Selasa, 03 Mei 2016

Synthetic Blood comparison with the pure blood pattern

Bloodstain pattern analysis :

Bloodstain Pattern Analysis devoted to the identification of biological material, DNA
interpretation and DNA statistical analysis,  to detect  human biologists, fingerprints , crime scene members for police record, medical examiners . 


Crime  scene  examinations  generally  are  associated  with  dwellings  or  structures.  In  reality  many
crime  scenes  involving  bloodshed  may  occur  outside  including  wilderness  environments.  While
examination within a dwelling may take significant time to process, it will not degrade dramatically
as  the  surrounding  structure  provides  protection.  In  contrast,  the  outdoor  scene  is  subjected  to  the full gambit of the environmental and weather conditions. 




go to Forensic 


Forensic scientists may encounter blood spatter at a scene which may be pure or a mixture of fly artifacts and human bloodstains. It is important to be able to make an informed identification, or at least advanced documentation of such stains since the mechanics of production of fly artifacts are not determinable to the crime scene reconstructionist from regular police forces. We describe three cases in which experiments and crime scene reconstruction led to additional information. Case 1: Above the position of a victim, numerous blood stains of the low-high velocity type were found. Exclusion of these stains being caused by force (but instead caused by the activity of adult blow flies) by use of the following observations that were confirmed in experiments: a) Sperm-/tadpole-like structure with length > width, b) random directionality c) mixture of round symmetrical and teardrop shaped stains. Case 2: A reddish spatter field was found on a fan chain two rooms away from the place where a dead woman was found. Localization of the spatter on the bottom end of the surface hinted strongly towards fly activity. Case 3: Double homicide; submillimeter stains were found on a lamp between the two corpses. Activity of flies was less likely compared to alternative scenario of moving lampshade and violent stabbing.





Blood Stains
Initial observation of the scene gave the appearance of extensive low, medium and high velocity blood spatters. Above the position of one of the victims numerous stains of the low-high velocity type were found (fig. 1). Similar areas were found on a kitchen hanging lamp, the interior and exterior of the entry door, the bathroom, the two bedrooms and the walls around the victims. The stains were tested positive for blood with a quick test for hemoglobin (Hemastix/Heglostix)
The first assumption to be made was that there had been slinging of a lot of blood around the kitchen and living room. This would suggest not only gunshot wounds, but considerable movement of the victim and suspect(s). It could suggest a motive of robbery, burglary, assault, or a surprise attack. Examination of the kitchen and living room did neither indicate struggling or fighting to any great amount. In the bedrooms and bathroom there were flies, but no signs of bloodstain patterns. There were no maggots in these rooms. The conclusion we made was that not much activity had taken place in the bedrooms or the bathroom of an assaultive nature and the bloodshed had taken place in the kitchen and living room.
Recostructing the angle of impact of many of those stains, however, led nowhere. There was no indication that the bodies had been moved and there were no signs of a struggle in the bedrooms, or bathroom. Smaller, round type spatters were mostly < 3 mm in length and > 1  mm in diameter. Furthermore, stains of a sperm-like shape (irregular, uneven form with tail much longer than the body) as well as a missing systematic directionality were observed. Since all stains were composed of blood, how did they (a) get into all of the rooms and (b) transferred to the walls?



Conclusion
With information that stains appearing as human blood spatters were fly artifacts, coupled with other scene evidence, we felt confident that the possibility of an execution or revenge slaying could be put into the mix of suspect behaviors at our crime scene.

4. Case :  Corpse of Lonely Woman
 A dead female person was found in her bedroom in an urban appartment. The body had entered dried-out state of decay with severe undernourishment during lifetime and an underlying minimal greenish discoloration of the face and the abdominal area after death. In the anal region of the corpse, few blow fly maggots (oldest larval stage L3) were found. As soon as the windows were opened, adult Lucilia sp. entered the room. Therefore and because of numerous dots in the face of the dead person, the police asked if blow flies had been present, or if those dots had to be attributed to a source to be investigated on.
The windows were closed before the police entered which explained the presence of only few flies, mostly pupae of phorids (Diptera: Phoridae), was in accordance with the reconstruction of events. Apart from piles of empty pizza delivery cardboard boxes and cigarette butts, which did not provide food sources for blow flies, the appartment was very clean and expensively furnished. The bathtub was half filled with discolorated water that was most likely used to wash clothing.

