In use, the laser energy emitted per unit time is expressed by the order of a few mW (laser block, used in laser disc audio system) up to several MW (Laser used for weapons). The amount of laser energy that is selected depending on its use. Utilization of the laser beam, for example in the fields of medicine, services (services), industrial, astronomy, photography, electronics, and communications.In the field of medicine and health, a laser beam is used among others to diagnose the disease, disease treatment, and repair a defect and surgery.In the industrial field, the laser beam is useful for welding, cutting steel plate, as well as for drilling.In the field of astronomy, high-power laser beam can be used to measure the distance of Earth Month carefully.In the field of photography, lasers capable of producing three-dimensional image of an object, called holography.In the field of electronics, small-sized solid state lasers used in optical memory storage system in a computer.In the field of communications, laser serves to amplify the light that can deliver voice and image signals through optical fibers.  


  



                                                                     X  .  IIIIII
                                                             Fiber Optic Technology  


Fiber optics is a pure glass that is long and thin and the diameter of a human hair. And in its use multiple fiber optic put together in a place called optical cables and used to deliver digital data in the form of light in a very far distance


Core is a thin glass that is a core part of the fiber optic beam delivery which do.
Cladding material surrounding the core is functioning reflects the light back into the core (core).
Buffer Coating is a plastic coating that protects the fiber from damage. 



1. Single-mode fibers
core optical fiber with extremely small (0.00035 inch diameter or 9 micron). diameter approaching the wavelength so that the light that goes into it is not reflected-reflective wall cladding.

Fiber Optic Transceiver 






2. Multi-mode fibers
optical fiber with a core diameter rather large (diameter of 0.0025 inch or 62.5 microns) were made in it will bounce laser-reflective wall cladding which can lead to reduced bandwidth of the optical fiber type. 




How Fiber Optics Work
Early signal in the form of electrical signals at the transmitter is converted by the transducer opto electronic (Diode / Laser Diodes) into light waves are then transmitted via fiber optic cable to the receiver / receiver located at the other end, the receiver / receiver optical signal was converted back into electrical signals by transducer Opto electronics (Photo Diodes / Avalanche Photo diode).
But in the course of the optical signal from the transmitter to the receiver so that the light attenuation would occur if the transmission distance is far then needed a repeater to amplify the signal back.  








Indoor/Outdoor Tight Buffer


Indoor/Outdoor Breakout Cable


Aerial Cable/Self-Supporting


Hybrid & Composite Cable

Armored Cable

Low Smoke Zero Halogen (LSZH)


outer sheath
In the color coding standardization of outer sheath (jacket) of fiber optic cables Patch Cord types are as follows:
Color
Yellow single-mode optical fiber
Oren multi-mode optical fiber
Aqua Optimal laser micrometer 10 giga 50/125 multi-mode optical fiber
Grey color code optical fiber multi-mode, which is not used anymore
Blue Sometimes they are used in the design model

connectors
Fiber optic cable, the connection terminal ends or also called connectors, usually have a standard type such as FC, SC, ST, LC, or MTRJ. In addition to the connectors typically use a specific color with the intention as follows:
Color
Blue being the most commonly used mainly for single-mode optical fiber.
Green is no longer used for multi-mode optical fiber
Black -
Grey, Beige multi-mode optical fiber
white -
Red Special Use  




             Hasil gambar untuk gambar rangkaian komunikasi laser  Hasil gambar untuk gambar rangkaian komunikasi laser




                                                                   X  .  IIIIIIII  
 
                                                 LASER TRANSMISSION SYSTEM  


LASER TRANSMISSION SYSTEM


         
Understanding communication with the light, is not new at all, because since hundreds of years ago, people have found ways to talk remotely using light. In human history, known usage burning torch for the most effective communication tool. Heliogaf gleaming mirrors reflect sunlight so far in high  kilo meters is a communication tool that is not a small role. Lighthouse built-island remote island middle of the ocean, is clearly the most important communication tool for the ship that was sailing across the ocean.
         
The more rapid development of human life also increase the need for the use of telecommunication services from year to year tend to be beyond the capabilities of existing channels.
         
To accommodate these needs, the world of telecommunications equip its network with a laser beam. With giant channel ability that goes far beyond the needs. A beam of laser light will be able to provide a number of channels to accommodate all types of telecommunications around the globe.
         
Laser is essentially an oscillator that operates at a frequency of light, the laser only serves as an energy provider of electron flow in the electron tube as usual. As the name implies LASER (Light Amplification by Simulated Emission of Radiation hardening of light by stimulated emission of radiation), Laser stimulates piled radiant energy in the atom itself.
         
Lasers can form crystals, gas, liquid, and semiconductor each have their own characteristics with a particular user. The crystal type screen, for example, is a kind of stone, ruby ​​red (ruby) can operate at very steeper output power in mega watt (MW). Laser types of gas and liquid form requires low power supply of 10 to 20 watts
         
Laser gases and crystals as the main supporter of the laser system that is widely used in various purposes. Given the quality of the laser is so high, its use is increasingly up especially in the fields of industry biology , physics, optics and communication. This quality is based on its ability output to coherent beam (solid blend with the same properties). This is precisely what is especially attractive communication experts who want to get a new transmission media for improved distribution of information on a large scale. 



transmitterTransmitter consists of 2 parts:

    
Electrical circuit serves to convert digital signals into analog signals, then the data is superimposed into optical signals that have been modulated wave
    
Sources of optical waves in the form of rays Laser Diode (LD) and LED ( light emmiting diode) that is adapted to the use of communication necessary.

    
Laser Diode can be used for optical communication systems are very much like the Cable Communication System (SKKL) and Systems Optical Fiber Communication (SKSO), because the laser LD has characteristics that are reliable that can transmit power with high intensity, stable, almost monochromatic, focused , and spread at breakneck speed, so it can be a great distance. Its manufacture is very difficult because it requires certain specifications so that the price is expensive. So LD uneconomical and inefficient when used for short range communications system and the traffic less congested.
    
LEDs are used for medium-range communication systems and close so that the system can be an economical and effective because it is easier to make its . LED, so the price is cheaper. LED components necessary to analyze a network that is the emission wavelength, spectral line width, power output, area effective radiation, emision spectrum, and the number of emitting modes.
    
Can be illustrated the transfer characteristics of LD and LED with analyze it is that once a certain price is exceeded, with the same input turns LD output power is far greater than the LED. 




Transmission characteristics
The nature of information transmission can be explained as follows:

     The information will be transmitted in the form of data in digital form, while the form of the carrier signal carrier will pass through optical fiber transmission medium in the form of analog signals.
     It is necessary for modulation and demodulation process is a process that converts digital data into analog and also the reverse process by using a modem with its appliances.
     In this type of optical fiber used as the transmission medium is a graded index multi mode optical fiber.

 Laser Beam Systems 


Communication technology is widely used laser light to places far away. Communications experts predict, the future use of laser technology will be expanded and will reduce the cost transmission . but Thus, this technology also has the property line of sight, so if obstructed, then the flow of data and information will be stalled.In the future, this technology will be used by companies that have a building area so media transmission used to connect between building one for the other building systems use laser light.
    
Laser light
         
In general, the light we see is a mixture of different wavelengths, or colors are different. Because the atoms are usually issued randomly light, the light waves generated is also not in unison. Two of these factors mean that the ordinary light is a mixture of different types of waves. However, the laser light is different. The laser light does not contain a lot of waves, but only one wavelength. Not only that, the wave-propagation also "coherent", which means that the waves were exactly or rhythm. The laser light is made by filling a solid, liquid, or gas with energy. When an energy-absorbing elements, the atoms begin to release the light at specific wavelengths. If the light from one atom of the atoms of adjacent edges, more light at liberated. This chain reaction continues until many atoms emit light, all at the same time. If the light reflected by the mirrors specifically so that the light was moving backward and forward in the laser over time, the light becomes so intense that a portion of it through one of the mirrors and laser beam shaping.
    