Since the entrance door was regularly locked and no signs of a violent fight were present, a reddish spatter field at a fan chain in the kitchen became of interest . The kitchen was located two rooms away from the sleeping room and there was no visible evidence that linked the kitchen to any violent event. Closer examination led to the conclusion that the stains were fly artifacts. Since the eyes of the corpse were still intacts and not used as a food resource by maggots, it was concluded that only very few adult individuals of a smaller fly species had been living in the appartment at some point before, or at the time of death. Those few individuals used the fan chain as a resting place and deposited reddish material with a typical preference fort he lower border of the surface. The same effect is present  under laboratory conditions, yet in a much larger scale, where the flies also preferred the bottom border of the hanging piece of paper.
Because of the nature of the stains, they were neither taken into account for the further police investigation nor the reconstruction of the events at the scene. The case was considered to be self neglect in contrast to killing, or neglect by another person.

5. Case : Slaying of mother and child
 the dead bodies of a mother and her child were found in the living room of their house on the border of the city of Cologne, Germany. They had been dead for around six hours. Another child that had been sleeping upstairs was alive and not hurt. Blood stain patterns were used to determine the course of events.
The crime scene reconstruction based on blood spatter became important to check the statements of an accused man who owned a knife that was used for the stabbing. For legal technicalities (rights of inheritance) it also became important if the woman, or her child had been killed first. Thridly, the defense lawyer wanted to proof that his client had stabbed the child with brutal force to make clear that his client had no mental control in the moment he performed the stabbing. Apart from medico-legal considerations, it was thought that the velocity of the blood spatter might help to address theses questions.

Amongst numerous other reddish stains in the house (in this case, due to a local police procedure, all stains determined as originating from the victims by DNA typing), few very small stains on a lamp were observed. This lamp was located only ca. 1,80 m over ground and had been hanging directly between the locations where the two bodies were found. The police asked if these stains were caused by the impact of violence, or by flies. As in most cases, the presence of flies was not looked at by the first team which entered the house through a window. After that, all flies may have flown out of the window. Therefore, a combined blood spatter and forensic entomology expert statement was asked for by the police and later again requested by the judge during the trial.

The tiny, round stains on the lamp were distributed over the complete surface. Genetic fingerprinting led to one conclusive DNA type out of six stains (DNA of the child was found in one stain, no result in the other stains). It was discussed that the stains might have originated from the offender´s knife that got stuck in the vertebra of the child (as documented by the forensic pathologist). When the offender took the knife out of the bone with a jerk, few tiny droplets of blood may have been distributed with a relatively high initial velocity but got slowed down due to the resistance of the air.

Practical hints


From our case work experience and from our experiments, the following suggestions and techniques are offered for use in differentiating between fly artifacts and human bloodstain patterns .
1. Document fly activity at a scene. Flies will be at a scene if access to the scene is available to them. They will stay at the scene as long as a food source is available to them and/or as long as they are trapped. Therefore, check for dead flies, too. If evidence of flies is present at the scene, assume that fly artifacts will be at the scene. Follow standard protocols of description of insects at crimes scenes – where, when, how many?
2.   Document the range of stains. Fly activity will often concentrate near light sources, on light colored walls, windows and mirrors. They will often be present in rooms away from the body. Compare stains away from the body with stains near the body.
3. Compare stains with known fly artifact patterns.
4. Identify suspected human bloodstain patterns that are of the "spot" or "tear" drop pattern that offer a potential for use in reconstruction and eliminate the following:
a. Stains that have a tail/body (Ltl/Lb) ratio greater than one,
b. Stains with a tadpole/sperm type structure,
c. Stains with a sperm cell type structure that do not end in a small dot,
d. Any stains without a distinguishable tail and body,
e. Any stains with a wavy and irregular linear structure,
f. Any stains that do not participate in directionality consistent with other stains that suggest a point of convergence at a point of origin. Larger fly artifacts, within a group, will point in all directions. Cast off human blood will produce stains, within a group, that indicates a common general convergence point.
5.  Note the absence of known human bloodstain pattern characteristics. The absence of misting around a concentrated mass would suggest the stains might not be from human cast off blood origin. Within a group, human cast off patterns often leave secondary wave cast off patterns and run off patterns.
6. Cover blood stains, especially on the floor, with paper sheets to prevent them being destroyed by investigators walking on the stains.
7. One or two stains do not make a case. Stains that could be fly artifacts should be eliminated and an evaluation based upon stains that can be explained in terms of origin and relevance to the reconstruction.
8. Use a high resolution camera with a macro lens and include a scale in every single picture.
Forensic scientists, crime scene technicians and investigators may encounter blood spatter at a scene which may be pure or a mixture of fly artifacts and human bloodstains. It is important to be able to make an informed identification, or at least advanced documentation of such stains.