At  Laser Beam TransmissionLASER stands for Light Amplification by Stimulated Emission of Radiation. Lasers can produce coherent light and high intensity. The laser beam can be deflected by using optical devices such as mirrors, prisms, and lenses. The transmission medium is a medium that can be used to transmit information from one place to another. In the network, all media that can channel electricity or electromagnetic waves or light, can be used as a media sender, both for sending and receiving data. The components are selected to meet a network analysis on a diode laser that is the emission wavelength, spectral line width, power output, the effective radiation area, emission spectra, and the number of emitting modes. 
Transmission at Prism

Point the laser pointer to one side of the upright on the prism 


Prisma is a clear substance that is bounded by two flat areas. When a beam of dating on one of the fields referred to as field refracting prism I, will be refracted approaching normal line. Until the field of refractory II, the light beam will be refracted away from the normal line. In the field of refractory I, rays refracted approaching normal lines, for dating beam from substance to substance less dense optic optic is more dense air into the glass. In contrast in the field of refractory II, the beam is refracted away from the normal, because the light comes from substance to substance optic optic meeting that is less dense than glass into the air. So that a beam of light passing through a prism will experience a deflection direction from its original direction.
         
Laser light properties including to monochromatic. When the laser beam is imposed on the prism, the laser beam will be refracted by the spread in only one direction. While on the other light rays when worn on the prism will experience light dispersion, which decomposes white light into a rainbow of colors like red, orange, yellow, green, blue, indigo and violet, called poly chromatic light.

 
Transmission in the mirrorTo control the light emission of the laser beam, then can be used help of a mirror. Where two mirrors are placed at both ends of a crystal or rubies and one of them made half - silvered (just reflect some light , while light that is not reflected can bust out. Stone ruby ​​stimulated energy (irradiated with light) so that some of the excited electrons . Then the excited electron is trying to energy levels beginning with the release of light (photons). the light is bounced on the surface of the mirror and irradiate the electrons beside causing for excitation at of the electron. Some of the light managed to bust out of the half - silvere mirror. rays a beam of monochromatic, coherent and singular. mirror causing losses in transmission due to diffraction mirror can extend the reflectance of light, where two flat mirrors should be located in parallel and aligned so very accurately to avoid the rays leave the middle of the mirror. 


Transmission On Lenses
The lens on the laser beam is useful for focusing the light reflected by the mirror. Two identical lenses that are used to make beams in laser to diversion will spread. Lenses must keep both light devices remain in one phase, in other words exactly in unison or in tune. Laser light beam will split. Files that highlights objects molecule then a lens and is reflected towards it. Reference light beam passing through a lens and can be reflected toward the emulsion photographs and there was met with the reference light from the light highlighting objects . 



Selasa, 21 Maret 2017

Electronic Warfare in space and energy * AMNIMARJESLOW AL DO FOUR DO AL ONE LJBUSAF thankyume orbit





EW-Hero

 Electronic Warfare (EW) represents the ability to use the electromagnetic spectrum—signals such as radio, infrared or radar—to sense, protect, and communicate. At the same time, it can be used to deny adversaries the ability to either disrupt or use these signals.  


Electronic Warfare  is divided into three ( III ) major areas :   

I . Electronic Attack 
II. Electronic Protection 
III . Electronic Support  


                                                                          X  .  I  
                                                        Electronic  ATTACK  


                                     What the Arrowverse Crossover Ratings Tell Us


Electronic attack ( EA ) is the discipline of attacking an adversary’s access to the electromagnetic spectrum. Individual EA topics include: • RADAR Electronic Attack (EA) vs. Communications Electronic Attack (EA)
• The Jamming System
• Polarization
• Jammer RF Spot Size
• Noise vs. False Targets
• Range


Division of electronic warfare involving the use of electromagnetic energy, directed energy, or anti radiation weapons to attack personnel, facilities, or equipment with the intent of degrading, neutralizing, or destroying enemy combat capability and is considered a form of fires .

electronic attack (EA) is  ivision of electronic warfare involving the use of electromagnetic energy, directed energy, or antiradiation weapons to attack personnel, facilities, or equipment with the intent of degrading, neutralizing, or destroying enemy combat capability and is considered a form of fires .

An electronic attack, most commonly referred to as an electromagnetic pulse (EMP), disrupts the reliability of electronic equipment through generating instantaneous high energy that overloads circuit boards, transistors, and other electronics. EMP effects can penetrate computer facility walls where they can erase electronic memory, upset software, or permanently disable all electronic components.

An electronic attack includes —
Common types of electronic attack include spot, barrage, and sweep electromagnetic jamming.
Electronic attack actions also include various electromagnetic deception techniques such as false target or duplicate target generation.
Activities related to electronic attack are either offensive or defensive and include —
Some assert that little has been done by the private sector to protect against the threat from electromagnetic pulse, and that commercial electronic systems in the United States could be severely damaged by limited range, small-scale, or portable electromagnetic pulse devices. Some military experts have stated that the United States is perhaps the nation most vulnerable to electromagnetic pulse attack.