progress made synthetic blood  :



 

Artificial Blood Is Patient-Ready

In the midst of news that engineered organs are being implanted into animals and people, researchers announce the creation of artificial blood for transplant.

A new source of blood could be just around the corner: red blood cells grown from fibroblasts that have been reprogrammed into mature red blood cells in the lab. The blood, developed by researchers at the University of Edinburgh and the Scottish National Blood Transfusion Service (SNBTS), would be Type O negative, also known as universal donor blood, which currently comprises just 7 percent of the blood donor pool. “We have made red blood cells that are fit to go in a person’s body,”

 

The blood is created by dedifferentiating fibroblasts from an adult donor and reprogramming them into induced pluripotent stem cells (iPSCs), which are then cultured in a bone-marrow-like environment for a month. Blood cells are then extracted from the cell culture. If the technique can be scaled up to industrial levels (which is no trivial task), beyond potentially supplying an endless supply of life-giving blood, the artificial blood would consist entirely of young, healthy, and infection-free cells, avoiding the issues of pathogen contamination that have in the past plagued the donor blood supply.
“Although similar research has been conducted elsewhere, this is the first time anybody has manufactured blood to the appropriate quality and safety standards for transfusion into a human being,” Turner told The Telegraph.
The artificial blood could be transfused into patients in a clinical trial setting as early as 2016, likely for three patients suffering from a genetic disorder called thalassaemia, in which the body makes unusually low levels of hemoglobin—a problem that is treated frequent transfusions.
Correction (April 17): This story has been updated from its original version to correctly reflect that the researchers are deriving blood cells, not serum, from iPSCs, and that the cells themselves are not artificial. The Scientist regrets the errors. 


Artificial Blood Substitutes

– Update on the Promise of a Medical Breakthrough –

Blood substitutes — also called oxygen therapeutics or hemoglobin-based oxygen carriers (HBOCs) — offer the promise of new and important life-saving medical treatments.
Blood is a vital, life-sustaining fluid that picks up oxygen in the lungs and then carries it to the heart and the rest of the body. Blood performs many functions such as transporting nutrients from the digestive system, removing toxins and waste, and fighting germs.
Blood is composed of a watery substance called plasma as well as three different types of cells or parts of cells that float in the plasma. The formed elements are red blood cells (RBCs), white blood cells (WBCs), and platelets.
White blood cells are part of the body’s immune system that destroys viruses and bacteria, the pathogens that cause infections. Platelets form clots to prevent bleeding from cuts and small wounds. RBCs account for more than 90% of the formed elements in the blood.
These abundant cells transport oxygen and carbon dioxide via blood vessels called arteries and veins. RBCs are disc-shaped with a large surface area for absorbing and releasing oxygen.
These cells do not have a nucleus in the center, but instead contain a complex molecule — hemoglobin (Hb) — that collects and releases oxygen.

Blood Transfusion

If a patient looses too much blood during a traumatic injury or a surgical operation, he may need a blood transfusion. Despite the nation’s numerous blood banks, there is a critical shortage of human blood available today for medical purposes. Nearly 33% of Americans will need a lifesaving blood transfusion at some point in their lifetime.
With 4.5 million Americans receiving blood transfusions each year, the number of patients requiring blood is now outpacing the number of blood donors. Although the American blood supply is generally safe, small amounts of the blood stored in blood banks may be contaminated with HIV and hepatitis virus.