Offensive electronic attack

Offensive electronic attack activities "are generally conducted at the request and onset of friendly force engagement of the enemy. In many cases, these activities suppress a threat for only a limited period of time."
Examples of offensive electronic attacks include —

Defensive electronic attack 

uses the electromagnetic spectrum to protect personnel, facilities, capabilities, and equipment. Examples include self-protection and other protection measures such as use of expendables (flares and active decoys), jammers, towed decoys, directed-energy infrared countermeasure systems, and counter-radio-controlled improvised-explosive-device systems . 


                                                                        X  .  II  

                                                        Electronic counter measures  



                         Destiny 


Electronic countermeasures (ECM) are division of electronic warfare involving actions taken to prevent or reduce an enemy's effective use of the electromagnetic spectrum through the use of electromagnetic energy .  


Overview

There are three subdivisions of electronic countermeasures :
electronic jamming, electronic deception and electronic neutralization.
It may be used both offensively and defensively to deny targeting information to an enemy. The system may make many separate targets appear to the enemy, or make the real target appear to disappear or move about randomly. It is used effectively to protect aircraft from guided missiles.
Most air forces use ECM to protect their aircraft from attack. It has also been deployed by military ships and recently on some advanced tanks to fool laser/IR guided missiles. It is frequently coupled with stealth advances so that the ECM systems have an easier job. Offensive ECM often takes the form of jamming. Defensive ECM includes using blip enhancement and jamming of missile terminal homers.



                                                                   X  .  III

                           Electromagnetic jamming  



              Lockheed Martin’s Latest Counter-IED System to Support Partner Nations 

Symphony Block 40 is able to defeat current and emerging improvised explosive device (IED) threats and is designed to protect warfighters in an unpredictable battlespace. Photo from Lockheed Martin.

Electromagnetic jamming is he deliberate radiation, reradiation, or reflection of electromagnetic energy for the purpose of preventing or reducing an enemy’s effective use of the electromagnetic spectrum, and with the intent of degrading or neutralizing the enemy’s combat capability . 


Electromagnetic radiation is a ubiquitous phenomenon that takes the form of self-propagating waves in a vacuum or in matter. It consists of electric and magnetic field components which oscillate in phase perpendicular to each other and perpendicular to the direction of energy propagation. radiation made up of oscillating electric and magnetic fields and propagated with the speed of light. Includes gamma radiation, X-rays, ultraviolet, visible, and infrared radiation, and radar and radio waves . 

Overview  

Electromagnetic radiation is classified into several types according to the frequency of its wave; these types include (in order of increasing frequency and decreasing wavelength): radio waves, microwaves, terahertz radiation, infrared radiation, visible light, ultraviolet radiation, X-rays and gamma rays. A small and somewhat variable window of frequencies is sensed by the eyes of various organisms; this is what we call the visible spectrum, or light.  


The electromagnetic environnement (EME) is "the totality of electromagnetic phenomena existing at a given location :  the resulting product of the power and time distribution, in various frequency ranges, of the radiated or conducted electromagnetic emission levels that may be encountered by a military force, system, or platform when performing its assigned mission in its intended operational environment. It is the sum of the electromagnetic interference; electromagnetic pulse; hazards of electromagnetic radiation to personnel, ordnance, and volatile materials; and natural phenomena effects of lightning and precipitation static . 


                                                                   X  .  IIII  

                                                         Electromagnetic pulse  

               Symphony Block 40 

Symphony Block 40 is an open architecture design that incorporates cutting edge technology to address new and emerging threats. Photo from Lockheed Martin 

 
An electromagnetic pulse (EMP) is the electromagnetic radiation from a strong electronic pulse, most commonly caused by a nuclear explosion that may couple with electrical or electronic systems to produce damaging current and voltage surges .
1 or more pulses of electromagnetic energy emitted by a device capable of disabling or disrupting operation of, or destroying, electronic devices or communications networks, including hardware, software, and data, by means of such a pulse .