Limitations

Human blood has other limitations as well. It must be stored at a cool temperature and it has a shelf life of only 42 days. For these reasons, blood may not be readily available when needed in an emergency situation — on the battlefield or in an ambulance transporting an injured, bleeding patient to the hospital.
The need for safe artificial blood is even greater for many people outside the United States. In sub-Saharan Africa, for example, blood loss accounts for an estimated 44% of women who die in childbirth. In many countries in the Developing World, blood is not screened for infectious pathogens that cause HIV, hepatitis, and syphilis.

Artificial Blood Advantages

Artificial blood has several advantages over human blood. Because blood substitutes belong to the universal blood group O negative, they can be given to patients regardless of their blood type. Patients administered artificial blood will not experience immunologic reactions, but they would face serious health problems if they received incompatible donated blood.
When blood substitutes are manufactured they can be sterilized to destroy bacteria and viruses. This eliminates the risk for infectious diseases in a blood transfusion – a major issue in many parts of sub-Saharan Africa. With a longer shelf life than human blood, some blood substitutes can be stored for one to three years without refrigeration.
Artificial blood can be safely shelved outside hospitals and then rapidly administered to patients in emergency situations. Also, patients whose religious beliefs prevent them from accepting blood from donors would benefit from blood substitutes such as PFCs that are not derived from blood products.

Oxyglobin

Oxyglobin is the only blood substitute approved for use in veterinary medicine in the United States and Europe. A safe and effective blood substitute is urgently needed for human blood transfusions in hospitals, at accident sites, and on battlefield filled with injured military workers. An efficient oxygen-transporting blood substitute for humans would also be an important therapy for aplastic anemia and swollen tissues in sickle-cell anemia.
Over the last three decades medical scientists have made some progress in the discovery of human blood substitutes. Currently, two main types of artificial blood products — hemoglobin-based oxygen carriers (HBOCs) and perflourocarbons (PFCs) — are either being tested or are already on the market for human use.
To be effective, a blood substitute has to function like hemoglobin in carrying oxygen to organs and cells inside the patient’s body. The problem, however, is that hemoglobin outside of RBCs is toxic. Pure hemoglobin injected into the body causes blood vessels to tighten, leading to high blood pressure, capillary collapse, and sometimes heart attacks, strokes, and death.
Without its RBC wrapping, hemoglobin can produce swelling and fevers. These unwanted side effects are one of the main reasons why blood substitutes made from hemoglobin are so difficult to make.

HBOCs and PFCs

Pharmaceutical companies attempted to develop HBOCs (also called oxygen therapeutics) and PFCs starting in the 1980s and at first seemed to have some success. However, the results of most human clinical trials have been disappointing. A study published in 2008 the Journal of the American Medical Association summarized the results of 16 clinical trials on five different blood substitutes administered to 3,500 patients.
Those receiving blood substitutes had a threefold increase in the risk of heart attacks compared with the control group given human donor blood. However, a closer analysis of the results showed that some of the negative statistics were misleading.
The artificial blood products reviewed in this study varied in their benefits and risks, and some blood substitutes had very few serious side effects. The findings suggest that some blood substitutes may be safer and more beneficial than scientists originally thought.


Summary of Key Blood Substitutes Approved, In Clinical Trials, or Withdrawn

Blood Substitute
Blood Substitute Class
Clinical Trials
Approval
Fluosol-DA-20 PFC Clinical Trials completed in 1980s: Discontinued due to side effects Approved in 1989;Withdrawn in 1994
Oxygent PFC Phase Clinical III trials: Increased risk of stroke No Approval; Phase III trials stopped
Perftoran  PFC Completed (Russia) Approved in Russia, Mexico
Oxycyte PFC Phase II Clinical Trials (traumatic brain injury) umderway in Switzerland and Israel No Approval; Further research needed
PHER-O2 PFC Pre-clinical Trials umderway No Approval’ Further research needed
Oxyglobin HBOC Trials completed by late 1990s: Canine anemia Approved: Veterinary Medicine
Hemopure HBOC Completed (South Africa) Approved (South Africa); May be withdrawn
PolyHeme HBOC Phase III Trial (U.S.): Increased side effects in treatment group; no difference in 30=-day survival rate No Approval; Further research needed
MP4OX (Hemospan) HBOC Phase II Trials (U.S.): Raised oxygen levels without serious side effects No Approval; Further research needed
Hemotech HBOC Phase I Trials: No toxicity No Approval; Further research needed
Engineered Hemoglobin HBOC Preliminary studies: Minimal side-effects; good oxygen delivery No Approval; Further research needed

Perfluorocarbon (PFC) Blood Substitutes


Perfluorocarbons (PFCs) are totally synthetic artificial blood products derived from fluorine- and carbon-containing chemicals. They are chemically inert, but more effective than water or blood plasma in dissolving and absorbing oxygen in the lungs and then transporting oxygen throughout the body. PFCs remain in the bloodstream for about 48 hours. Because of their oxygen-dissolving ability, PFCs were the first group of artificial blood products studied by scientists. They are the first generation blood substitutes. Unlike the red colored HBOCs, PFCs are usually white. However, since they do not mix with blood they must be emulsified before they can be given to patients. PFCs are such good oxygen carriers that researchers are now trying to find out it they can reduce swollen brain tissue in traumatic brain injury. PFC particles may cause flu-like symptoms in some patients when they exhale these compounds.

Examples of PFC Blood Substitutes

Fluosol-DA-20
Fluosol-DA-20, manufactured by Green Cross of Japan, was the first and only oxygen-carrying blood substitute ever to receive approval from the FDA. Although approved in 1989, it was withdrawn in 1994 because it was cumbersome to administer to patients and it had side effects.

Oxygent
Oxygent, developed by Alliance Pharmaceutical Corporation in San Diego, is a PFC-based oxygen carrier currently approved for Phase II trials in both Europe and the United States. Oxygent initially showed promise for decreasing the need for donated blood during surgery. However, phase III trials were stopped recently because patients receiving Oxygent showed a higher risk of stroke compared to controls receiving donor blood.

Perftoran
Perftoran, sponsored by Moscow, Russia, is a PFC emulsion approved for human use in Russia in 1996. In 2005, the same drug was registered and approved as an authorized blood substitute for use in Mexico under the trade name Perftec, distributed by KEM Laboratory in Mexico.

Oxycyte
Oxycyte — a third-generation perfluorocarbon (PFC) therapeutic oxygen carrier sponsored by Synthetic Blood International in Costa Mesa, California — is designed to transport oxygen to damaged tissues and carry carbon dioxide to the lungs for removal. With an oxygen-carrying capacity up to five times that of hemoglobin, Oxycyte may be beneficial for traumatic brain injury, sickle cell crisis, heart attack, and wound care as well as for blood transfusion. It has been approved for Phase II clinical trials on traumatic brain injury in Switzerland and Israel, but more research is needed before it can be deemed safe and effective as a blood substitute.

PHER-O2
PHER-O2, developed by Sanguine Corporation in Pasadena, CA, is a PFC with oxygen-carrying capabilities and reportedly few side effects. This drug is now under evaluation not only as a blood substitute for transfusion, but also as a therapy for heart attack and stroke.

Hemoglobin-based Oxygen Carrier (HBOC) Blood Substitutes


HBOCs are manufactured from sterilized hemoglobin and look somewhat like real blood. These dark red or burgundy colored blood substitutes are often made from RBCs of expired human blood, cow blood, hemoglobin-producing genetically modified bacteria, or human placentas. The artificial hemoglobin molecules are modified to create a sturdy structure and to function without the protective cover of RBCS. Through a chemical process called polymerization, two or more three molecules bonded together to form a larger HBOC molecule. HBOCs are smaller than natural RBCs. While natural RBCs remain in the bloodstream for about 100 days, HBOCs circulate in human blood for only a day. Side effects of HBOCs may include elevated blood pressure, abdominal discomfort, and a temporary reddish coloration of the eyes or skin.