Impact on power grid

"Electromagnetic risks caused by a man-made electromagnetic pulse (EMP) or a naturally occurring solar weather event could have a significant impact on the nation's electric grid as well as other infrastructure sectors that depend on electricity, such as communications. The impact of these events could lead to power outages over broad geographic areas for extended durations."
"EMPs can cause voltage and current surges which can severely damage electrical equipment and systems. A high-altitude nuclear explosion could cause an EMP which could severely impair an electric power system not shielded from the effects of an EMP.

Impact on Telecommunications

"Electromagnetic pulse (EMP) attacks present a less significant direct threat to telecommunications than it does to the National Power grid, but would nevertheless disrupt or damage a functionally significant fraction of the electronic circuits in the Nation's telecommunications systems in the region exposed to EMP (which could include most of the United States). EMP attacks could damage a functionally significant portion of the Electric Power Grid, resulting in prolonged power- and synergistic system-outages."



                                                                    X  .  IIIII 
                                                              Electronic probing 

An electronic probing is intentional radiation designed to be introduced into the devices or systems of potential enemies for the purpose of learning the functions and operational capabilities of the devices or systems .  


                                                                   X  .  IIIIII  
                                                   Command and control system 

                            


A command and control system is the facilities, equipment, communications, procedures, and personnel essential to a commander for planning, directing, and controlling operations of assigned and attached forces pursuant to the missions assigned . 


                                                                 X  .  IIIIIII 
                                                          Electronic deception 


Electronic deception (ED) is the deliberate radiation, reradiation, alteration, suppression, absorption, denial, enhancement, or reflection of electromagnetic energy in a manner intended to convey misleading information and to deny valid information to an enemy or to enemy electronics-dependent weapons.
Overview
Among the types of electronic deception are:
  • Manipulative electronic deception: Actions to eliminate revealing or convey misleading, telltale indicators that may be used by hostile forces.
  • Simulative electronic deception: Actions to represent friendly notional or actual capabilities to mislead hostile forces.
  • Imitative electronic deception: The introduction of electromagnetic energy into enemy systems that imitates enemy emissions. 

                                                                X  .  IIIIIIIII 

                                                      Directed-energy weapon 

A directed-energy weapon (DEW) is a weapon or system that uses directed energy to incapacitate, damage, or destroy enemy equipment, facilities, and/or personnel . 


                  Get Lightning Fast Speed and Performance With Prodigy  

Infantry Weapons  

                         

             

Lockheed Martin has completed the design, development, and demonstration of a 60 kW-class beam combined fibre laser for the US Army. Pictured here is a rendering of the system on an FMTV. Source: Lockheed Martin 

                              

                    

               

                   

Lockheed Martin’s Latest Electronic Warfare System for Helicopters to Safeguard U.S. Navy Against Anti-Ship Missile Threats 


              Electronic Warfare System for Helicopters to Safeguard U.S. Navy 

Lockheed Martin’s Advanced Off-Board Electronic Warfare (AOEW) Active Mission Payload (AMP) AN/ALQ-248 system, a pod hosted on an MH-60R or MH-60S, will enhance the way the U.S. Navy detects and responds to anti-ship missile threats. 


                                                             X  .  IIIIIIIIII 

                                          Directed-energy protective measures 

Directed-energy protective measures is that division of directed-energy warfare involving actions taken to protect friendly equipment, facilities, and personnel to ensure friendly effective uses of the electromagnetic spectrum that are threatened by hostile directed-energy weapons and devices. 

Report of the Defense Science Board Task Force on Information Warfare-Defense (IW-D) .

This report focuses on protection of information interests of national importance through the establishment and maintenance of a credible information warfare (IW) defensive capability in several areas, including deterrence and to make recommendations regarding the creation and maintenance of specific aspects of a national information warfare defense capability.

The Task Force recommended a series of over 50 actions designed to better prepare the Department of Defense for this form of warfare beginning with identification of an accountable focal point within the Department for all IW activities and ending with the allocation or reallocation of approximately $3 billion over the next 5 years to implement these recommended actions.


Concept Capability Plan for Space Operations 2015-2024 

Space capabilities enable, and may be enabled by the conduct of CyberOps. Space capabilities are employed in the extension of, and as another transport mode for, the Army's portion of the Global Information Grid (GIG), LandWarNet, particularly in support of deployed forces. This pamphlet describes the relationship between the space and cyberspace domains.