Examples of HBOC Blood Substitutes


Hemopure
Hemopure, sponsored first by Biopure Corporation and later by OPK Biotech, is currently used in hospitals in South Africa. This oxygen therapeutic drug was approved by the Government of South Africa because of the country’s widespread HIV contamination of the blood supply. However, it recently has been targeted for removal from the market in South Africa. Hemopure is made from chemically stabilized, cross-linked cow hemoglobin using a fairly simple and less expensive biotechnology than required for other HBOC blood substitutes. Its minute size – not more than 1/1000 the size of RBCs – is advantageous for transporting oxygen into small spaces between cells. Compared to human donor blood, Hemopure delivers oxygen more quickly to target areas of the patient’s body.

PolyHeme
PolyHeme, sponsored by Northfield Laboratories in Chicago, is a first-generation polymerized hemoglobin-based oxygen-carrying hemoglobin solution. It was developed after the Vietnam War for emergency treatment in trauma situations of blood major loss. In the mid-2000s Polyheme was compared with donor blood in a clinical trial of more than 700 people in a US Phase III Trial. Patients receiving Polyheme had a slightly higher rate of negative side effects such as high blood pressure, inflammation, and multiple organ failure compared with the control group. (The small size of the PolyHeme molecule causes it to bind with nitric oxide, leading to constricted blood vessels.) However, here was no difference between the drug and control groups in the survival rate at 30 days. Although Northfield Laboratories has stopped manufacturing Polyheme, scientists and doctors working with this artificial oxygen carrier claim that more research is needed before its benefits versus risks can be conclusively determined.

MP4OX (Hemospan)
MP4OX (formerly known as Hemospan), sponsored by Sangart of San Diego, is a promising powdered form of artificial blood that can be mixed with liquid for transfusion. It is made from expired human blood combined with an added compound, polyethylene glycol, to minimize toxicity. With a capacity to enhance oxygen transfer
from RBCs to tissues, MP4OX is designed to supplement the body’s own ability to transport oxygen. Currently in Phase II trials in the United States, MP4OX effectively raised oxygen levels in patients without serious side effects.

Hemotech
Hemotech, produced by HemoBiotech in Dallas, TX, is a proprietary, chemically modified hemoglobin manufactured from cow blood. It was originally developed in 1985. With a shelf life of more than six months, if has shown no signs of toxicity in clinical studies. Hemotech is currently approved by the FDA for Phase I trials in the United States.

Engineered Hemoglobin
Scientists at the University of Essex in the United Kingdom are evaluating a new patent-pending engineered hemoglobin to serve as a blood substitute. The novel molecule is designed for optimal oxygen delivery. If successful, this innovative blood substitute could deliver a rich supply of oxygen to the tissues with almost no toxicity to the body.

The Future of Blood Substitute Products

Although research on artificial blood has not yet led to an approved drug on the market today, considerable progress has been made since 1978 when the first clinical trial of an HBOC was conducted. New technologies that may yield blood substitutes for human use in the future include blood pharming (using stem cells extracted from umbilical cords) and nanometer-sized water-soluble dendrimers — highly branched, star-shape molecules — to make plastic blood. As scientists learn more about how natural RBCs function in the body, they will come closer to inventing a blood substitute for humans that has few side effects, an increased oxygen-carrying capacity, and a longer-lasting survival time in the human body.

Senin, 02 Mei 2016

Hand and Foot brake so do Parking brake until knocking accelerate of system hall unlimited in to finite to ROBO SPRING

The hand brake was almost always mechanical in nature, actuating either the traditional Drum brake mechanism via a lever (as opposed to a hydraulic wheel cylinder).  It's been called the "emergency" brake, the "parking" brake, or the handbrake.  Its fulfilled all sorts of non mainstream braking duties.
There have been some really hairbrained handbrake designs over the years, including some absurd (and mostly useless) miniature drum brake assemblies that were INSIDE the core of the disk rotor on a disk brake car.  Saab even had them inside the front (!) brake disks, where they were nearly completely useless and actually caused major problems as they decayed over time.
Nowadays, they tend to operate a parallel either mechanical, or electromechanical braking system, with a supplemental caliper (in disk brake cars) that works via electromechanical actuators (solenoids as an example) to clamp the rotor.  so do  Aston Martin had 2 complete caliper assemblies on the rear wheel as an example...  the core hydraulic caliper that did most braking duties, and the mechanical one opposite it.  Audi has moved (with Porsche) to electrically actuated brake calipers for the parking brake function (they even had a goofy corporate switch used in most Porsche/Audis) . 

SO DO  

It depends on the car, but in older cars the hand brake just activated the rear wheels while the pedal would brake all four wheels. Typically the hand brake is mechanical in nature using a cable while normal brakes use hydraulic systems - often boosted with engine vacuum. Thus the hand brake was termed an "emergency" brake as it would continue to function even if the main hydraulic system went out.

Towing companies tow cars with the parking brake on either by towing from the other end, opening the car and releasing the brake, hauling it up onto a flatbed using a winch or by putting a dolly under the wheels of the car being towed.  

SO DO 

The brake pedal operates all four wheel brakes hydraulically. Engine power used to boost this braking action- meaning you can brake harder with less muscle effort.
The hand brake is a separate mechanical system which usually operates on the rear wheels only. Some vehicles may have the hand brake act on the front wheels, or (in the case of my Land Rover) on a completely independent brake on the drive shaft. Its purpose is to hold the vehicle stationary while parked. Also for hill starts, you can hold the vehicle with the hand brake, and release it while you apply accelerator with your right foot. It's not designed to be used when moving.
In the USA, it's common to use the park position on an automatic transmission to keep a parked vehicle stationary,so the hand brake may go unused. It's somewhat misleadingly termed the 'emergency brake'. While it can be used to stop the vehicle if the hydraulic braking system has completely failed, great care is needed to prevent locking the rear wheels and losing control.  


Many people think you only need to use your parking brake when parking on a hill or if your car has a manual transmission.
This is incorrect; whether your car is a manual or automatic, the terrain is hilly or flat, you should use your parking brake every time you park.
A car is held in park by a device inside the transmission called a parking pawl.
The parking pawl can break or become dislodged and the car will roll away, although there is a low chance this will occur, but it could happen nonetheless.  


Parking pawl

The parking brake will hold the car in place while it is parked and will help protect the transaxle, constant velocity joints, and transmission.
A parking brake is capable of a stronger hold than only putting the car in “park”, which of course you still need to do when you park your vehicle. Additionally, if your car was hit while parked, the parking brake would provide further stability, lessening the risk of your car rolling away. You should set the parking brake while your foot is still on the brake pedal and before shifting into park, this reduces the strain on the parking pawl.
Parking brakes can be hand-operated levers located in the center console, foot operated on the floor, sometimes on the dash and operated electronically in newer vehicles.  


hand parking brakeparking brake on the floor  

o set the hand operated parking brake, pull up on the lever and you will hear a clicking sound, to release the parking brake, press the button on the end of the brake handle and lower the lever. In vehicles where the parking brake is operated by foot, the pedal is located on the far left side of the driver’s pedal area. To set the brake, push firmly on the pedal with your foot until you hear it clicking.
Depending on your vehicle, there are a number of ways to release the parking brake on the floor.  In some vehicles, the pedal is pushed again with your foot and is released; in other vehicles you must pull on a brake release lever located near the parking brake pedal; if in doubt check your owner’s manual.  

Don't forget to disengage the parking brake before driving again, (see dashboard icon). It is obviously not good for your car and could be embarrassing for you. Setting the parking brake when you park and disengaging the parking brake before you drive should become a good habit, so you should never forget to do either part. Remember the old adage "If you don't use it, you will lose it"  


Electronic Parking Brakes  

 

Electric parking brake works with the push of a button  

Take a new luxury car out on the test drive and you'll probably notice one important difference as you're parking: The expected pedal or handbrake lever has been replaced by a single button or switch.

So what's the point? Actually it makes sense on many counts.
These new electronic parking brake (EPB) systems, once you're used to them, are very convenient. There's no guessing whether it's properly engaged or not—that's all done by electronics, and all you need to do is switch it on or off. And yes, they operate independently of the primary braking system.
The idea was completely new when we first encountered an EPB in the 2002 BMW 7-Series, nearly ten years ago. That model marked the debut of the electronic parking brake in the U.S. market, with the 2003 Jaguar S-Type and 2003 Lincoln LS also among the first.
Now you're quite likely to see electric parking brakes when shopping; they're in everything from the 2011 Subaru Legacy to the 2011 Ford Mustang.
But deployment has been sluggish. According to TRW Automotive, just about ten percent of new cars in North America will have EPB systems by 2015.
They're catching on slower in the U.S. than in some other markets, such as Europe for one important reason: "In North America, adoption of this technology has lagged other regions primarily as a result of a higher percentage of automatic transmissions and drivers using their parking brake less often," said TRW Automotive in a recent release.
For those with a manual transmission, the electronic system automatically holds the vehicle in place and, in most cases, will release it when needed to allow a smooth start on a hill.
While it might sound more complex, electronic parking brakes save weight—up to 16 pounds versus a conventional drum-in-hat system. Fundamentally, it's also a simpler system, with fewer adjustments required and, says TRW, fewer warranty claims.
The only negative to this setup that we've seen is that manufacturers haven't been altogether consistent about how you engage and disengage the systems. Some are mounted on the center console, others on the dash—some in a place that requires craning your neck around the steering wheel to see it—and some you pull up or back to engage, others you push in.
Safety for emergency braking one other major advantage to EPB setups. Manual handbrake levers can lock up the rear wheels quite easily if you're attempting an emergency stop on anything but dry pavement. EPB mechanisms work with the anti-lock braking system, as the electronics are integrated—and it can even be configured to brake with all four wheels under emergency situations.
Another safety feature that's built into most EPB systems but isn't often touted is that they include an auto-apply feature: Say the driver steps out of the vehicle, thinking that the brake has already been applied, and the vehicle starts rolling. In that case, the parking brake automatically cinches up—and knows to because it's tied in with the door switch and seatbelt switches.
So if you have some hesitation in letting electronics do the work, keep in mind that someday they could save you.

2016 Nissan Murano, Maxima recalled for braking problem   

 Hasil gambar untuk electronic braking spring  Hasil gambar untuk electronic braking spring  Hasil gambar untuk electronic braking spring  

Hasil gambar untuk electronic braking spring  Hasil gambar untuk electronic braking springHasil gambar untuk electronic braking spring Hasil gambar untuk electronic braking spring Hasil gambar untuk electronic braking spring  Hasil gambar untuk electronic braking spring  

 Hasil gambar untuk electronic braking spring    Hasil gambar untuk electronic braking spring  

Hasil gambar untuk electronic braking spring  Hasil gambar untuk electronic braking spring  

Electronic Brake Monitoring


700x585.png
Verifying proper brake setup and operation on commercial drum and air disc brake equipped vehicles has historically been a significant problem in the industry.  While daily pre-trip brake inspections are a CDL (Commercial Driver’s License) requirement, they are seldom performed due to the time and difficulty required to conduct these inspections.  This has been historically true on drum brake equipped vehicles, and is even more of an issue on today’s air disc equipped vehicles.
Based on this need, MGM has designed and developed e•STROKE®, an electronic brake monitoring system for drum and air disc braked commercial vehicles.  This system utilizes patented sensing technology to monitor brake stroke and convey this information to an electronic control unit (ECU) for analysis.  This system can be utilized to assist in daily brake inspections, as well as provide continuous real-time brake monitoring on any air brake equipped vehicle.
These systems can detect the following braking issues or potential problems: improper automatic slack adjuster operation or maintenance, caliper internal adjuster mechanism failure (disc brakes), improper brake set-up or adjustment, air leaks or an improperly operating air system, defective air brake control valves, worn foundation components (i.e. worn bushings etc.), defective or worn spring parking brakes, and ice in the air system. brake  brake to ENTERING  ROBO SPRING 

 Hasil gambar untuk robospring 

working ROBO SPRING :

ROBO SPRING  in the science and technology of robo, vision, perception, control, automation, and machine learning. to be concern hail from a variety of engineering, scientific, and mathematical backgrounds, united by a passion for robo and a desire to advance robo technologies to benefit humanity. ROBO SPRING  variety of industries including robo , aerospace, automotive, industrial automation and defense;








TRANSFORMROBO SPRING